COILCRAFT DO3340P

Document 171-1
SMT Power Inductors – DO3340P Series
• Excellent current handling – up to 3.5 Arms with an 8 A
saturation current rating for a 10 µH part.
Designer’s Kit C310 contains 3 of each part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weight 1.8 – 2.8 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+105°C with derated current
Storage temperature Component: –40°C to +105°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 225 per 13″ reel Plastic tape: 24 mm wide,
0.4 mm thick, 24 mm pocket spacing, 11.4 mm pocket depth
PCB washing Only pure water or alcohol recommended
Part
number1
DO3340P-103ML_
DO3340P-153ML_
DO3340P-223ML_
DO3340P-333ML_
DO3340P-473ML_
DO3340P-683ML_
DO3340P-104ML_
DO3340P-154ML_
DO3340P-224ML_
DO3340P-334ML_
DO3340P-474ML_
DO3340P-684ML_
DO3340P-105ML_
L
DCR
±20%2
max
(µH)
(Ohms)
10
15
22
33
47
68
100
150
220
330
470
680
1000
0.040
0.050
0.066
0.080
0.110
0.17
0.22
0.34
0.44
0.70
0.95
1.15
2.0
SRF
typ
(MHz)
35
18
13
11
9.0
7.0
5.5
4.5
3.5
3.0
2.5
2.0
1.5
1. When ordering, please specify termination and packaging codes:
Isat3 Irms4
(A)
(A)
8.0
7.0
5.5
4.0
3.8
3.0
2.5
2.0
1.6
1.2
1.0
1.0
0.8
3.5
3.0
2.5
2.0
1.6
1.2
1.2
0.9
0.7
0.6
0.3
0.2
0.1
DO3316P-105MLD
Termination: L = RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (225 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP
4263B LCR meter or equivalent.
3. DC current at which inductance drops 10% (typ) from its value without
current.
4. Current that causes a 20°C temperature rise from 25°C ambient
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Document 171-1
Revised 010/14/08
Document 171-2
SMT Power Inductors – DO3340P Series
Typical L vs Frequency
Typical L vs Current
10000
10000
1000 µH
100 µH
100
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
10 µH
10
100 µH
100
10 µH
10
1
1
0.01
1
0.1
10
0.1
10
1
100
Current (A)
Frequency (MHz)
Irms Derating
0.510
max*
12,95
Internal code
Dash number
120
Start
90
80
0.333
typ
8,47
70
60
an additional 0.02/0,508
* Allow
in width and 0.01/0,254 in
0.450
max*
11,43
50
height for optional tin-lead and
tin-silver-copper application.
40
30
Finish
Part marking since Feb. 2005.
Parts manufactured prior to that
date may have color dots. Visit
www.coilcraft.com/colrpowr.cfm for details.
25°C
Percent of rated Irms
100
XXX
0.370
max
9,40
X
110
Recommended
Land Pattern
20
0.145
3,69
0.100
2,54
10
0.405
10,29
0.110
2,79
0
-40
-20
0
20
40
60
80
100
120
Ambient temperature (°C)
0.300
7,62
Dimensions are in
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
0.100
2,54
0.115
2,92
Document 171-2
Revised 10/14/08