FFB20UP20DN_F085 10A, 200V Ultrafast Dual Rectifiers tm Features Description High Reverse Voltage : VRRM = 200V The FFB20UP20DN_F085 is an ultrafast rectifier. It has a low forward voltage drop and is a silicon nitride passivated ion-implanted epitaxial planar construction. Avalanche Energy Rated Planar Construction This device is intended for use as a freewheeling/clamping rectifier in a variety of switching power supplies and other power switching applications. Its low stored charge and hyperfast recovery minimize ringing and electrical noise in many power switching circuits, thus reducing power loss in the switching transistors. Applications Output Rectifiers Switching Mode Power Supply Free-wheeling diode for motor application Power switching circuits Qualified to AEC Q101 RoHS Compliant Pin Assignments Absolute Maximum Ratings TC = 25°C unless otherwise noted Symbol Parameter Ratings Units VRRM Peak Repetitive Reverse Voltage 200 V VRWM Working Peak Reverse Voltage 200 V VR DC Blocking Voltage 200 V If(avg) Average Rectified Forward Current 10 A IFSM Non-repetitive Peak Surge Current 60Hz Single Half-Sine Wave 100 A TJ, TSTG Operating Junction and Storage Temperature -55 to +175 °C @ TC = 155oC Thermal Characteristics TC = 25°C unless otherwise noted Symbol RθJC1 Parameter Maximum Thermal Resistance, Junction to Case Max Units 3.5 °C/W Package Marking and Ordering Information Device Marking F20UP20DN Device FFB20UP20DN_F085 ©2010 Fairchild Semiconductor Corporation FFB20UP20DN_F085 Rev. A Package TO-263 1 Reel Size 13” Tape Width 24mm Quantity 800 www.fairchildsemi.com FFB20UP20DN_F085 10A, 200V Ultrafast Dual Rectifiers February 2010 Symbol VF 2 Parameter ο Min. Typ. Max Units IF = 10A IF = 10A TC = 25 C TC = 150οC - - 1.15 1.0 V V IR 2 VR = 200V VR = 200V TC = 25οC TC = 150οC - - 10 250 µA µA trr IF =1A, di/dt = 200A/µs, VCC = 130V IF =10A, di/dt = 200A/µs, VCC = 130V TC = 25 οC TC = 25οC - 15 27 25 40 ns ns ta tb Qrr IF =10A, di/dt = 200A/µs, VCC = 130V TC = 25οC TC = 25οC TC = 25οC - 21 6 50 - ns ns nC WAVL Avalanche Energy (L = 20mH) 10 - - mJ Notes 1: Rth_jc value is specified for each die 2: Pulse: Test Pulse width = 300S, Duty Cycle = 2% 2 FFB20UP20DN_F085 Rev. A 2 FFB20UP20DN_F085 10A, 200V Ultrafast Dual Rectifiers Electrical Characteristics TC = 25°C unless otherwise noted www.fairchildsemi.com 100 10 Reverse Current, IR [µA] Forward Current, IF [A] 20 o TC = 175 C o TC = 100 C 1 o TC = 25 C 10 o TC = 175 C 1 0.1 o TC = 100 C 0.01 o TC = 25 C 0.1 0.2 0.4 0.6 0.8 Forward Voltage, VF [V] 1.0 1E-3 1.2 Figure 1. Typical Forward Voltage Drop Reverse Recovery Time, trr [ns] Capacitance, cj [pF] 100 TC = 175 C o TC = 150 C 4 o TC = 25 C 2 150 200 di/dt [µ/s] 250 300 30 o TC = 150 C 25 o TC = 25 C 100 150 200 di/dt [A/µs] 250 300 12 10 DC 8 6 4 2 0 120 130 140 150 160 Case Temperature, TC (oC) 170 Figure 6. Case Temperature, Tc [oC] Figure 5. Typical Reverse Recovery Current FFB20UP20DN_F085 Rev. A 35 Average Recitified Forward Current, IF(AV) [A] Reverse Recovery Current, Irr [A] o 6 100 o TC = 175 C 40 Figure 4. Typical Reverse Recovery Time 8 0 50 IF = 10A 45 20 50 100 Figure 3. Typical Junction Capacitance IF = 10A 200 50 f = 1MHz 1 10 Reverse Voltage , VR [V] 50 100 150 Reverse Voltage , VR [V] Figure 2. Typical Reverse Current 400 10 0.1 0 3 www.fairchildsemi.com FFB20UP20DN_F085 10A, 200V Ultrafast Dual Rectifiers Typical Characteristics TC = 25°C unless otherwise noted Figure 7. Gate Charge Characteristics Figure 8. Capacitance vs Drain to Source Voltage Figure 9. Maximum Continuous Drain Current vs Ambient Temperature Figure 10. Forward Bias Safe Operating Area FFB20UP20DN_F085 10A, 200V Ultrafast Dual Rectifiers Typical Characteristics TC = 25°C unless otherwise noted Figure 11. Single Pulse Maximum Power Dissipation Figure 12. Transient Thermal Response Curve FFB20UP20DN_F085 Rev. A 4 www.fairchildsemi.com tm tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. FFB20UP20DN_F085 10A, 200V Ultrafast Dual Rectifiers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower™ PowerTrench® FRFET® The Power Franchise® ® Auto-SPM™ Global Power ResourceSM PowerXS™ Green FPS™ Build it Now™ Programmable Active Droop™ Green FPS™ e-Series™ CorePLUS™ QFET® TinyBoost™ QS™ Gmax™ CorePOWER™ TinyBuck™ Quiet Series™ GTO™ CROSSVOLT™ TinyCalc™ IntelliMAX™ RapidConfigure™ CTL™ TinyLogic® ISOPLANAR™ Current Transfer Logic™ ™ TINYOPTO™ ® MegaBuck™ DEUXPEED TinyPower™ Dual Cool™ Saving our world, 1mW/W/kW at a time™ MICROCOUPLER™ TinyPWM™ EcoSPARK® SignalWise™ MicroFET™ TinyWire™ EfficentMax™ SmartMax™ MicroPak™ TriFault Detect™ SMART START™ MicroPak2™ ® TRUECURRENT™* SPM® MillerDrive™ μSerDes™ STEALTH™ MotionMax™ Fairchild® SuperFET™ Motion-SPM™ Fairchild Semiconductor® SuperSOT™-3 OptiHiT™ FACT Quiet Series™ UHC® SuperSOT™-6 OPTOLOGIC® FACT® ® Ultra FRFET™ ® OPTOPLANAR SuperSOT™-8 FAST ® UniFET™ SupreMOS™ FastvCore™ VCX™ SyncFET™ FETBench™ VisualMax™ Sync-Lock™ FlashWriter® * PDP SPM™ XS™ ®* FPS™ Power-SPM™ F-PFS™ LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I47 FFB20UP20DN_F085 Rev. A 5 www.fairchildsemi.com