Preliminary MBRF30L45CT - MBRF30L100CT Pb 30.0 AMP. Schottky Barrier Rectifiers ITO-220AB RoHS COMPLIANCE Features Low power loss, high efficiency. High current capability, Low forward voltage drop. Plastic material used carries Underwriters Laboratory Classifications UL 94V-0 High surge current capability. Guard-ring for transient protection. For use in low voltage, high frequency inventor, free wheeling, and polarity protection application. High temperature soldering guaranteed: 260℃ /10 seconds /.375”,(9.5mm) lead lengths at 5 lbs., (2.3kg) tension Mechanical Data Dimensions in inches and (millimeters) Cases: JEDEC ITO-220AB Molded plastic Terminal: Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed Polarity: As marked Mounting position : Any Mounting Torque : 5 in-lbs. max. Weight: 2.24 gram Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol MBRF30L45CT MBRF30L60CT MBRF30L100CT Units Maximum Recurrent Peak Reverse Voltage VRRM 45 60 100 V Maximum RMS Voltage VRMS 31 42 70 V VDC 45 60 100 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length @TC = 120℃ Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) At TC = 130℃ Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse surge Current (Note 1) Maximum Instantaneous Forward Voltage at (Note 2) IF=15A TC =25 ℃ IF=15A TC =125 ℃ IF=30A TC =25 ℃ IF=30A TC =125 ℃ Maximum DC Reverse Current @ TA=25 ℃ at Rated DC Blocking Voltage @ TA=100 ℃ Voltage rate of change (rated VR) Typical Junction Capacitance (Note 2) Typical Thermal Resistance per leg.(Note 3) Operating Temperature Range Storage Temperature Range I(AV) 30 A IFRM 30 A IFSM 220 A IRRM VF IR 1 2 2 0.55 0.50 0.74 0.67 0.60 0.56 0.75 0.70 0.66 0.57 0.80 0.66 0.4 200 0.48 130 0.2 15 10,000 dV/dt Cj 600 A V mA V/uS 460 460 Pf O RθJC 4.0 TJ -65 to +150 O C -65 to +175 O C TSTG Notes: 1. 2.0Us PU;SE WIDTH. F=1.0kh, Continue 10 cycles 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 3. Thermal Resistance from junction to case Per Leg, with Heatsink size (4"x6"x0.25") Al-plate. Version : D09 C/W RATINGS AND CHARACTERISTIC CURVES (MBRF30L45CT - MBRF30L100CT) FIG 2 Maximum Forward Surge Current FIG.1 Forward Current Derating Curve Peak Forward Surge Current (A) Average Forward Current (A) 30 25 20 15 10 5 0 0 50 100 220 200 180 160 140 120 100 80 60 40 20 0 1 150 Case Temperature (oC) 10 100 Number of Cycles at 60 Hz FIG 3 Maximum reverse leakage current FIG 4 Maximum reverse leakage character 100 100 Reverse lreakage current (uA) Forward current (A) 30L45CT Ta=125oC 10 30L60CT 30L45CT Ta=125oC Ta=25oC 1 30L60CT Ta=25oC 0.1 10 Ta=125oC Ta=25oC 1 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 20 Forward Voltage (V) 60 80 100 120 140 Percentage of VR (%) FIG 6 Typical Transient Thermal Rresistance FIG 5 Typical Junction Capacitance 10 Transient Thermal Resistance (oC/W) 1000 Capacitance (pF) 40 100 1 0.1 10 1 10 Reverse Voltage (V) 100 0.01 0.1 1 10 T, pulse Duration (Sec) Version : D09 100