Product Data Sheet EX-380 Series 4 Pin DIP & SMD Evacuated Miniature Crystal Oscillator EMXO™ Features • Supply Voltage: 3.3 Vdc or 5 Vdc • Aging: <1x10-9 /day, <1x10-7 /year (@ 10 MHz) • Temperature Stability: to ±7.5x10-8 over -20°C to +70°C • Acceleration Sensitivity: 1 x10-9/g, Total Gamma • Uses SC Family 3rd Overtone Crystal • Low Power Consumption: <0.35 watts @ +25°C • Frequencies: 10 to 80 MHz for HCMOS or Sinewave outputs • Fast Warm-up: 1 to 2 minutes • Patented Technique* Applications • SONET/SDH, DWDM, FDM, ATM, 3G • Telecom Transmission and Switching Equipment • Wireless Communication Equipment • Military Airborne and Mobile systems Description The model EX-380 Series is a low profile DIP or SMD, Evacuated Miniature Oven Controlled Crystal Oscillator (EMXO), available in frequencies from 10 MHz to 80 MHz. Notes: 1. We acknowledge the support of the U.S. Army for work on resonators associated with this product under contract #1 X66001 - 97-C-8635. *U.S. Patent 5,917,272. The EX-380 Series provides exceptionally low aging rates and high temperature stabilities in an extremely small package over a wide range of environmental conditions. The through hole unit measures only 20.8mm x 13.2mm x 7.6mm (0.82" x 0.52" x 0.30"), @ 10 MHz provides aging rates of <1x109/day average, <1x10-7 for the first year and <1x10-6 for 10 years with temperature stabilities to ±1x10-7 over -40°C to +85°C. Wider temperature ranges are available from -55°C to +85°C. This is achieved by the application of new resonator design concepts and technological breakthroughs. This series of EMXO's bridges the gap between current large, high precision OCXO's and smaller TCXO'S. The EX-380 Series becomes the most economical choice where there is a need for spectral purity, short and long term stability, along with small size and dramatically reduced power consumption. Standard supply voltages for the EX-380 series are 3.3 Vdc and 5Vdc, with HCMOS or Sinewave output options. A surface mount version of this oscillator is available (EX-381/5). Sinewave output is only available in the surface mount, EX-381, version. EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator Performance Characteristics for frequencies in the range 10 to 20.48 MHz Parameter Characteristics Available Frequencies 10 to 20.48 MHz (See Page 6 for specific Freq's) Size See page 4 for outline Drawings and Dimensions Supply Voltage (C) (D) 5.0 Vdc ±5% 3.3 Vdc ±5% Supply Current (Steady State) < 70 mA @ +25°C and 5 Vdc , <90 mA @+25C and 3.3Vdc <120 mA @ -40°C and 5 Vdc, <150 mA @-40C and 3.3Vdc Turn-on current 300 mA maximum @ 5.0 Vdc , 450 mA maximum @ 3.3V Output Type Levels Symmetry (at 50% Vdd) Rise/Fall Time (10%-90%) Stability vs. Temperature NOTE: Tighter stabilities and wider temperature ranges are available, please consult the factory. (A) (G or H) Sinewave into 50 ohms HCM0S, (A) <0.4 Volts, >0.9 Vdd, (G) 0 dBm, (H) +3 dBm (A) 50/50 ±10% (A) <7 ns D-107 = ±0.1 ppm over -20°C to +70°C D-ST3 = Stratum 3 over -20°C to +70°C F-ST3 = Stratum 3 over -40°C to +85°C F-107 = ±0.1 ppm over -40°C to +85°C x-ST3 = Stratum 3 Holdover stability per GR-1244-CORE 280 ppm pk-pk over temperature, < 40 ppb drift. Aging (10 MHz Typical) <1 x 10-9/day average, <1 x 10-7 / year, <1 x 10-6 /10 years Short -Term Stability (Allan Deviation) <5 x 10-10, 0.1 seconds to 10 seconds Phase Noise (Static Conditions) Frequency vs. Supply Warm-up (Restabilization) (frequency relative to that 1 hour after turn-on, following 24 hours off time, at +25°C) Electrical Frequency Adjust Initial Accuracy for Fixed Frequency Acceleration Sensitivity (10 MHz) Offset 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz PhaseNoise -100 dBc/Hz -130 dBc/Hz -140 dBc/Hz -145 dBc/Hz -150 dBc/Hz <2.5 x 10-9 per percent change Standard 60 seconds 120 seconds < ±1 x 10-6 < ±1 x 10-7 Optional (consult factory) 45 seconds 90 seconds A: >±1 ppm range with 0 to Vdd input voltage F: ±1 ppm @ +25°C 1 x 10-9/g Total Gamma, standard 10 (5 x 10- /g available at 10 MHz consult factory) Vectron International • 267 Lowell Road, Hudson, NH 03051 2 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator Performance Characteristics for frequencies in the range 20.5 to 80 MHz Parameter Available Frequencies Size Supply Voltage Characteristics 20.5 to 80 MHz (See Page 6 for specific Freq's) See page 4 for outline Drawings and Dimensions (C) (D) 5.0 Vdc ±5% 3.3 Vdc ±5% Supply Current (Steady State) < 70 mA @ +25°C and 5 Vdc, <90 mA @+25C and 3.3Vdc <120 mA @ -40°C and 5 Vdc, <150 mA @-40C and 3.3Vdc Turn-on current 300 mA maximum @ 5.0 Vdc, 450 mA maximum @ 3.3V Output Type Levels HCM0S, (A) (G or H) Sinewave into 50 ohms (A)<0.4 Volts, >0.9 Vdd Symmetry (at 50% Vdd) (A) 50/50 ±10% Rise/Fall Time (10-90%) (A) <5 ns Stability vs. Temperature NOTE: Tighter stabilities and wider temperature ranges are available, please consult the factory. (G) 0 dBm, (H) +3 dBm D-ST3 = Stratum 3 over -20°C to +70°C D-107 = ±0.1 ppm over -20°C to +70°C (< 50 MHz) F-507 = ±0.5 ppm over -40°C to +85°C F-147 = ±0.14 ppm over -40°C to +85°C (<50 MHz) x-ST3 = Stratum 3 Holdover stability per GR-1244-CORE. 280 ppm pk-pk over temperature, <40 ppb drift. Aging (38.88 MHz Typical) Short Term Stability (Allan Deviation) Phase Noise (Static Conditions) Frequency vs. Supply Warm-up (Restabilization) (frequency relative to that 1 hour after turn-on, following 24 hours off time, at +25°C) Electrical Frequency Adjust Initial Accuracy for Fixed Frequency Acceleration Sensitivity <3 x 10-9/day average, <3 x 10-7 / year, <3 x 10-6 /10 years <5 x 10-10, 0.1 seconds to 10 seconds Offset Phase Noise 10 Hz -80 dBc/Hz 100 Hz -110 dBc/Hz 1 kHz -130 dBc/Hz 10 kHz -135 dBc/Hz 100 kHz -140 dBc/Hz <2.5 x 10-9 per percent change < ±1 x 10-6 Standard 60 seconds Optional (consult factory) 45 seconds < ±1 x 10-7 120 seconds 90 seconds A: >±3 ppm range with 0 to Vdd input voltage F: ±1.5 ppm @ +25°C 1 x 10-9/g Total Gamma, standard Vectron International • 267 Lowell Road, Hudson, NH 03051 3 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator Outline Drawing Marking 380 Package 7.62 MAX (.30 MAX) 5.08 MIN (.20 MIN) Standoff’s 3 places at pins. 0.457 DIA (.018 DIA) Square Corner Pin 1 20.83 (.82) 3.81 (.15) 7.63 (.30) Gnd Pin No Standoff 1 7 14 8 2.54 (.10) CL 13.21 (.52) Pin 1 7 8 14 Function Frequency Adjust * GND, Case Output Supply Pin Numbers do not appear on the unit. * Pin 1 is the Oven Alarm with option G. 15.24 (.60) Marking 381(ht= 0.4") ,385 (ht=0.35") Package Square Corner Pin 1 (0.35" :385, 0.4": 381) 4 PLACES 0.635 MAX (.025 MAX) 1.727 (.068) 2.54 (.100) 2 1 12.70 (.50) Function Frequency Adjust* GND, Case Output Supply Pin Numbers do not appear on the unit. * Pin 1 is the Oven Alarm with option G. 3 4 2.54 (.100) 1.016 DIA (.040 DIA) Pin 1 2 3 4 15.24 (.600) 20.32 (.80) Vectron International • 267 Lowell Road, Hudson, NH 03051 4 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator Temperature ( º C) Recommended Reflow Profile pre-heating 60 to 90 sec. @ 140ºC to 160ºC reflow 40 to 60 sec. @ >183ºC Note: EMXO's are precision subsystems with tolerances measured to ±0.001 ppm. The EX-381/5 series has been designed for pick and place reflow soldering. The suggested reflow profile is shown above. The EX-381/5 may be reflowed one time in the non-inverted state. VI recommends waiting at least two hours after reflow before measuring the unit. Handling Precautions Although protection circuitry has been designed into this device, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. VI employs a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-wide standard has been adopted for the CDM, a standard HBM (resistance = 1500 ohms, capacitance = 100pf) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained by using these circuit parameters. ESD Threshold Voltage Model Threshold Unit Human-Body (HBM) 500 V min Charged-Device 500 V min Vectron International • 267 Lowell Road, Hudson, NH 03051 5 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator Ordering Information EX 380 D A F ST3 A 12.800 MHz Output Frequencies 10.000 MHz 19.440 MHz 77.760 MHz 10.230 MHz 20.000 MHz 80.000 MHz 12.800 MHz 20.480 MHz 13.000 MHz 38.880 MHz 16.384 MHz 40.000 MHz Consult with Factory about availability of frequencies not listed. Package 380 = Thru Hole 381,385 = SMD Supply Voltage C: +5 Vdc ± 5% D: +3.3Vdc ± 5% Output Type A = HCMOS,G*=0 dBm, H*=+3 dBm/ 50 ohms (*=381 only) Other Options A = Standard, No Options (Default) F = Fixed Frequency, No Frequency Adjust G= Fixed Frequency Option & Oven Alarm Option. Temperature & Stability D-107 = ±0.1 ppm over -20°C to +70°C (<50 MHz) D-ST3 = Stratum 3 over -20°C to +70°C F-507 = ±0.5 ppm over -40°C to +85°C F-147 = ±0.14 ppm over -40°C to +85°C (<50 MHz) NOTE: Tighter stabilities and wider temperature ranges are available, please consult the factory. Note: Oven Alarm (into 10k ohm load): Normal: > 0.8Vdd , Error: <0.1Vdd Oven alarm is not available when EFC is specified. Visit our website at www.vectron.com For additional information please contact: www.vectron.com USA: Vectron International • 267 Lowell Road, Hudson, NH 03051 . . . . Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON EUROPE: In Denmark, Finland, Ireland, Israel, Norway, Spain, UK . . . . . . . Tel: 49(0)3328 4284 17 Austria, Belgium, France, Germany, Italy, Luxembourg Netherlands, Sweden, Switzerland, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASIA: In China, Taiwan, Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: + 86 21 28909740 /41 /42 Korea, Singapore, Australia, India . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. ©2001, Vectron International. Rev.2May03