True Sinewave Clock Oscillators and Voltage Controlled Crystal Oscillators Model CCO-083/085 (Clock Version) and CVXO-083/085 (VCXO Version) generate frequencies from 10Mhz to 200Mhz. This low current sinewave oscillator provides -150dBc/Hz noise floor while only consuming 8mA typical. Output level is 0dBm min. into 50 ohms, and harmonics are lower than -20dBc. The series has no sub-harmonics due to the use of Inverted Mesa (High Frequency Fundamental Crystal) technology. The oscillator is offered in extended operating temperature range (-40C to +85C), also available in 3.3V and 5V models . Applications include Low current applications and sources for driving PLL and Mixers. Rev.: F Date: 03-04-08 True Sinewave Clock Oscillators and Voltage Controlled Crystal Oscillators Frequency Range: 10Mhz to 200MHz Temperature Range: 0°C to +70°C (Option X) -40°C to +85°C Storage: -55°C to 90°C Input Voltage: (Option 3) 3.3V ± 0.3V (Option 5) 5.0V ± 0.5V Phase Noise Typ.: Input Current: 8mA Typ., 15mA Max @3.3V 12mA Typ., 20mA Max @5.0V 100Hz Output: True Sinewave 1KHz Load: 50 ohms 10KHz Power (std.): 0dBm Min. into 50 ohms 100KHz (Option B) +3dBm Min. into 50 ohms (Option C) +5dBm Min. into 50 ohms (Option D) +7dBm Min. into 50 ohms Harmonics: -20dBc Max Sub-Harmonics: None Enable/Disable: None Phase Noise Floor: -150dBc Typical Aging: <3ppm 1st/yr, <1ppm thereafter CCO-083/085 Options Temperature Range: 0°C to +70°C (±25ppm Max) -40°C to +85°C (±50ppm Max) CVXO-083/085 Frequency Pulling: ±50ppm APR Min. Control Voltage (083): 1.65V ± 1.65V (085): 2.5V ± 2.0V Settability (083): 1.65V ± 0.25V (085): 2.5V ± 0.5V Linearity: ±10% Max Part Number Example CCO-083X-100.000 = 3.3V, -40°C to +85°C (±25ppm), 100MHz CVXO-085XC-100.000 = 5.0V, -40°C to +85°C (±50ppmAPR), +5dBm, 100MHz -80dBc/Hz -112 dBc/Hz -140 dBc/Hz -150 dBc/Hz Pad 1 Connection NC or Volt. Cntrl. 7 GND 8 Output 14 Vdd Rev.: F Date: 03-04-08