EPCOS B82141A1473J000

Inductors
RF chokes, SBC series
Series/Type:
B82141A, B82141B
Date:
March 2008
Data Sheet
 EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
RF chokes
B82141A, B82141B
SBC series, 3.0 × 6.8 (mm)
SBC choke (Small Bobbin Core)
Rated inductance 1 µH to 1000 µH
Rated current 55 mA to 725 mA
Construction
■ Mini ferrite drum core
■ Winding: enamel copper wire
■ Flame-retardant lacquer coating
B82141A
Features
■
■
■
■
Small size
Relatively high rated current
Suitable for wave soldering
RoHS-compatible
Applications
■ RF blocking and filtering
■ Decoupling and interference suppression
■ For electronic household appliances,
B82141B
automotive and entertainment electronics
Terminals
■
■
■
■
Central axial leads (B82141A)
Radially bent to 5 mm lead spacing (B82141B)
Base material CuAg0.1
Hot-dipped with pure tin
Marking
Inductance indicated by color bands to IEC 60062
Delivery mode and packing units
■ Taped, Ammo and reel packing
■ Packing units:
Ammo
(pcs./pack.)
Reel
(pcs./reel)
Axial
5000
5000
Radial
2500
2000
Please read Cautions and warnings and
Important notes at the end of this document.
2
03/08
RF chokes
B82141A, B82141B
SBC series, 3.0 × 6.8 (mm)
Dimensional drawings
B82141A (axial leads, taped)
Dimensions in mm
6.8 max.
(IEC 60294)
3.5 min.
6±0.5
5±0.25 5±0.25
ø3 max.
ø0.6 max.
65±1
53±2
9.8 max.
lacquered
Minimum lead spacing 10 mm
IND0428-3-E
1.3 max.
2 max.
1.3 max.
insulated
Thickness of tape
0.7±0.2
_ 0.5
9 +0.75
6 min.
_ 0.5
18 +1
0.5 max.
9.8 max.
lacquered
0.6 max.
16±0.5
2 max.
29 max.
ø3 max.
6.8 max.
(IEC 60294)
B82141B (central radial leads, taped)
_ 0.1
5 +0.6
3.8±0.7
IND0629-B
4±0.2
12.7±0.3
IND0632-V-E
n
w
30
H
30
ø360 _ 1
ø30.5±0.15
ø82+1
ø90
Packing
Label
L
30
W
IND0452-V-E
L × W × H (max. mm):
Axial: 310 × 75 × 120, radial: 340 × 50 × 210
n (mm): Axial 72 +1, radial 42 +1
w (mm): Axial 84 max., radial 54 max.
Please read Cautions and warnings and
Important notes at the end of this document.
IND0631-B-E
3
03/08
RF chokes
B82141A, B82141B
SBC series, 3.0 × 6.8 (mm)
Technical data and measuring conditions
Rated inductance LR
Measured with LCR meter Agilent 4284A
or impedance analyzer Agilent 4294A
= 1 MHz
Measuring frequency:
LR ≤ 10 µH
10 µH < LR ≤ 4700 µH = 100 kHz
Measuring current:
≤ 1 mA
Measuring temperature: 20 °C
Q factor Qmin
Measured with precision impedance analyzer Agilent 4294A, 20 °C
Rated temperature TR
40 °C
Rated current IR
Maximum permissible DC current at rated temperature
Inductance decrease ∆L/L0
≤ 10% (referred to initial value) at IR, 20 °C
DC resistance Rmax
Measured at 20 °C
Resonance frequency fres,min Measured with Agilent 4294A or 8753ES, 20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (3 ±0.3) s
Wetting of soldering area ≥ 90%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(260 ±5) °C, 10 s (to IEC 60068-2-20, test Tb)
Tensile strength of leads
≥ 20 N (to IEC 60068-2-21, test Ua)
Climatic category
55/125/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +125 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Weight
Approx. 0.22 g
Mounting information
When bending the leads, take care that the start-of-winding areas at the face ends (protected by
glue and lacquer) are not subjected to any mechanical stress.
Please read Cautions and warnings and
Important notes at the end of this document.
4
03/08
RF chokes
B82141A, B82141B
SBC series, 3.0 × 6.8 (mm)
Characteristics and ordering codes
fQ
IR
Rmax
fres, min
MHz
mA
Ω
MHz
Ordering code 2)
(reel packing) 3)
40
7.96
725
0.19
180
B82141+1102K000
1.2
40
7.96
700
0.20
160
B82141+1122K000
1.5
40
7.96
670
0.22
155
B82141+1152K000
1.8
45
7.96
660
0.23
145
B82141+1182K000
2.2
45
7.96
630
0.25
130
B82141+1222K000
2.7
45
7.96
610
0.27
110
B82141+1272K000
3.3
50
7.96
580
0.30
90
B82141+1332K000
3.9
50
7.96
560
0.32
70
B82141+1392K000
4.7
50
7.96
530
0.36
60
B82141+1472K000
5.6
50
7.96
510
0.38
50
B82141+1562K000
6.8
50
7.96
480
0.43
40
B82141+1682K000
8.2
50
7.96
450
0.52
30
B82141+1822K000
10
55
2.52
410
0.60
25
B82141+1103K000
12
55
2.52
385
0.67
20
B82141+1123K000
15
55
2.52
365
0.74
17
B82141+1153K000
18
55
2.52
350
0.81
14
B82141+1183K000
22
55
2.52
335
0.90
12
B82141+1223K000
27
55
2.52
315
1.00
11
B82141+1273K000
33
55
2.52
300
1.12
10
B82141+1333K000
39
55
2.52
285
1.21
LR
Tolerance1)
Qmin
µH
1.0
±10%
^
K
1) Closer tolerances on request.
2) Replace the + by code letter »A« for axial taping or by »B« for radial taping.
3) For Ammo pack the last digit has to be a »9«. Example: B82141A1102K009
Please read Cautions and warnings and
Important notes at the end of this document.
5
03/08
8.5
B82141+1393K000
RF chokes
B82141A, B82141B
SBC series, 3.0 × 6.8 (mm)
Characteristics and ordering codes
Tolerance1)
fQ
IR
Rmax
fres, min
MHz
mA
Ω
MHz
Ordering code 2)
(reel packing)3)
55
2.52
200
2.40
7.7
B82141+1473J000
56
55
2.52
195
2.60
6.8
B82141+1563J000
68
55
2.52
185
2.90
5.7
B82141+1683J000
82
55
2.52
175
3.20
5.5
B82141+1823J000
100
60
0.796
170
3.50
5.3
B82141+1104J000
120
60
0.796
160
3.80
5.0
B82141+1124J000
150
60
0.796
150
4.30
4.6
B82141+1154J000
180
60
0.796
135
5.30
4.2
B82141+1184J000
220
60
0.796
130
5.80
3.8
B82141+1224J000
270
60
0.796
115
7.80
3.2
B82141+1274J000
330
60
0.796
105
9.10
3.0
B82141+1334J000
390
60
0.796
95
11.0
2.7
B82141+1394J000
470
60
0.796
90
12.0
2.3
B82141+1474J000
560
60
0.796
75
16.5
2.2
B82141+1564J000
680
60
0.796
65
22.0
2.0
B82141+1684J000
820
60
0.796
60
25.0
1.8
B82141+1824J000
1000
60
0.796
55
33.0
1.5
B82141+1105J000
LR
Qmin
µH
47
±5%
^
J
1) Closer tolerances on request.
2) Replace the + by code letter »A« for axial taping or by »B« for radial taping.
3) For Ammo pack the last digit has to be a »9«. Example: B82141B1473J009
Please read Cautions and warnings and
Important notes at the end of this document.
6
03/08
RF chokes
B82141A, B82141B
SBC series, 3.0 × 6.8 (mm)
Impedance |Z| versus frequency f
measured with impedance analyzer Agilent
4294A or S-parameter network analyzer
Agilent 8753ES, typical values at 20 °C
IND0117-5
10 6
IND0118-7
10 4
B82141A/B
Ω
| Z|
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4284A,
typical values at 20 °C
B82141A/B
µH
L
10 5
1000 µH
10 3
10 4
100 µH
10 2
10 3
10 µH
10 1
1 µH
10 µH
100 µH
1000 µH
10 2
10 1
10 0 6
10
10 7
10 8
10
Hz 10 9
f
_1
10
_2
10
_1
10 0
A 10 1
I DC
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = 40 °C)
Q factor versus frequency f
measured with impedance analyzer
Agilent 4294A, typical values at 20 °C
IND0119-9
100
1 µH
10 0
IND0552-S-E
1.2
B82141A/B
Iop
IR
Q
1000 µH
100 µH
10 µH
1 µH
1.0
0.8
0.6
50
0.4
0.2
0
10 4
10 5
10 6
10 7
0
Hz 10 8
f
0
20
40
60
80
100
˚C
TA
7
03/08
140
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
8
03/08
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
9
03/09