MBR30H100CT CREAT BY ART Pb 30.0AMPS. Schottky Barrier Rectifiers TO-220AB RoHS COMPLIANCE Features UL Recognized File #E-326243 Low power loss, high efficiency High current capability, low forward voltage drop Plastic material used carriers Underwriters Laboratory Classification 94V-0 High surge current capability Guard-ring for overvoltage protection For use in low voltage - high frequency inventor, free wheeling, and polarity protection application High temperature soldering guaranteed: 260℃/10 seconds/.375", (9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Qualified as per AEC-Q101 Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: TO-220AB Terminals: Pure tin plated leads, solderable per MIL-STD-202, Method 208 guaranteed Dimensions in inches and (millimeters) Marking Diagram Polarity: As marked MBR30HXXXCT = Specific Device Code Weight: 1.92 grams G = Green Compound Mounting torque: 5 in- lbs, max Y = Year Mounting position:Any WW = Work Week Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol MBR30H100CT Unit Maximum Repetitive Peak Reverse Voltage VRRM 100 V Maximum RMS Voltage VRMS 70 V Maximum DC Blocking Voltage VDC 100 V Maximum Average Forward Rectified Current IF(AV) 30 A Peal Repetitive Forward Current(Rated VR, Square Wave, 20KHz) IF(RMS) 30 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load IFSM 150 A Peak Repetitive Reverse Surge Current (Note 1) IRRM 1 A Maximum Instantaneous Forward Voltage IF=15A, TA=25℃ IF=15A, TA=125℃ IF=30A, TA=25℃ IF=30A, TA=125℃ Maximum Reverse Current @ Rated VR (Note 2) 0.85 VF V 0.75 0.98 0.85 TA=25 ℃ TA=125 ℃ IR 10 uA 2 mA V/us Voltage Rate of Change,(Rated VR) dV/dt 10000 Typical Junction Capacitance (Note 3) Cj RθjC 400 TJ - 65 to + 175 O C - 65 to + 175 O C Typical Thermal Resistance (Note 4) Operating Temperature Range Storage Temperature Range TSTG pF O 2 Note 1: 2.0uS Pulse Width, f=1.0KHz Note 2: Pulse Test : 300uS Pulse Width, 1% Duty Cycle Note 3: Measure at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Note 4: Heatsink Size (4" x 6" x 0.25") Al-Plate Version:E11 C/W RATINGS AND CHARACTERISTIC CURVES (MBR30H100CT) FIG.1 FORWARD CURRENT DERATING CURVE FIG. 2 MAXIMUM FORWARD SURGE CURRENT 30 150 PEAK FORWARD SURGE A CURRENT (A) AVERAGE FORWARD A CURRENT (A) 35 25 20 15 10 RESISTIVE OR INDUCTIVELOA 5 0 0 8.3mS Single Half Sine Wave JEDEC Method 125 100 75 50 25 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 1 o LEAD TEMPERATURE ( C) FIG. 3 TYPICAL FORWARD CHARACTERISRICS 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4 TYPICAL REVERSE CHARACTERISTICS 10000 REVERSE LEAKAGE CURRENT (uA) FORWARD CURRENT (A) 100 TA=150℃ 10 TA=125℃ 1 TA=25℃ TA=150℃ 1000 TA=125℃ 100 10 1 0.1 TA=25℃ 0.01 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FORWARD VOLTAGE (V) 0.8 0.9 10 1 30 40 50 60 70 80 90 100 FIG. 6 TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG FIG. 5 TYPICAL JUNCTION CAPACITANCE 1000 100 TRANSIENT THERMAL IMPEDANCE (℃/W) JUNCTION CAPACITANCE (pF) A 20 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 100 10 10 1 0.1 0.1 1 10 REVERSE VOLTAGE (V) 100 0.01 0.1 1 10 100 T-PULSE DURATION(s) Version:E11