MBRS25H45CT CREAT BY ART 25.0AMPS Surface Mount Schottky Barrier Rectifier D2PAK Pb RoHS COMPLIANCE Features UL Recognized File # E-326854 Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High Surge capability For use in low voltage, high frequency inverters, , free wheeling, and polarity protection applications Guarding for over voltage protection High temperature soldering guaranteed: 260℃/ 10 seconds at terminals Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Marking Diagram 2 Case: JEDEC D PAK molded plastic Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked G = Green Compound Mounting position: Any Y = Year Weight: 1.41 grams WW = Work Week MBRS25H45CT = Specific Device Code Maximum Ratings and Electrical Characteristic Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol MBRS25H45CT Unit Maximum Repetitive Peak Reverse Voltage VRRM 45 V Maximum RMS Voltage VRMS 31 V Maximum DC blocking voltage VDC 45 V Maximum Average Forward Rectified Current @Tc = 155℃(Total Device) IF(AV) 25 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 150 A Maximum Instantaneous Forward Voltage at (Note 1) IF = 12.5A, Ta=25℃ IF = 12.5A, Ta=125℃ IF = 25A, Ta=25℃ IF = 25A, Ta=125℃ VF Maximum Reverse Current TA=25 ℃ TA=125 ℃ IR 0.2 15 mA mA Voltage rate of change (Rated VR) dV/dt 10,000 V/uS Maximum Thermal Resistance Per Leg (Note 2) RθJC RθJA 1.5 50 TJ -65 to + 175 O TSTG -65 to + 175 O Operating Temperature Range Storage Temperature Range 0.70 0.60 V 0.90 0.75 O C/W C C Note1: Pulse Test : 300us Pulse Width, 1% Duty cycle Note2 Thermal Resistance from Junction to Case Per Leg Version:C11 RATINGS AND CHARACTERISTIC CURVES (MBRS25H45CT) Fig. 2 Maximum Non-Repetitive Forward Surge Current Per Leg Fig.1 Maximum Forward Current Derating Curve 150 Resistive or Inductive 25 Peak Forward Surge Current (A) Average Forward Current (A) 30 20 15 10 5 25 50 75 100 125 Case Temperature (℃) 150 75 50 25 0 175 1 10 Number of Cycles at 60 Hz 100 Fig. 4 Typical Reverse Characteristics Per Leg Fig. 3 Typical Forward Characteristics Per Leg 100 100 0 0 8.3ms Single Half Sine Wave JEDEC 125 Instantaneous Reverse Current. (mA) Instantaneous Forward Current (A) 100 TA=125℃ 10 TA=25℃ 10 1 TA=125℃ 0.1 0.01 0.001 TA=25℃ 0.0001 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 Forward Voltage (V) Transient Thermal Impedance (℃/ W) 100 0 20 40 60 80 100 Percent Of VR (%) 120 140 Fig. 5 Typical Transient Thermal Impedance Per Leg 10 1 0.1 0.01 0.1 1 10 100 t-Pulse Duration(s) Version:C11