Ordering number : ENA0195A Monolithic Linear IC LA6358NJM High-Performance Dual Operational Amplifier Overview The LA6358NJM is a high-performance dual operational amplifier that can operate from a single voltage power supply. It features a built-in phase correction circuit. It can also operate from a dual power supply with both positive and negative levels and features low power consumption. The LA6358NJM can be used in a wide range of industrial applications as a transducer amplifier for all types of transducers, as a DC amplifier circuit, and for other purposes as well. Functions • High-performance dual operational amplifier Specifications Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Maximum supply voltage VCC max 32 Differential input voltage VID 32 V Maximum input voltage VIN max -0.3 to +32 V Allowable power dissipation Pd max Ta≤25°C 300 V mW Operating temperature Topr -40 to +85 °C Storage temperature Tstg -55 to +150 °C Recommended Operating Conditions at Ta = -40 to +85°C Parameter Symbol Ratings Conditions min Supply voltage VCC typ 3 Unit max 24 V Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 90810 SY / 10606 MS OT 20051209-S00012 No.A0195-1/6 LA6358NJM Electrical Characteristics at Ta = 25°C, VCC = 5V Parameter Symbol Conditions Test Circuit Ratings min typ Unit max Input offset voltage VIO 1 ±2 ±7 Input offset current IIO IIN(+)/IIN(-) 2 ±5 ±50 nA Input bias current IB IIN(+)/IIN(-) 3,4 45 250 nA VCC-1.5 V Common-mode VICM input voltage range Common-mode rejection ratio CMR Large-amplitude voltage gain VG Output voltage range 5 VCC = 30V 5 65 80 dB VCC = 15V, RL≥2kΩ 6 25 100 V/mV 11 65 VOUT Supply voltage rejection ratio 0 SVR Channel separation CS Current drain f = 1k to 20kHz ICC Output current (source) Output current (sink) 0 mV 7 8 VCC-1.5 V 100 dB 120 dB 0.5 1.2 mA IO source VIN+ = 1V, VIN - = 0V 9 20 40 mA IO sink VIN+ = 0V, VIN - = 1V 10 10 20 mA Package Dimensions unit : mm 3032D 5.0 5 0.63 4.4 6.4 8 4 0.35 0.15 0.1 (1.5) 1.27 1.7max 1 (0.65) SANYO : MFP8(225mil) Pin Assignment No.A0195-2/6 LA6358NJM Equivalent Circuit Test Circuits 1. Input offset voltage VIO 2. Input offset current IIO 3. Input bias current IB (−) 4. Input bias current IB (+) No.A0195-3/6 LA6358NJM 5. Common-mode rejection ratio CMR Common-mode input voltage range VICN 6. Voltage gain VG 7. Channel separation CH sep 8. Current drain ICC 9. Output current IO source 10. Output current IO sink No.A0195-4/6 LA6358NJM 11. Supply voltage rejection ratio SVR (+) 12. Supply voltage rejection ratio SVR (-) No.A0195-5/6 LA6358NJM Application Circuit Examples Noninverting DC amplifier Inverting DC amplifier Square wave generator SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of September, 2010. Specifications and information herein are subject to change without notice. PS No.A0195-6/6