XR-U (HC37 or TO-8) Series Cold Weld Crystal Resonator XR-U (HC37) Series Description Vecton International’s XR-U (HC37) series cold weld crystals provide a precision, high reliability design in a rugged mount. These precision crystals offer excellent industry leading performance characterisitcs and tight stabilities in a wide range of frequencies. Low phase noise, excellent Aging and low g-sensitivty options make this an ideal choice for Radar (LO Reference), Microwave, Satellite, Telemetry, High Reliability (Space-Aerospace) and Military Communication applications. Features • • • • • • • • Applications Industry Standard Base (2 pt, 3 pt, 4 pt blank mounts) Variety of package heights available AT, SC and IT-Cut Fundamental and OT Modes Low Phase Noise, Low G-Sensitivity options Tight Stabilities and Tolerances, Excellent Aging Robust Rugged Design for demanding environments Swept Quartz & Hi-Rel Screening Options Available High Temperature Options to +200oC • • • • • • • Telecommunications Military & Defense Microwave Telemetry Ground and Satellite Communications (Hi-Rel) Radar (LO Reference) Precision Oscillators (TCXO, VCXO, OCXO) Standard Physical Specifications HEIGHT CODE OPTION PACKAGE EXAMPLES XR-U SERIES inches mm 1 0.265 6.73 2 0.250 6.35 3 0.230 5.84 4 0.200 5.08 5 0.155 3.93 Reference dimensions specified in inches and millimeters (mm). Specification subject to change without notice. Vectron International • 4914 Gray Road • Cincinnati, OH 45232 • Tel: 513-542-5555 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Typical Electrical Performance Characteristics AT-CUT VARIETIES Performance Characterisitc Frequency Range Symbol Typical Performance Specifications FO 2.5 MHz to 140 MHz o -55 C to +125 C (high temperature up to +200oC available) Operating Temperature Range Frequency Stability over Operating Temp Range Frequency Calibration Tolerance +25oC Equivalent Series Resistance o FT +/- 5 ppm to +/- 50 ppm (mode, frequency and operating temp range dependent) FR-FL +/- 10 ppm typical (+/- 1 ppm available) R (ESR) 10 ohms to 100 ohms (mode and frequency dependent) Shunt Capacitance C0 2.5 pF - 4 pF typical (MIL-PRF-3098 CR101, CR102, CR103 types < 7 pF max.) Motional Capacitance C1 0.1 fF - 30 fF (mode and frequency dependent) Load Capacitance CL series to 32 pF (customer specified load) Drive Level DL 100 uW (50 uW to 5 mW) Aging per year after first 30 days < 0.5 ppm (better available) DOUBLY ROTATED (DR)-CUT VARIETIES (SC, MODIFIED SC, IT, ETC...) Performance Characterisitc Symbol Typical Performance Specifications Frequency Range FO 2.5 MHz to 140 MHz Turn Point TP +75oC to +105oC (mode, cut, frequency dependent, other turn points available) Frequency Calibration Tolerance Equivalent Series Resistance FR-FL +/- 1 ppm to +/- 5 ppm typical R (ESR) 15 ohms to 180 ohms (mode and frequency dependent) Shunt Capacitance C0 2.5 pF - 4 pF typical Motional Capacitance C1 0.1 fF - 30 fF (mode and frequency dependent) Load Capacitance CL series to 32 pF (customer specified load) Drive Level DL Aging per year after first 30 days PHASE NOISE @ 100 Hz OFFSET (dBc/Hz) Mode - Cut Fundamental-AT Fundamental-DR 3rd OT - AT 3rd OT - DR 5th OT - AT 5th OT - DR 7th OT - AT 100 uW (50 uW to 5 mW) < 0.5 ppb/day (mode-cut and frequency dependent, consult factory) Frequency Range Phase Noise 2.5 MHz - 20 MHz -80 to -120 5 MHz - 60 MHz 15 MHz - 100 MHz 25 MHz - 140 MHz -80 to -135 -120 to -150 -115 to -140 -115 to -140 TYPICAL ESR & C1 BY MODE AND FREQUENCY RANGE Mode Frequency Range (MHz) *ESR Typical (ohms) *C1 Typical (fF) Fund. 2.5 - 20 MHz 25-360 5 - 25 3rd 5 - 60 MHz 50-140 1 -2.5 th 15 - 100 MHz 50-120 0.70 7th 25 - 140 MHz <120 0.35 5 *ESR and C1 values are dependent upon the specified frequency and mode of vibration. -80 to -110 Phase Noise performance is mode and frequency dependent EQUIVALENT CIRCUIT OF A CRYSTAL RESONATOR NOMINAL G-SENSITIVITY (4 pt. blank mount) Cut G-SENSITIVITY AT 1 X 10-9 /g (average attainable when specified) DR (SC-IT) 5 x 10-10/g (average attainable when specified) Results assume same frequency and mode when specified. Better results are available. Vectron International designs and manufactures HC37 series crystals for a wide variety of commercial and high reliabilty applications. Our proven cleanroom finish processes and fully integrated environmental vacuum bake cold weld systems yield excellent aging and low perturbations. We have tight controls over series resistance, motional capacitance, temperature characteristics and other parameters critical to your application. We primarily build to customer specifications but we’ve optimized designs on all frequencies that are commonly used in telecommunications. Please feel free to contact us with your questions. We are here to assist you with selecting the best performing and most cost effective crystal for your application. Vectron International • 4914 Gray Road • Cincinnati, OH 45232 • Tel: 513-542-5555 • Tel: 1-88-VECTRON-1 • http://www.vectron.com PART NUMBER ORDERING INFORMATION A B CODE CODE XR X X C X E F G H J K CODE CODE CODE CODE CODE CODE CODE FREQUENCY X X X X X X X 000M000000 X PACKAGE ATTRIBUTES (see B details) CRYSTAL RESONATOR D ATTRIBUTE (TBD) MODE CALIBRATION TEMPERATURE LOAD CAPACITANCE (CL) OPERATING TEMPERATURE RANGE *Note: not all combination of options are available. Other specification parameters may be available (i.e., tighter tolderances/stabilities). Please consult the factory for your specific needs. OUTPUT FREQUENCY (MHZ) CALIBRATION TOLERANCE TEMPERATURE STABILITY PART NUMBER CODES (attribute details) B X X X X CODE PACKAGE TYPE CODE PACKAGE HEIGHT (A) CODE SEAL METHOD CODE U HC37 1 .265 (6.73) 1 CW 1 STANDARD 2 .250 (6.35) 2 SOLDER DIP 3 .230 (5.84) 4 .200 (5.08) 5 .155 (3.93) C E CODE MODE 1 Fund rd 3 3 5 5th OT A B C D E F G H LOAD CAPACITANCE Series 8 pF 10 pF 12 pF 15 pF 18 pF 20 pF 25 pF 30 pF J 32 pF K 35 pF M 40 pF N 45 pF P 50 pF R S A -55oC to +85oC B -55oC to +105oC 55 pF 60 pF T 65 pF U 70 pF V 75 pF W 80 pF Y 90 pF Z Custom o G CODE FREQUENCY STABILITY OVER TEMPERATURE A +/- 5 ppm OT D S OPERATING TEMPERATURE RANGE 7th OT 7 CODE CODE F B +/- 10 ppm o C -55 C to +125 C D -40oC to +70oC E -40oC to +85oC F -40oC to +105oC G -30oC to +80oC H -30oC to +85oC J -20oC to +70oC o +/- 12 ppm D +/- 15 ppm E +/- 20 ppm F +/- 25 ppm G +/- 30 ppm H +/- 32 ppm J +/- 40 ppm o K -10 C to +60 C M -10oC to +75oC N -5oC to +70oC P 0oC to +50oC R 0oC to +55oC S 0oC to +60oC T 0oC to +70oC o C K M N +/- 50 ppm +/- 60 ppm +/- 75 ppm P +/- 80 ppm R +/- 90 ppm S +/- 100 ppm T +/- 130 ppm o U 0 C to +85 C V +10oC to +40oC W -10oC to +70oC Y -55oC to +185oC Z -20oC to +180oC 1 0oC to +150oC 2 0oC to +200oC 9 Custom U +/- 150 ppm V +/- 200 ppm W +/- 250 ppm Y +/- 300 ppm Z Custom LEAD STYLE H J FREQUENCY CALIBRATION TOLERANCE CODE FREQUENCY CALIBRATION TEMPERATURE CODE TBD A +/- 5 ppm A +25oC A TBD B +/- 10 ppm B +50oC B TBD CODE o C +/- 12 ppm C +55 C C TBD D +/- 15 ppm D +60oC D TBD E +/- 20 ppm E +65oC E TBD F +/- 25 ppm F +70oC F TBD G +/- 30 ppm G +75oC G TBD H +/- 32 ppm H +80oC H TBD J +/- 40 ppm J +85oC J TBD o K +/- 50 ppm K +90 C K TBD M +/- 60 ppm M +95oC M TBD N +/- 75 ppm N +100oC N TBD P +/- 80 ppm P +105oC P TBD R +/- 90 ppm R +110oC R TBD S +/- 100 ppm S +115C S TBD T +/- 130 ppm T +120oC T TBD o U +/- 150 ppm U +125 C U TBD V +/- 200 ppm Z Custom Z Custom W +/- 250 ppm Y +/- 300 ppm Z Custom CALIBRATION TEMPERATURE IS ALWAYS +25oC UNLESS OTHERWISE SPECIFIED Vectron International • 4914 Gray Road • Cincinnati, OH 45232 • Tel: 513-542-5555 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Typical Environmental Specifications TEST DESCRIPTION SPECIFICATION REFERENCE SHOCK MIL-STD-202, Method 213, Cond. C (100g, 6ms, Half-Sine) VIBRATION MIL-STD-202, Method 201/204 (Random-Sine, 20g) TEMPERATURE CYCLE MIL-STD-883, Method 1010 (-55oC/+125oC), 10 cycles THERMAL SHOCK MIL-STD-202, Method 107 MOISTURE RESISTANCE MIL-STD-202, Method 106 SALT ATMOSPHERE MIL-STD-202, Method 101 ACCELERATION MIL-STD-883, Method 2001, Condition A (5,000g) SOLDERABILITY MIL-STD-202, Method 208 (ANSI-EIA-J-STD-002) TERMINAL STRENGTH MIL-STD-202, Method 211 (2lbs) PIND MIL-STD-883, Method 2020, Condition A or B (20g, 10g) FINE LEAK MIL-STD-202, Method 112, Condition C-IIIc (1x10-8 atm/cc2) GROSS LEAK MIL-STD-202, Method 112, Condition D RESISTANCE TO SOLVENTS MIL-STD-202, Method 215 RESISTANCE TO SOLDERING HEAT MIL-STD-202, Method 210, Condition K HIGH TEMPERATURE STORAGE MIL-STD-883, Method 1008, Condition C (+125oC, 168 hours) LOW TEMPERATURE STORAGE MIL-PRF-3098 Vectron is uniquely equipped to handle all of your special test requirements. All environmental and qualification related tests are performed in house. We’ve demonstrated compliance and the ability to test to the requirements of all governing industry and military crystal specifications (past and present). Some of which include; • MIL-PRF-3098 • MIL-C-49468 • MIL-C-3098 • TOR-2006 (8583)-5236 • EEE-INST-002 • MIL-PRF-55310 • MIL-STD-202 • MIL-STD-883 • 0THERS Additional Technical Information Diagrams of Series and Parallel Resonant Circuits Typical Wave Solder Reflow Profile (Sn-Pb) For Additional Information, Please Contact USA: Europe: Asia: Vectron International 4914 Gray Road Cincinnati, OH 45232 Tel: 1.513.542.5555 Fax: 1.513.542.5146 Tel: 1.888.328.7661 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 12/2009 Vectron International • 4914 Gray Road • Cincinnati, OH 45232 • Tel: 513-542-5555 • Tel: 1-88-VECTRON-1 • http://www.vectron.com