GBL401 thru GBL410 High Current Glass Passivated Molding Single-Phase Bridge Rectifier REVERSE VOLTAGE 100 TO 1000 VOLTS FORWARD CURRENT 4.0 AMPERE P b Lead(Pb)-Free Features: * Plastic Package has Underwriters Laboratory Flammability Classification 94V-0 * High current capacity with small package * Glass passivated chip junctions * Superior thermal conductivity * High IFSM GBL GBL Outline Dimension Unit:mm Dim A B C D E F G H I J K L WEITRON http://www.weitron.com.tw 1/3 Min 20.4 3x45˚ 1.80 0.90 4.80 10.2 17.37 1.37 3.20 0.80 0.80 0.30 Max 21.0 2.20 1.30 5.20 10.8 18.37 2.37 3.60 1.20 1.20 0.70 31-Jan-2011 GBL401 thru GBL410 MAXIMUM RATINGS (TA=25°C unless otherwise noted) Characteristics Symbol GBL401 GBL402 GBL404 GBL406 GBL408 GBL410 Unit Maximum Repetitive Voltage VRRM 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 100 200 400 600 800 1000 V Average Rectified Forward Current @Tc = 50°C 60Hz Sine Wave Resistance Load @Ta = 40°C IO 4 3 A Peak Forward Surge Current,8.3 ms Single Half Sine-Wave Superimposed on Rated Load IFSM 150 A Max instantaneous forward voltage at 2.0A VF 1.1 V Maximum DC Reverse Current @Ta = 25°C At Rated DC BlockingVoltage @Ta = 100°C IR 5 500 µA Rating Of Fusing (t<8.3ms) I2t 93 A2sec Dielectric Strength Terminals To Case, AC 1 Minute Current 1mA Vdia 2.5 KV Maximum Thermal On P.C.B. Without Heat-Sink RθJA 32 °C/W Resistance Per Leg On Al Plate Heat-Sink RθJC 8 °C/W TJ 150 °C Operating Junction Temperature Storage Temperature WEITRON http://www.weitron.com.tw TSTG -55 to +150 2/3 °C 31-Jan-2011 nstantaneous Reverse Current (µA) Average Rectified Forward Current Io(A) GBL401 thru GBL 410 Case Temperature Tc(• •) Percent of Rated Peak Reverse Voltage• • Fig.2• • Typical Reverse Characteristics Forward Current (A) Peak Surge Forward Current IFSM(A) Fig. 1 Derating Curve Forward Voltage VF Number of Cycles Fig.3• • Forward Voltage WEITRON http://www.weitron.com.tw Fig.4• • Peak Surge Forward Capability 3/3 31-Jan-2011