UNISONIC TECHNOLOGIES CO., LTD IMX2 DUAL TRANSISTOR GENERAL PURPOSE DUAL TRANSISTOR FEATURES * Two 2SC2412 chips in a SMT package EQUIVALENT CIRCUITS (6) (5) (4) TR2 (1) TR1 (2) (3) ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free IMX2L-AG6 -R IMX2G-AG6-R SOT-26 Note: Pin Assignment: B: Base C: Collector E: Emitter Pin Assignment Packing 1 2 3 4 5 6 C2 B1 C1 E1 E2 B2 Tape Reel IMX2L-AG6-R (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AG6: SOT-26 (3)Lead Free (3) G: Halogen Free, L: Lead Free MARKING www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd 1 of 2 QW-R215-004.Ba IMX2 DUAL TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C) PARAMETER SYMBOL RATING UNIT Collector-Base Voltage VCBO 60 V Collector-Emitter Voltage VCEO 50 V Emitter-Base Voltage VEBO 7 V Collector Current IC 150 mA Collector Power Dissipation PC 300 (Note 1) mW Junction Temperature TJ 150 °C Storage Temperature TSTG -55~+150 °C Note: 1. 200mW per element must not be exceeded. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C) PARAMETER SYMBOL Collector-Base Breakdown Voltage BVCBO Collector-Emitter Breakdown Voltage BVCEO Emitter-Base Breakdown Voltage BVEBO Collector Cut-Off Current ICBO Emitter Cut-Off Current IEBO Collector-Emitter Saturation Voltage VCE(SAT) DC Current Transfer Ratio hFE Transition Frequency (Note) fT Output Capacitance COB Note: Transition frequency of the device. TEST CONDITIONS IC= 50µA IC= 1mA IE= 50µA VCB= 60V VEB= 7V IC / IB = 50mA/5mA VCE= 6V, IC= 1mA VCE=12V, IE=-2mA, f=100MHz VCB= 12V, IE=0A, f=1KHz MIN 60 50 7 TYP MAX 0.1 0.1 0.4 560 120 180 2 3.5 UNIT V V V µA µA V MHz pF CLASSIFICATION OF hFE RANK RANGE Q 120-270 R 180-390 S 270-560 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R215-004.Ba