TH97/10561QM ZPU100 - ZPU180 TW00/17276EM IATF 0060636 SGS TH07/1033 ZENER DIODES DO - 41 VZ : 100 to 180V PD : 1.3W 1.00 (25.4) MIN. 0.108 (2.74) 0.078 (1.99) FEATURES : * Glass passivated junction chip * For use in stabilizing and clipping circuits with higher power rating. * Other tolerances are available upon request. * Pb / RoHS Free 0.205 (5.20) 0.161 (4.10) 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) MECHANICAL DATA : * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.335 gram Dimensions in inches and ( millimeters ) Maximum Ratings and Thermal Characteristics Parameter (Rating at 25 °C ambient temperature unless otherwise specified.) Symbol Value Unit PD 1.3(1) W Zener Current see Table "Characteristics" Power Dissipation Thermal Resistance Junction to Ambient Air Junction temperature Storage temperature range RӨJA 130 (1) °C/W TJ 175 °C TSTG -55 to + 175 °C Note : (1) Valid provided that leads at a distance of 10mm from case are kept at ambient temperature. Electrical Characteristics (1) (Ratings at 25°C ambient temperature unless otherwise specified.) ZPU100 Min. (V) 88 Max. (V) 110 (mA) 5 Dynamic Resistance at IZT, f = 1kHz rzj (Ω) 140 (<300) ZPU120 107 134 5 170 (<330) >90 ZPU150 130 165 5 200 (<360) ZPU180 160 200 5 220 (<380) Zener Voltage VZ @ IZT Type No. Test Current IZT Reverse Voltage at IR = 0.5 μA VR (V) >75 Admissible Zener current (2) IZ (mA) 10 Temp. Coeff. of Zener Voltage at I ZT αVZ (10–4/°C) Min. +9 Max. +13 8.5 +9 +13 >112 7 +9 +13 >134 5.5 +9 +13 Notes : (1) Tested with pulses tp = 5 ms (2) Valid provided that electrodes are kept at ambient temperature Page 1 of 1 Rev. 04 : June 11, 2008