COILCRAFT LPS5030

Document 581-1
Shielded Power Inductors–LPS5030 Series
• Very low DCR; excellent current handling
• 4.9 × 4.9 mm footprint; less than 3 mm tall
Designer’s Kit C420 contains 3 each of all values
Core material Ferrite
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 226 – 244 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
PCB washing Only pure water or alcohol recommended
DCR SRF
max3 typ4
±20% (µH) (Ohms) (MHz)
Inductance2
Part number1
LPS5030-901ML_
LPS5030-122ML_
LPS5030-172ML_
LPS5030-222ML_
LPS5030-332ML_
0.90
1.2
1.7
2.2
3.3
Isat (A)5
10% 20% 30%
drop drop drop
Irms (A)6
20°C 40°C
rise rise
0.040
0.043
0.051
0.057
0.066
250
210
190
168
125
3.8
3.5
3.0
2.9
2.3
4.0
3.6
3.2
3.1
2.5
4.1
3.7
3.3
3.2
2.6
2.10
2.00
1.90
1.60
1.40
2.80
2.65
2.50
2.15
1.80
LPS5030-472ML_
LPS5030-562ML_
LPS5030-682ML_
LPS5030-822ML_
LPS5030-103ML_
4.7
5.6
6.8
8.2
10.0
0.083
0.089
0.099
0.125
0.127
84
70
56
45
30
1.9
1.8
1.6
1.6
1.4
2.0
1.8
1.7
1.7
1.4
2.0
1.9
1.7
1.7
1.4
1.30
1.25
1.20
1.10
1.00
1.75
1.65
1.60
1.55
1.50
LPS5030-123ML_
LPS5030-153ML_
LPS5030-183ML_
LPS5030-223ML_
LPS5030-333ML_
12.0
15.0
18.0
22.0
33.0
0.155
0.160
0.170
0.190
0.260
24
32
27
24
19
1.3
0.80
0.80
0.70
0.60
1.4
0.90
0.82
0.75
0.63
1.4
0.90
0.87
0.78
0.64
0.95
0.92
0.90
0.88
0.85
1.40
1.40
1.30
1.25
1.20
LPS5030-473ML_
LPS5030-683ML_
LPS5030-823ML_
LPS5030-104ML_
LPS5030-124ML_
47.0
68.0
82.0
100
120
0.330
0.440
0.470
0.600
0.800
16
12
11
10
9
0.50
0.40
0.38
0.27
0.26
0.53
0.43
0.40
0.31
0.29
0.55
0.44
0.40
0.32
0.30
0.75
0.65
0.60
0.55
0.45
1.00
0.900
0.830
0.750
0.660
LPS5030-154ML_
LPS5030-224ML_
LPS5030-334ML_
LPS5030-474ML_
LPS5030-564ML_
150
220
330
470
560
0.860
1.35
1.80
2.80
3.20
7.5
6.0
5.0
4.0
3.6
0.22
0.21
0.155
0.117
0.110
0.25
0.235
0.155
0.134
0.130
0.263
0.245
0.200
0.146
0.140
0.42
0.36
0.32
0.28
0.23
0.570
0.500
0.420
0.370
0.320
LPS5030-684ML_
LPS5030-105ML_
LPS5030-155ML_
LPS5030-185ML_
LPS5030-225ML_
680
1000
1500
1800
2200
3.80
5.10
7.60
10.0
11.0
3.0
2.5
2.0
1.8
1.6
0.100
0.100
0.068
0.069
0.063
0.120
0.110
0.080
0.081
0.074
0.126
0.110
0.089
0.086
0.080
0.20
0.18
0.15
0.13
0.10
0.290
0.250
0.210
0.170
0.150
LPS5030-335ML_
LPS5030-475ML_
3300
4700
19.5
26.0
1.3
1.1
0.056 0.063 0.067 0.090 0.125
0.049 0.056 0.059 0.080 0.110
1. Please specify termination and packaging codes:
LPS5030-105MLC
Termination: L = RoHS compliant silver-palladiumplatinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (750 parts per
full reel).
B= Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter C
instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (2500 parts per full
reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using
an Agilent/HP 4263B LCR meter or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at which the inductance drops the specified
amount from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Document 581-1
Revised 10/06/08
Document 581-2
Shielded SMT Power Inductors – LPS5030 Series
Typical L vs Frequency
Typical L vs Current
10000
10000
3300 µH
3300 µH
1000 µH
330 µH
100 µH
100
33 µH
10 µH
10
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
330 µH
100 µH
100
33 µH
10 µH
10
3.3 µH
3.3 µH
1
1
0.01
1
0.1
10
0.01
1
0.1
Frequency (MHz)
10
Current (A)
Typical Current Derating
0.189 ±0.003*
4,80 ±0,076
0.189 ±0.003*
4,80 ±0,076
100
XXX X
90
80
Winding
direction
70
Dash
number
60
Internal
code
Recommended
Land Pattern
50
40
30
20
Isat
Irms
10
0
-40
-20
0
0.114 ±0.004
2,9 ±0,1
25°C
Percent of rated current
120
110
20
40
60
80
100
0.138
3,50
0.090
2,30
45°
typ
120 140
Ambient temperature (°C)
0.134
3,40
0.060
1,50
are of the case not
* Dimensions
including the termination. For maximum
overall dimensions including the
termination, add 0.005 in / 0,13 mm.
Dimensions are in
0.060
1,50
0.134
3,40
0.197
5,00
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
0.197
5,00
0.090
2,30
Document 581-2
Revised 10/06/08