TaNSil® Integrated Audio Passive Network QS013 Series • RoHS compliant or Sn/Pb terminations available • Less than -90dB channel to channel crosstalk • Contains all AC97 signal conditioning components • Single 28-pin QSOP package saves board space and assembly cost Electrical Data Absolute Tolerance Ratio Tolerance Absolute TCR Package Power Rating Channel to Channel Crosstalk Inter-Channel Crosstalk ±5% to ±1% ±100ppm/°C 1.00 Watts <-90dB @ 1KHz <-90dB @ 1KHz Environmental Data (∆R%) Test per MIL-PRF-83401 Characteristic H Limits IRC Maximum IRC Typical Thermal Shock ±0.5 ±0.1 ±0.02 Power Conditioning ±0.5 ±0.2 ±0.05 Low Temperature Operation ±0.1 ±0.1 ±0.03 Short Time Overload ±0.1 ±0.1 ±0.03 Terminal Strength ±0.25 ±0.1 ±0.02 Resistance to Soldering Heat ±0.1 ±0.1 ±0.05 Moisture Resistance ±0.4 ±0.2 ±0.05 Shock ±0.25 ±0.1 ±0.02 Vibration ±0.25 ±0.1 ±0.02 Life ±0.5 ±0.1 ±0.10 High Temperature Exposure ±0.2 ±0.1 ±0.05 Low Temperature Storage ±0.1 ±0.1 ±0.03 25°C Double Load ±0.5 ±0.1 ±0.10 General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc QS013 Series Issue February 2009 Sheet 1 of 4 TaNSil® Integrated Audio Passive Network Schematic Data R20 4.7K 28 R24 33K 27 R23 22K 26 25 R22 33K 24 23 R21 22K 22 R19 33K 21 20 R18 4.7K 19 18 17 16 15 GND R17 100K R5 510 R7 6.8K R9 3.4K R1 6.8K 1 2 R3 6.8K R11 6.8K R13 6.8K 3 4 R4 6.8K 5 R2 6.8K 6 GND 7 R6 100 GND 8 9 R8 6.8K 10 R10 3.4K 12 11 R12 6.8K R14 6.8K R15 6.8K 13 14 R16 6.8K Resistor Value (Ω) Pins Ratio Tolerance Ratio Ref Resistor Trk TCR (ppm/°C) Resistor Value (Ω) Pins Ratio Tolerance Ratio Ref Resistor Trk TCR (ppm/°C) 1 6.8k 1, 4 - - - 13 6.8k 11, 14 - - - 2 6.8k 4, GND - - - 14 6.8k 11, GND - - - 3 6.8k 2, 3 to ±1 1 ±10 15 6.8k 12, 13 to ±1 13 ±10 4 6.8k 3, GND to ±1 2 ±10 16 6.8k 12, GND to ±1 14 ±10 5 510 6, 18 - - - 17 100k 18, 19 - - - 6 100 6, GND - - - 18 4.7k 19, GND - - - 7 6.8k 8, 17 - - - 19 33k 20, GND - - - 8 6.8k 8, GND - - - 20 4.7k 21, GND - - - 9 3.4k 9, 16 - - - 21 22k 23, 24 - - - 10 3.4k 9, GND - - - 22 33k 25, 24 - - - 11 6.8k 10, 15 to ±1 7 ±10 23 22k 26, 27 to ±1 21 ±10 12 6.8k 10, GND to ±1 8 ±10 24 33k 28, 27 to ±1 22 ±10 © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com QS013 Series Issue February 2009 Sheet 2 of 4 TaNSil® Integrated Audio Passive Network Application Data Line In Left 1 R1 4 Codec Line Left 6.8k R2 IRC QS013 Integrated Audio Passive Network Application Diagram 6.8k 5, 7, 22 Line In Right 2 R3 3 Codec Line Right 6.8k R4 6.8k 5, 7, 22 Aux In Left 13 R15 12 Codec Aux Left 6.8k R16 33k 6.8k Codec Line Out Right 5, 7, 22 Aux In Right 14 R13 11 27 R24 28 22k 6.8k 15 R11 Audio Codec 10 Codec CD Left 6.8k 33k R12 6.8k Codec Line Out Left 5, 7, 22 17 R7 8 23 R21 24 R22 25 22k Codec CD Right 6.8k R8 6.8k 5, 7, 22 CD Gnd 16 R9 9 Codec CD Gnd 3.4k R10 3.4k 5, 7, 22 Italic = QS013 element R18 4.7k 19 5, 7, 22 Mic In 21 R20 4.7k 5, 7, 22 Amp Out Right Codec Aux Right 5, 7, 22 CD In Right R23 6.8k R14 CD In Left 26 R17 18 100k 20 R19 33k R5 510 Codec Mic Left Codec Mic Right 6 R6 100 5, 7, 22 © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com Pin Number Pin Label 1 Line in Left 2 Line in Right 3 Codec Line Right 4 Codec Line Left 5 GND 6 Codec Mic In 7 GND 8 Codec CD Right 9 Codec CD GND 10 Codec CD Left 11 Codec Aux Right 12 Codec Aux Left 13 Aux In Left 14 Aux In Right 15 CD In Left 16 CD GND 17 CD In Right 18 MIC_AMP_OUT 19 MIC- 20 MIC+ 21 MIC In 22 GND 23 Codec Line Out Left 24 Amp Left Input 25 Amp Out Left 26 Codec Line Out Right 27 Amp Right Input 28 Amp Out Right Amp Out Left QS013 Series Issue February 2009 Sheet 3 of 4 N TaNSil® Integrated Audio Passive Network 0.154" -.003" 0.236" -.008" Physical Data N 1 0.025″ Typ L 0.154" -.003" 0.236" -.008" 0.064" -.003" 0.010″ -.002″ 0.006" -.002" 1 N (# of Leads) L (±.004) 28 0.389 0.025″ Typ L 0.064" -.003" Ordering Data IRC Part Number 0.010″ -.002″ Absolute Tolerance Ratio Tolerance* ±5% ±2% ±5% ±1% 0.006" -.002" GUS-QS013LF GUS-QS013 GUS-QS013ALF GUS-QS013A *Notes: Reference Resistor Details Table for element matching references. LF indicates RoHS compliant, 100% matte tin, Pb-free terminations. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com QS013 Series Issue February 2009 Sheet 4 of 4