UNISONIC TECHNOLOGIES CO., UT912D CMOS IC DECODERS FOR REMOTE CONTROLLER DESCRIPTION SOP-20 The UTC UT912D of CMOS LSIs for remote control system applications are paired with UTC UT912E (refer to the encoder/decoder cross reference table) and is capable of decoding information which consists of N address bits and 12-N data bits. For proper operation, a pair of encoder/decoder with the same number of addresses and data format should be chosen. The UTC UT912D also is arranged to provide 8 address bits and 4 data bits. The decoders receive serial addresses and data from a programmed UTC UT912E of encoders that are transmitted together with the header bits by a RF or an infrared transmission medium upon receipt of a trigger signal. If no error or unmatched codes are found, the input data codes are decoded and then transferred to the output pins. The VT pin also goes high to indicate a valid transmission. DIP-18 FEATURES * Pair with UTC UT912E * Operating voltage: 2.4V ~ 12V * Low power and high noise immunity CMOS technology * Low standby current * Built-in oscillator needs only 5% resistor * Binary address setting * Received codes are checked 3 times * Capable of decoding 12 bits of information * Address/Data number combination: 8 address bits and 4 data bits * Vaild transmission indicator * Minimal external components ORDERING INFORMATION Ordering Number Halogen Free Lead Free UT912DL-D18-T UT912DL-S20-R UT912DL-S20-T UT912DG-D18-T UT912DG-S20-R UT912DG-S20-T www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Package Packing DIP-18 SOP-20 SOP-20 Tube Tape Reel Tube 1 of 8 QW-R502-044.B UT912D CMOS IC ENCODER/DECORDER CROSS REFERENCE TABLE Decoder Part No. Data Pins Address Pins VT Pair Encoder UTC UT912D 4 8 √ UTC UT912E Package Encoder Decoder DIP-14/18 SOP-16/20 DIP-18 SOP-20 PIN CONFIGURATION SOP-20 DIP-18 NC 1 20 NC 17 VT A0 2 19 VDD 16 OSC1 A1 3 18 VT 15 OSC2 A2 4 17 OSC1 14 DIN A3 5 16 OSC2 13 D11 A4 6 15 DIN 7 12 D10 A5 7 14 D11 8 11 D9 A6 8 13 D10 A7 9 12 D9 VSS 10 11 D8 1 A1 2 A2 3 A3 4 A4 5 A5 6 A6 A7 VSS VDD A0 18 9 10 D8 PIN DESCRIPTION PIN NAME I/O A0 ~ A7 I D8 ~ D11 DIN VT OSC1 OSC2 VSS VDD O I O I O INTERNAL CONNECTION DESCRIPTION Input pins for address A0 ~ A7 setting, these pins can be NMOS Transmission Gate externally set to VSS or left open. CMOS OUT Output data pins, power-on state is low. CMOS IN Serial data input pin CMOS OUT Valid transmission, active high Oscillator Oscillator input pin Oscillator Oscillator output pin Negative power supply, (GND) Positive power supply UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 8 QW-R502-044.B UT912D CMOS IC BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 8 QW-R502-044.B UT912D CMOS IC ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT Supply Voltage VDD -0.3 ~ +13 V Input Voltage VIN Vss-0.3 ~ VDD+0.3 V ℃ Operating Temperature TOPR -20 ~ +85 Storage Temperature TSTG -40 ~ +150 ℃ Note:Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (Ta=25℃, VDD=5V, unless otherwise specified.) PARAMETER Operating Voltage SYMBOL VOPR Standby Current ISTN-BY Operating Current IOPR Data Output Current (D8~D11) IDOUT VT Output Current Input Voltage IVT High Low Oscillator Frequency VIH VIL fosc TEST CONDITIONS VDD=5V VDD=12V No load, fOSC=150kHz, VDD=5V VOH=4.5V (Source) VDD=5V VOL=0.5V (Sink) VOH=4.5V (Source) VDD=5V VOL=0.5V (Sink) Oscillator stops Rosc=51KΩ, VDD=5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 2.4 -1 1 -1 1 3.5 0 TYP MAX 5 12 0.1 1 2 4 159 400 -1.99 1.9 -1.564 1.53 5 1 149 UNIT V μA μA mA mA V V kHz 4 of 8 QW-R502-044.B UT912D CMOS IC OPERATION FLOWCHART The oscillator is disabled in the standby state and activated when a logic “high” signal applies to the DIN pin. That is to say, the DIN should be kept low if there is no signal input. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 8 QW-R502-044.B UT912D CMOS IC FUNCTIONAL DESCRIPTION Operation The UTC UT912D offers different packages by various combinations of addresses and data pins to pair with the UTC UT912E. The decoders receive data that are transmitted by an encoder and interpret the first N bits of code period as addresses and the last 12-N bits as data, where N is the address code number. A signal on the DIN pin activates the oscillator, which in turn decodes the incoming address and data. The decoders will then check the received address three times continuously. If the received address codes all match the contents of the decoder-s local address, the 12-N bits of data are decoded to activate the output pins and the VT pin is set high to indicate a valid transmission. This will last unless the address code is incorrect or no signal is received. The output of the VT pin is high only when the transmission is valid. Otherwise it is always low. Decoder timing Address/Data sequence The following provides the address/data sequence table for various models of the UTC UT912D. The correct device should be selected according to the individual address and data requirements. Bits Address/ Data 0 1 2 3 4 5 6 7 8 9 10 11 A0 A1 A2 A3 A4 A5 A6 A7 D8 D9 D10 D11 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 8 QW-R502-044.B UT912D CMOS IC APPLICATION CIRCUITS APPROXIMATE INTERNAL CONNECTION CIRCUITS NMOS Transmission Gate EN OSC1 CMOS OUT Oscillator UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw CMOS IN OSC2 7 of 8 QW-R502-044.B UT912D CMOS IC OSCILLATOR FREQUENCY VS SUPPLY VOLTAGE fosc (Scale) Rosc (Ω ) 4.00 3.50 27kΩ 3.00 30kΩ 33kΩ 2.50 36kΩ 39kΩ 43kΩ 47kΩ 51kΩ 56kΩ 62kΩ 68kΩ 75kΩ 82kΩ 2.00 1.50 100kΩ 120kΩ 150kΩ 180kΩ 220kΩ (100kHz) 1.00 0.50 0.25 2 3 4 5 6 7 8 9 10 11 12 13 VDD (VDC) Note: The recommended oscillator frequency is fOSCD (decoder)≌50 fOSCE (UTC UT912E encoder) U T C a ssu m e s n o re sp o n sib ility fo r e q u ip m e n t fa ilu re s th a t re su lt fro m u sin g p ro d u c ts a t v a lu e s th a t e x c e e d , e v e n m o m e n ta rily , ra te d v a lu e s (su c h a s m a x im u m ra tin g s, o p e ra tin g c o n d itio n ra n g e s, o r o th e r p a ra m e te rs) liste d in p ro d u c ts sp e c ific a tio n s o f a n y a n d a ll U T C p ro d u c ts d e sc rib e d o r c o n ta in e d h e re in . U T C p ro d u c ts a re n o t d e sig n e d fo r u se in life su p p o rt a p p lia n c e s, d e v ic e s o r sy ste m s w h e re m a lf u n c tio n o f th e se p ro d u c ts c a n b e re a so n a b ly e x p e c te d to re su lt in p e rso n a l in ju ry . R e p ro d u c tio n in w h o le o r in p a rt is p ro h ib ite d w ith o u t th e p rio r w ritte n c o n se n t o f th e c o p y rig h t o w n e r. T h e in fo rm a tio n p re se n te d in th is d o c u m e n t d o e s n o t fo rm p a rt o f a n y q u o ta tio n o r c o n tra c t, is b e lie v e d to b e a c c u ra te a n d re lia b le a n d m a y b e c h a n g e d w ith o u t n o tic e . UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 8 QW-R502-044.B