IPT SE Series Bayonet Lock Connectors IPT 02 PP Rear Box Mount Square Flange Receptacle Through Bulkhead IPT 02 PP 18-11 P/S Z XX MIL-C-26482 Series l Type Mod Code Options See Table II 02 - Rear Box Mount Square Flange Receptacle Alternate Insert Rotation (W, X, Y, Z) Omit for Normal PP - Thru-Bulkhead Solid Contact Gender P/P - Pin/Pin S/S - Socket/Socket P/S - Pin/Socket Shell Size and Insert Arrangements D2 L3 L2 Socket Side E Pin Side L4 B L1 APPLICATION NOTES 1. Through bulkhead receptacle with solid feedthrough contacts. Rear box mount square flange version. 2. Threaded mount holes. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-30 www.glenair.com IPT SE Series Bayonet Lock Connectors IPT 02 PP Rear Box Mount Square Flange Receptacle Through Bulkhead TABLE I: DIMENSIONS Shell size B Max. D2 Min. E ± 0.15 L1 Max. L2 + 0.79 -0 L3 ± 0.4 L4 Max. Maximum Weight in Grams 8 21.03 2.9 15.08 29 14.27 1.57 5.54 10 10 24.23 2.9 18.26 29 14.27 1.57 5.54 11 12 26.59 2.9 20.62 29 14.27 1.57 5.54 14 14 28.98 2.9 23.01 29 14.27 1.57 5.54 16 16 31.34 2.9 24.61 29 14.27 1.57 5.54 18 18 33.73 2.9 26.97 29 14.27 1.57 5.54 21 20 36.90 2.9 29.36 36 17.47 2.39 8.74 25 22 40.08 2.9 31.75 36 17.47 2.39 8.74 29 24 43.25 3.6 34.92 36 17.47 2.39 7.90 31 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive G3 Cadmium with Olive F8 Zinc Cobalt with Drab Passivation Olive Drab Passivation Thermal Shock -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C Salt Spray After Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour Electical Conductivity Very Good NO Very Good Very Good Good Abrasion Resistance Very Good Very Good Good Very Good Good © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-31 www.glenair.com