DC/DC Converters CTDD1507M-D Series Fixed Input Isolated & Unregulated 1W Output, Dual Output Not shown at actual size. ctparts.com SPECIFICATIONS Part Number Vin Nom. CTDD1507M-0505D-1 CTDD1507M-0509D-1 CTDD1507M-0512D-1 CTDD1507M-0515D-1 5VDC 5VDC 5VDC 5VDC 4.5-5.5VDC 4.5-5.5VDC 4.5-5.5VDC 4.5-5.5VDC CTDD1507M-1205D-1 CTDD1507M-1209D-1 CTDD1507M-1212D-1 CTDD1507M-1215D-1 12VDC 12VDC 12VDC 12VDC 10.8-13.2VDC 10.8-13.2VDC 10.8-13.2VDC 10.8-13.2VDC Input Range Vout Iout Max. (mA) Iout Min. (mA) Effi(Typ.) ±5VDC ±9VDC ±12VDC ±15VDC ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 72% 75% 78% 78% ±5VDC ±9VDC ±12VDC ±15VDC ±100 ±56 ±42 ±33 ±10 ±6 ±5 ±4 74% 76% 79% 79% MAX Units ISOLATION SPECIFICATIONS Item Test Condition MIN Isolation Voltage Tested for 1 minute 1000 TYP VDC Isolation Resistance Test at 500VDC 1000 MΩ OUTPUT SPECIFICATIONS Item Test Condition MIN Output Power MAX Units 1 W 1.2 % Line regulation For Vin change of 1% Load regulation 10% to 100% load(5V output) 10 12 % 10% to 100% load(9V output) 6.5 8.0 % 10% to 100% load(12V output) 6.0 8.5 % 10% to 100% load(15V output) 6.0 7.0 % FEATURES Efficiency: To 79% Temperature Range: -40°C to 85°C Isolation: 1KVDC Package: UL94-V0 Miscellaneous: No heatsink required. No external components required. Industry standard pinout. Small footprint. High power density. Custom service available. Samples available. TYP 0.1 Output voltage accuracy See tolerance envelope graph Temperature drift 100% full load Output ripple 20MHz Bandwidth Switching frequency Full load, nominal input 100 0.03 %/°C 50 75 mVp-p 150 200 KHz Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. TYPICAL CHARACTERISTICS CHARACTERISTICS Temperature Derating Graph +10% +5% Nominal Voltage Typic a l Load Line +2.5% -2.5% -7.5% 10% 50% 100% Output Current(%) CENTRAL Technologies 02.18.05 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice Output Power(%) Tolerance Envelope Graph Output Voltage(%) Short Circuit Protection: 1 second Temperature Rise at Full Load: 25°C Max. 15°C Typ. Cooling: Free air convection Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -55°C to +125°C Lead Temperature: 300°C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Plastic (UL94-V0) MTBF: >1,000,000 hours 120 100 80 60 Safe Operating Area 40 20 0 -40 0 40 80 120 Ambient Temperature(°C) DC/DC Converters ctparts.com CTDD1507M-D Series Fixed Input Isolated & Unregulated 1W Output, Dual Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS 15.24 6.70 7.62 Detail A 11.2 Max. 7.50 Top View Front View 7.05 0.5 2.54 0.3 1.85Max. Detail A 0.50 4.13 6.00 6.25 2.54 Side View 5.00 0.25 1.50 1.20 Note: All pins on a 2.54mm pitch; all pin diameters are 0.50mm; all dimensions in mm PIN CONNECTIONS 10 9 Pin 1 2 3 4 5 8 7 6 Pin 6 7 8 9 10 Function GND Vin NC 0V -Vo 1 2 3 4 Function NC +Vo NC NC NC 5 CENTRAL Technologies 02.18.05 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice