Surge Arrester 3-Electrode-Arrester T60-A260X Ordering code: B88069X5230C203 DC spark-over voltage 1) 2) 4) 260 ± 20 V % < 600 < 550 V V < 650 < 600 V V Nominal impulse discharge current (wave 8/20 µs) 5) Single impulse discharge current (wave 8/20 µs) 5) 20 30 kA kA Nominal alternating discharge current (50 Hz, 1 s) 5) Alternating discharge current (50 Hz, 9 cycles) 5) 20 130 A A Insulation resistance at 100 Vdc 4) > 10 GΩ 4) < 1.5 pF Transverse delay time 3) < 0.2 µs Arc voltage at 1 A Glow to arc transition current Glow voltage ~ 30 ~1 ~ 200 V A V Weight ~3 g Operation and storage temperature -40 ... +90 °C Climatic category (IEC 60068-1) 40/ 90/ 21 Impulse spark-over voltage 4) at 100 V/µs - for 99 % of measured values - typical values of distribution at 1 kV/µs Capacitance at 1 MHz - for 99 % of measured values - typical values of distribution Marking, blue 260 YY M O 260 YY M O - Nominal voltage - Year of production - Month of production (1 ... 9 = Jan ... Sep; O ... D = Oct ... Dec) - Non radioactive 1) At delivery AQL 0.65 level II, DIN ISO 2859 In ionized mode 3) Test according to ITU-T Rec. K.12 4) Tip or ring electrode to center electrode 5) Total current through center electrode, half value through tip respectively ring electrode. Terms in accordance with ITU-T Rec. K.12 and DIN 57845/VDE0845 2) AB E / AB PM Issue 05, 23.05.2002 Page 1 of 2 Surge Arrester 3-Electrode-Arrester T60-A260X Ordering code: B88069X5230C203 Not to scale Dimensions in mm Non controlled document EPCOS AG 2002. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. AB E / AB PM Issue 05, 23.05.2002 Page 2 of 2