FR1601G - FR1607G Pb 16.0 AMPs. Glass Passivated Fast Recovery Rectifiers TO-220AB RoHS COMPLIANCE Features Glass passivated chip junction. High efficiency, Low VF High Current capability High reliability High Surge current capability Low power loss For use in low voltage , high frequency inventor, free wheeling and polarity portection application Green compound with suffix "G" on packing code & prefix "G" on datecode. Mechanical Data Cases: TO-220AB Molded plastic Epoxy: UL 94V-O rate flame retardant Terminal : Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed Polarity: As marked Dimensions in inches and (millimeters) High temperature soldering guaranteed: 260oC/10 seconds .16"(4.06mm) from case. Weight: 2.24 gram Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol FR 1601G FR 1602G FR 1603G FR 1604G FR 1605G FR 1606G FR 1607G Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified @Tc = 105℃ Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method ) I(AV) 16.0 A IFSM 150 A Maximum Instantaneous Forward Voltage @ 8.0A VF 1.3 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ IR 5.0 100 uA Typical Junction Capacitance (Note 1) Cj 60 pF Typical Reverse Recovery Time (Note 2) TRR Typical Thermal Resistance (Note 3) RθJC 3.0 TJ -65 to +150 O C -65 to +150 O C Operating Temperature Range Storage Temperature Range TSTG 150 250 500 nS O C/W Note 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 2. Reverse rRecovery Time Condition : IF=0.5A, IR=1.0A, IRR=0.25A 3. Mount on P.C. Board with 2"x3"x0.25" Al plate Page :1 of 2 Version : C09 Page :2 of 2 Version : C09