Document 151-1 Common Mode EMI Filters - M2022 Series These common mode filters provide excellent noise attenuation in a compact, surface mount package. They’re built in an 1812 size configuration that’s ideal for auto insertion. In addition to the standard filter, a low profile (-ALPL) and shielded (-ASL) version are available. Features include excellent isolation, environmental stability and low cost. Coilcraft can also supply custom filters with special combinations of impedance, response and current handling. M2022-AL, M2022-ALPL B E 4 C D 1 Color dot over pin 1 A F H Part number1 M2022-AL_ M2022-ALPL_ M2022-ASL_ Inductance2 DCR max Irms3 (µH) (mOhm) (mAmp) 4.2 ±10% 800 500 4.0 ±10% 990 500 11.5 min 850 500 Isolation (Vrms) 500 500 500 G M2022-ASL B E 4 C D 1 1. When ordering, please specify packaging codes: M2022-ALPLC Packaging: C= 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel). 2. Inductance is per winding, measured at 10 MHz. 3. Current that causes a 30°C temperature rise from 25°C ambient. 4. Ambient temperature range: –40°C to +85°C with Irms current 5. Storage temperature range: Component: –40°C to +85°C Packaging: –40°C to +80°C 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 1 4 2 3 Pad Detail Recommended Land Pattern 1 0.020 0,51 0.020 0,51 2 0.015 ref 0,38 0.040 min 1,02 0.030 ±0.002 0,76 ±0,05 0.057 1,45 0.015 0,38 0.048 1,22 4 0.115 2,92 3 0.018 0,46 A F H G M2022-AL A max B max 0.195 0.150 4,95 3,81 C max 0.135 3,43 D ref 0.070 1,78 E ref 0.100 2,54 F ref G min H 0.178 0.04 0.03 4,52 1,02 0,76 M2022-ALPL A max B max 0.195 0.150 4,95 3,81 C max 0.079 2,01 D ref 0.070 1,78 E ref 0.100 2,54 F ref G min H 0.178 0.04 0.03 4,52 1,02 0,76 M2022-ASL A max B max 0.231 0.196 5,87 4,98 C max 0.150 3,81 D ref 0.107 2,72 E ref 0.100 2,54 F ref G min H 0.178 0.04 0.03 4,52 1,02 0,76 Weight: M2022-AL 155 mg; M2022-ALPL 85.5 mg; M2022-ASL 319 mg Terminations: Gold over nickel over moly-manganese. Tape and reel: 600/7″ reel; 2200/13″ reel 12 mm tape width For packaging data see Tape and Reel Specifications section. Specifications subject to change without notice. Please check our website for latest information. Document 151-1 © Coilcraft, Inc. 2009 Revised 10/30/08 Document 151-2 M2022-AL, M2022-ALPL Typical Attenuation* Typical Impedance vs Frequency 100 0 Impedance (kOhms) Attenuation (dB) Differential mode 10 20 30 10 1 0.1 0.01 Common mode 40 0.001 0.1 1 100 10 1 1000 10 100 1000 Frequency (MHz) Frequency (MHz) M2022-ASL Typical Attenuation* Typical Impedance vs Frequency 100 0 Impedance (kOhms) Attenuation (dB) Differential mode 10 20 30 10 1 0.1 0.01 Common mode 40 0.001 0.01 0.1 1 10 100 1000 10000 Frequency (MHz) 1 10 100 1000 Frequency (MHz) *Measured on Agilent/HP 8753D network analyzer. Ref: 50 Ohms. Specifications subject to change without notice. Please check our website for latest information. Document 151-2 © Coilcraft, Inc. 2009 Revised 10/30/08