Ordering number : ENA0950 Monolithic Linear IC LA5753MP Separately-excited Step-down Switching Regulator (12V) Overview The LA5753MP is a separately-excited step-down switching regulator (12V). Features • High efficiency • Four external parts • Time-base generator (60kHz) incorporated • Current limiter incorporated • Thermal shutdown circuit incorporated • Soft start circuit incorporated Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Input voltage VIN max Output current IO max SW pin application reverse voltage Vsw Allowable power dissipation Pd max Conditions Ratings Unit 30 Mounted on a specified board. * V 3 A -1 V 3.9 W Junction temperature Tj max 150 °C Operating temperature Topr -30 to +125 °C Storage temperature Tstg -40 to +150 °C * Mounted on a specified board: 114.3mm × 76.1mm × 1.6mm, Copper foil ratio 60% FR4 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 91907 MS PC B8-8722 No.A0950-1/5 LA5753MP Recommended Operating Conditions at Ta = 25°C Parameter Symbol Input voltage range VIN Operating junction temperature range Tj op Conditions Ratings Unit 15 to 28 V -30 to +150 °C Electrical Characteristics at Ta = 25°C Parameter Symbol Ratings Conditions min Output voltage VO VIN = 24V, IO = 1.0A Efficiency η VIN = 24V, IO = 1.0A typ 11.5 Unit max 12.0 12.5 V 90 48 % Switching frequency f VIN = 24V, IO = 1.0A 60 72 kHz Line regulation ∆VOLINE VIN = 18 to 28V, IO = 1.0A 60 130 mV Load regulation ∆VOLOAD VIN = 24V, IO = 0.5 to 1.5A 10 30 Output voltage temperature coefficient ∆VO/∆Ta Ripple attenuation factor RREJ f = 100 to 120Hz Current limiter operating voltage IS VIN = 24V Thermal shutdown operating temperature TSD Thermal shutdown hysteresis width ∆TSD ±1.0 mV mV/°C 45 dB Designed target value* 165 °C Designed target value* 15 °C 3.1 A * Designed target value: No measurement made. Package Dimensions unit : mm (typ) 3275 Pd max -- Ta 4.5 1.5 9.9 1.3 4.5 (8.8) 1.2 10.0 (1.6) 0.9 1.7 0.2 0.4 1 5 2.7 SANYO : SMP5 Allowable power dissipation, Pd max -- W 4.5 Mounted on a specified board: 114.3×76.1×1.6mm3 Copper foil ratio 60% FR4 4.0 3.90 3.5 3.0 2.5 2.0 1.5 1.0 0.78 0.5 0 -30 -20 0 20 40 60 80 100 120 Ambient temperature, Ta -- °C 140 160 MSG07022 Pin Assignment (1)VIN (2)SWOUT (3)GND (4)VOS (5)SS No.A0950-2/5 LA5753MP Block Diagram VIN 1 2 SWOUT Reg. OCP OSC Reset Drive Comp. TSD 4 VOS Amp. VREF 5 SS 3 GND Application Circuit Example L1 150µH VIN SWOUT LA5753MP D1 SBD C1 1000µF C2 1000µF VOS SS GND C3 1µF Notes: C3 is for the soft start function. Delete C3 and keep the SS pin open when the soft function is not necessary. No.A0950-3/5 LA5753MP Description of Functional Settings 1.Start delay function The SS pin has the internally-connected 22µA (typ) constant-current supply. When the voltage of SS pin exceeds the threshold voltage, the regulator starts operation. As the threshold is 0.62V(typ), the start delay time can be calculated as follows: ex. For setting at 1µF Td = C × V 1µ × 0.62 = = 28.2 msec 22µ i 2.Soft start function The internal PWM waveform has the voltage value as shown in the right. If down-conversion from the voltage of VIN = 24V to 12V output to be made, for example, the PWM-ON duty has the value as shown below. PWMduty = VOUT + VF = 53% VIN - Vsat + VF 1.5V 0.62V PWM wave (Note that calculation is made with Vsat = 1V and VF = 0.2V) The output voltage of error amplifier, which is 12V, is the value with PWM = 53%, as calculated in the above equation, so that this voltage is determined as follows: Ver = (∆VPWM) × PWMduty + VPWML = 0.88V × 0.53 + 0.62V = 1.09V (∆VPWM is the PWM amplitude value or 0.88V(typ) while VPWML is the lower limit voltage of PWM waveform or 0.62V(typ)) SS pin and error amplifier output voltages are designed to prefer the lower voltages, so that VOUT will reach the designed regulation voltage in timing when the SS pin voltage exceeds the error amplifier output. Therefore, the soft strt time is calculated as follows: Tss = C × ∆VPWM × PWMduty C × 0.88 × PWMduty = 22µA i For the set conditions of C = 1µF and PWMduty = 53%: Tss = 1µ × 0.88V × 0.53 = 21.2msec 22µA No.A0950-4/5 LA5753MP Timing Chart VIN SWOUT VOUT Td Tss SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of September, 2007. Specifications and information herein are subject to change without notice. PS No.A0950-5/5