PRODUCT BRIEFS | MARCH 2006 MTX9516 and MRX9516 12 Channel Parallel Optical TX and RX Modules, 3.3 Gbps per Channel The MTX9516 and MRX9516 are cost-effective high-speed transmitter (TX) and receiver (RX) modules for use as parallel optical data communication links. The modules perform logic-tolight and light-to-logic conversions for data transmission over multi-mode fiber ribbon cable, at a wavelength of 850 nm. Applications Optical backplanes Ganged serial links Very Short Reach SONET The transmitter module uses a 1x12 oxide-confined VCSEL array. The receiver uses a high-speed photodiode array. Logic-logic data links Board-to-board and shelf-to-shelf For optical cable connections, both modules use industry standard IEC 1754-7 MPO connector receptacles. For electrical connections, both modules use widely accepted 100 pin matrixarray connectors. Features Single +3.3V power supply Power Consumption 1.3 Watts typ. 100-pin matrix array electrical connector MPO Optical connector CML data path inputs and outputs, with support for both AC and DC coupled IO Zero to 80 ºC case temperature range Compliance SNAP12 MSA compliant Eye safety: Class 1M laser product per EN609825-1 and FDA/CDRH Electromagnetic Emissions: FCC part 15 - Class B (Residential), EN55022 (Formerly CISPR 22) Electromagnetic Immunity: EN61000-4-3, GR-1089-CORE Section 3.3 For more information on this and other products contact Sales at EMCORE 505-559-2600, or visit www.emcore.com. Copyright EMCORE — EMCORE Confidential MTX9516 and MRX9516 PRODUCT BRIEFS |MARCH 2006 12 Channel Parallel Optical TX and RX Modules Mechanical Interface Package Dimensions A common package format is used for both the MTX9516 transmitter and MRX9516 receiver modules; see image on cover page. The only difference between the modules is the position of the electrical receptacle relative to the mounting feet. MODULE DIMENSIONS Key A1 B1 C1 D1 E1 F1 G1 H1 J1 K1 L1 M1 N1 P1 R1 S1 T1 U1 V1 W1 X1 Y1 Z1 AE1 AF1 AH1 Value mm 35.37 16.75 14.50 3.10 12.12 7.43 12.50 4.44 0.381 0.76 31.75 30.23 13.72 1.14 19.43 ∅3.80 THREAD 16.89 ∅1.30 ∅2.50 28.42 7.80 41.00 8.38 2.30 7.50 Tolerance mm ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 ±0.12 ±0.12 ±0.50 ±0.12 ±0.12 ±0.12 ±0.12 ±0.25 — ±0.12 ±0.12 ±0.25 ±0.5 ±0.5 ±0.5 ±0.25 ±0.01 ±0.1 MODULE DIMENSIONS Tolerancing per ASME Y14.5M-1994. All dimensions are in mm. Product Disclaimer EMCORE reserves the right to alter product specifications, features, capabilities, and functions or to discontinue products at any time without notice Copyright © 2006 EMCORE Corporation MTX9516 and MRX9516 PRODUCT BRIEFS |MARCH 2006 12 Channel Parallel Optical TX and RX Modules Ordering Information MTX9516-FB 12 Channel Parallel Optical TX Module – 3.3 Gbps per Channel – with Flat Base for customer-provided heat sink MRX9516-FB 12 Channel Parallel Optical RX Module – 3.3 Gbps per Channel – with Flat Base for customer-provided heat sink Contact Information For more information on this application note, related application notes or related products please contact: Sales - EMCORE Fiber Optics Division [email protected] EMCORE Corporation 1600 Eubank Blvd. SE Albuquerque, New Mexico 87123 Tel: (505) 559-2600 Fax: (505) 323-3430 Product Disclaimer EMCORE reserves the right to alter product specifications, features, capabilities, and functions or to discontinue products at any time without notice Copyright © 2006 EMCORE Corporation