W005 - W10 Single Phase 1.5 AMPS. Silicon Bridge Rectifiers RB-15 Features UL Recognized File # E-96005 Surge overload ratings to 40 amperes peak Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260 oC / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension Mechanical Data Case: Molded plastic Lead: solder plated Polarity: As marked Weight: 1.07 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA = 50 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.5A Symbol W005 W01 W02 W04 W06 W08 W10 Units VRRM 50 100 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V I(AV) 1.5 A IFSM 40 A VF 1.0 V o 10 uA 500 uA Typical Thermal Resistance (Note) RθJA 36 o C/W RθJL 13 o Operating Temperature Range TJ -55 to +125 C o Storage Temperature Range TSTG -55 to +150 C Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. With 0.4” x 0.4” (10mm x 10mm) Copper Pads. Maximum DC Reverse Current @ TA=25 C at Rated DC Blocking Voltage @ TA=125 oC IR Version: A06 RATINGS AND CHARACTERISTIC CURVES (W005 THRU W10) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 10 1.0 0.8 0.6 0.4 0.2 PEAK FORWARD SURGE CURRENT. (A) 50 80 100 60 o AMBIENT TEMPERATURE. ( C) 40 20 120 140 FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT INSTANTANEOUS REVERSE CURRENT. ( A) 1.2 0 Tj=125 0C 1 0.1 Tj=25 0C 0.01 0 40 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 30 FIG.4- TYPICAL JUNCTION CAPACITANCE 1000 20 600 10 0 1 20 2 5 10 20 NUMBER OF CYCLES AT 60Hz 50 100 FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 500 Tj=25 0C 400 300 200 100 10 INSTANTANEOUS FORWARD CURRENT. (A) FIG.2- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 1.4 JUNCTION CAPACITANCE.(pF) AVERAGE FORWARD CURRENT. (A) 1.6 0 0.1 0.5 1 2 5 10 20 50 100 200 500 800 REVERSE VOLTAGE. (V) Tj=25oC Pulse Width=300 s 1% Duty Cycle 1 0.1 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 FORWARD VOLTAGE. (V) Version: A06