05059 PSOT03 - PSOT36C Only One Name Means ProTek’Tion™ 500 WATT TVS ARRAY Description The PSOT series are transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection against ESD, tertiary lightning and switching transients. This series offers low clamping voltage for the protection of sensitive interfaces. The PSOT series has a peak pulse power of 500 Watts for an 8/20µs waveshape and is available in either a bidirectional or unidirectional configuration. This series meets the IEC 61000-4-2, 61000-4-4 and IEC 61000-4-5 requirements. sot-23 package Features applications • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGround) & Level 3 (Line-Line) • 500 Watts Peak Pulse Power per Line(tp = 8/20µs) • Low Clamping Voltage • Bidirectional and Unidirectional Configurations • Available in Multiple Voltages Ranging from 3V to 36V • RoHS Compliant • REACh Compliant • RS-232, RS-422 & RS-423 • Cellular Phones • Controlling & Monitoring Systems • Handheld Devices • Wireless Bus Protection mechaniCal characteristics • Molded JEDEC SOT-23 Package • Approximate Weight: 8 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 PIN CONFIGURATIONs 1 1 3 3 2 2 UNIDIRECTIONAL 05059.R11 8/10 BIDIRECTIONAL Page 1 www.protekdevices.com 05059 PSOT03 - PSOT36C Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 500 Watts Peak Pulse Power (tp = 8/20µs) - See Figure 1 TL -55 to 150 °C Storage Temperature Operating Temperature TSTG -55 to 150 °C Forward Voltage @ 100mA, 300µs, Square Wave - See Note 1 VF 1.5 Volts NOTES 1. Applies to unidirectional pins only. ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1) device marking RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) @ I P = 1A VC VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) VWM VOLTS MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE @ 8/20µs VC @ I PP @V WM ID µA @0V, 1MHz C pF PSOT03 03 3.3 4.0 6.5 10.9V @ 43.0A 125 500 PSOT03C 03C 3.3 4.0 7.0 10.9V @ 43.0A 125 300 PSOT05 05 5.0 6.0 9.8 13.5V @ 42.0A 20 350 PSOT05C 05C 5.0 6.0 9.8 13.5V @ 42.0A 20 210 PSOT08 08 8.0 8.5 13.4 16.9V @ 34.0A 10 250 PSOT08C 08C 8.0 8.5 13.4 16.9V @ 34.0A 10 150 PSOT12 12 12.0 13.3 19.0 25.9V @ 21.0A 2 150 PSOT12C 12C 12.0 13.3 19.0 25.9V @ 21.0A 2 90 PSOT15 15 15.0 16.7 24.0 30.0V @ 17.0A 1 100 PSOT15C 15C 15.0 16.7 24.0 30.0V @ 17.0A 1 60 PSOT24 24 24.0 26.7 43.0 49.0V @ 12.0A 1 88 PSOT24C 24C 24.0 26.7 43.0 49.0V @ 12.0A 1 63 PSOT36 36 36.0 40.0 51.0 76.8V @ 9.0A 1 80 PSOT36C 36C 36.0 40.0 51.0 76.8V @ 9.0A 1 60 NOTES 1. Part Numbers with an additional “C” suffix are bidirectional devices, i.e., PSOT05C. 05059.R11 8/10 Page 2 www.protekdevices.com 05059 PSOT03 - PSOT36C Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 500W, 8/20µs Waveform 100 10 0.1 10 100 td - Pulse Duration - µs Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 10,000 figure 3 power derating curve Peak Pulse Power 8/20µs 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 figure 2 pulse wave form 120 IPP - Peak Pulse Current - % of IPP 1 0 05059.R11 8/10 5 10 15 t - Time - µs 20 25 0 30 Page 3 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 www.protekdevices.com 05059 PSOT03 - PSOT36C Only One Name Means ProTek’Tion™ typical device characteristics figure 4 overshoot & clamping voltage for PSOT05C 40 5 Volts per Division 30 20 10 0 ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape) 05059.R11 8/10 Page 4 www.protekdevices.com 05059 PSOT03 - PSOT36C Only One Name Means ProTek’Tion™ SPICE MODEL figure 1 spice model for ABD ABD ABD Lg 0.6nH Lg 0.6nH UNIDIRECTIONAL BIDIRECTIONAL ABD - Avalanche Breakdown Diode (TVS) Lg - Lead Inductance table 1 - spice parameters PART NUMBER 05059.R11 8/10 parameter unit abd(tvs) BV V See Table 2 IBV µA 1 Cjo pF See Table 2 IS A See Table 2 Vj V 0.6 M - 0.33 N - 1 RS Ohms See Table 2 TT s 1E-8 EG eV 1.11 table 2 - abd specific spice parameters i s (amps) bv(volts) cjo(pF) rs(ohms) PSOT03 4.5 438 1E-11 0.21 PSOT05 6.0 284 1E-11 0.14 PSOT08 8.5 146 1E-11 0.28 PSOT12 13.3 123 1E-13 0.40 PSOT15 16.7 102 1E-13 0.52 PSOT24 26.7 61 1E-13 1.54 PSOT03C 4.5 219 1E-11 0.21 PSOT05C 6.0 142 1E-11 0.14 PSOT08C 8.5 73 1E-11 0.28 PSOT12C 13.3 62 1E-13 0.40 PSOT15C 16.7 51 1E-13 0.52 PSOT24C 26.7 30 1E-13 1.54 Page 5 www.protekdevices.com 05059 PSOT03 - PSOT36C Only One Name Means ProTek’Tion™ sot-23 package information outline dimensions dim millimeters A L inches min max min max A 2.80 3.04 0.110 0.120 B 1.20 1.40 0.047 0.055 C 0.89 1.11 0.035 0.044 D 0.37 0.50 0.015 0.020 G 1.78 2.04 0.070 0.081 H 0.013 0.100 0.001 0.004 J 0.085 0.177 0.003 0.007 K 0.45 0.60 0.018 0.024 L 0.89 1.02 0.035 0.040 S 2.10 2.50 0.083 0.098 V 0.45 0.60 0.018 0.024 3 B 1 0°-10° S 2 K V J G C D H NOTES 1. 2. 3. 4. Controlling dimension: inches. Dimensioning and tolerances per ANSI Y14.5M, 1985. Pin 3 is the cathode (Unidirectional Only) Dimensions are exclusive of mold flash and metal burrs. A pad layout dimensions dim millimeters inches min max min max A 0.71 0.97 0.028 0.038 B 1.88 2.13 0.074 0.084 C 0.71 0.97 0.028 0.038 D 0.81 1.07 0.032 0.042 B NOTES D 1. Controlling dimension: inches. 05059.R11 8/10 C Page 6 www.protekdevices.com 05059 PSOT03 - PSOT36C Only One Name Means ProTek’Tion™ TAPE AND REEL P0 t 10 Pitches Cumulative Tolerance on Tape. ± 0.2 P2 D E Top Cover Tape Pin 1 A0 F W K0 B0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P tmax 3.15 ± 0.10 2.77 ± 0.10 1.30 ± 0.10 1.55 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.228 Notes 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Suffix - T13 = 13” Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and date code. Package outline, pad layout and tape specifications per document number 06012.R2 8/10. ORDERING INFORMATION base PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PSOTxx/PSOTxxC -LF -T7 3000 7” n/a PSOTxx/PSOTxxC -LF -T13 10,000 13” n/a 05059.R11 8/10 Page 7 www.protekdevices.com 05059 PSOT03 - PSOT36C Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05059.R11 8/10 Page 8 www.protekdevices.com