TS9013 500mA Low Quiescent Current CMOS LDO SOT-89 Pin Definition: 1. Ground 2. Input 3. Output SOT-223 Pin Definition: 1. Input 2. Ground 3. Output General Description TS9013 is a positive voltage regulator developed utilizing CMOS technology featured very low power consumption, low dropout voltage and high output voltage accuracy. Built in low on-resistor provides low dropout voltage and large output current. A 2.2uF or greater can be used as an output capacitor. TS9013 are prevented device failure under the worst operation condition with both thermal shutdown and current fold-back. These series are recommended for configuring portable devices and large current application, respectively. Features ● Output current up to 500mA ● Low power consumption, 15uA(typ) @Vo=5V ● Output voltage ±2% ● Internal current limit ● Thermal shutdown protection Applications ● ● ● ● ● ● Palmtops Video recorders Battery powered equipment PC peripherals CD-ROM, DVD ROM Digital signal camera Block Diagram Ordering Information Part No. Package Packing TS9013xCW RP SOT-223 2.5Kpcs / 13” Reel TS9013xCW RPG SOT-223 2.5Kpcs / 13” Reel TS9013xCY RM SOT-89 1Kpcs / 7” Reel TS9013xCY RMG SOT-89 1Kpcs / 7” Reel Note: Where x denotes voltage option, available are D=1.8V, K=2.5V, S=3.3V, 5=5.0V “G” denotes for Halogen Free Typical Application Circuit 1/5 Version: E11 TS9013 500mA Low Quiescent Current CMOS LDO Absolute Maximum Rating Parameter Symbol Limit Unit Input Supply Voltage VIN 6.5 V Output Current Io 500 mA SOT-89 Power Dissipation (without heat sink) 0.5 PD SOT-223 Operating Junction Temperature Range Tj Storage Temperature Range W 0.7 TSTG -40 ~ +150 o -65 ~ +150 o o Lead Soldering Temperature (260 C) 5 Notes: Stress above the listed absolute rating may cause permanent damage to the device. C C S Electrical Characteristics (Ta = 25oC unless otherwise noted) Parameter Conditions Min Typ Max TS90135 4.90 5.0 5.10 VIN=Vo + 1V, TS9013S 3.23 3.3 3.36 Io =1mA, TS9013K 2.45 2.5 2.55 TS9013D 1.76 1.8 1.83 TS90135 4.85 5.0 5.10 VIN=Vo + 1V, TS9013S 3.20 3.3 3.36 Io =1mA ~ 500mA TS9013K 2.42 2.5 2.55 TS9013D 1.74 1.8 1.83 500 -- -- mA -- 0.2 0.3 % -- 40 80 Output Voltage Maximum Output Current VIN=Vo+1V, Input Stability VO+1V ≤ Vin ≤ VO+2V, Io=1mA Load Regulation (Note1) VIN=Vo+1V, TS90135 1mA ≤ IL ≤ 500mA TS9013S VIN=Vo+1V, TS9013K 1mA ≤ IL ≤ 500mA TS9013D Io=300mA Dropout Voltage (Note 2) Io=500mA Io=500mA Quiescent Current VIN=Vo+1V, Io=0A Output Current Limit VOUT < 0.4V Power Supply Rejection Ratio TS90135 TS9013S TS90135 TS9013S TS9013K TS9013D At f=100KHz, Io=10mA Output Voltage Temperature Unit V V mV -- 40 90 -- 300 500 -- 500 600 -- 600 850 -- 15 25 uA 550 -- -- mA -- 30 -- dB mV o -100 -ppm/ C Coefficient (Note 3) Notes: a. Regulation is measured at constant junction temperature, using pulsed ON time. b. Dropout is measured at constant junction temperature, using pulsed ON time, and the criterion is VOUT inside target value +/-3%. 2/5 Version: E11 TS9013 500mA Low Quiescent Current CMOS LDO SOT-89 Mechanical Drawing DIM A B C D E F G H I J SOT-89 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 4.40 4.60 0.173 0.181 1.40 1.75 0.055 0.069 2.40 2.60 0.094 0.102 0.36 0.48 0.014 0.018 1.40 1.60 0.054 0.063 2.90 3.10 0.114 0.122 0.89 1.20 0.035 0.047 -4.25 -0.167 1.40 1.60 0.055 0.068 0.38 0.43 0.014 0.017 Marking Diagram Y M L X = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Fixed Output Voltage Code D=1.8V, K=2.5V, S=3.3V, 5=5.0V. 3/5 Version: E11 TS9013 500mA Low Quiescent Current CMOS LDO SOT-223 Mechanical Drawing DIM A B C D E F G H I J K SOT-223 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 6.350 6.850 0.250 0.270 2.900 3.100 0.114 0.122 3.450 3.750 0.136 0.148 0.595 0.635 0.023 0.025 4.550 4.650 0.179 0.183 2.250 2.350 0.088 0.093 0.835 1.035 0.032 0.041 6.700 7.300 0.263 0.287 0.250 0.355 0.010 0.014 10° 16° 10° 16° 1.550 1.800 0.061 0.071 Marking Diagram Y M L X = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Fixed Output Voltage Code 18=1.8V, 25=2.5V, 33=3.3V, 50=5.0V. 4/5 Version: E11 TS9013 500mA Low Quiescent Current CMOS LDO Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 5/5 Version: E11