RD0506LS-SB5 Ordering number : ENA1611 SANYO Semiconductors DATA SHEET RD0506LS-SB5 Diffused Junction Silicon Diode Ultrahigh-Speed Switching Diode Features • • • • • High breakdown voltage (VRRM=600V). High reliability. Easy to be mounted, good heat dissipation. Fast reverse recovery time. Low noise at the time of reverse recovery. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage VRRM Average Output Current Surge Forward Current IO IF(RMS) IFSM Junction Temperature Tj Storage Temperature Tstg R.M.S Forward Current Conditions Ratings Tc=25°C (SANYO’s ideal heat dissipation condition) Package limited Sine wave, 10ms single pulse Unit 600 V 5 A 12 A 120 A 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Reverse Voltage Forward Voltage Reverse Current Reverse Recovery Time Thermal Resistance Symbol Ratings Conditions min typ max VR VF IR IR=1mA IF=5A 600 trr1 trr2 Rth(j-c) IF=5A, di / dt=100A/μs 44 IF=0.5A, IR=1A 17 V 1.3 VR=600V Between the junction part and the case : smoothing current Unit 1.6 V 50 μA 50 ns ns 6.25 °C / W Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. www.semiconductor-sanyo.com/network N1809SA TK IM TC-00002176 No. A1611-1/3 RD0506LS-SB5 Package Dimensions unit : mm (typ) 7510-001 4.5 10.0 2.8 0.9 0.6 1.2 14.0 3.6 1.0 16.1 16.0 3.5 7.2 3.2 0.7 0.75 1 : Cathode 2 : Anode 2 2.4 1 2.55 SANYO : TO-220FI(LS)-SB 2.55 IF -- VF Junction Capacitance, Cj -- pF 1.0 7 5 3 2 --40 °C 20° C 70° C 25° C 0.1 7 5 3 2 0.01 7 5 3 2 0 0.2 0.4 0.6 0.8 1.0 1.2 Forward Voltage, VF -- V 100 7 5 3 2 1.4 Current waveform 50Hz sine wave 120 IS 20ms t 110 100 90 80 70 60 0.01 2 3 5 7 0.1 2 3 Time, t -- s 5 7 0.1 1.6 2 7 1.0 2 3 IT14316 3 2 5 7 1.0 3 5 7 10 2 3 5 7 100 IT14315 2 3 5 7 10 IT15207 Reverse Voltage, VR -- V IT14314 IFSM -- t 130 Surge Forward Current, IFSM(Peak) -- A f=100kHz 10 Transient Thermal Resistance Rth(j-c) -- °C / W 0.001 Cj -- VR 3 2 Ta= 1 Forward Current, IF -- A 10 7 5 3 2 Rth(j-c) -- t 10 7 5 3 2 1.0 7 5 3 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 Time, t -- s 5 7 1.0 No. A1611-2/3 RD0506LS-SB5 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of November, 2009. Specifications and information herein are subject to change without notice. PS No. A1611-3/3