KOA SPEER ELECTRONICS, INC. SS-226 R3 W Frequency Ceramic Capacitor NEHigh AHA 8/12/04 CERTIFIED HFC Series 1. Features ■ ■ ■ ■ ■ ■ ■ Suitable for surface mounting. (Chip type) Low dielectric loss at high frequency. ( High Q) Narrow tolerance of capacitance Excellent temperature characteristics High reliability and no polarity by single layer ceramic substrate construction 0.10 ~ 1.10 pF available by 0.05 pF range (HFC1005 series) 0.10 ~ 1.20 pF available by 0.05 pF range (HFC1410, 1608, 1610, 1612 series) 2. Applications ■ ■ Microwave circuit ■ Mobile phone headset Others 3. Type Designation Type designation shall be as the following form. HFC 1608 C T TD R10 Type Size Material Code Termination Material Packaging Nominal Capacitance 1005: 1.0 x 0.5 mm 1410: 1.4 x 1.0 mm 1608: 1.6 x 0.8 mm 1610: 1.6 x 1.0 mm 1612: 1.6 x 1.2 mm B C G H K N S T V T= 100% Tin TD: Paper Tape (1005 only-10,000 pcs/reel) TE: Embossed Taping 1410: 3,000 pcs/reel 1608: 4,000 pcs/reel 1610: 3,000 pcs/reel 1612: 3,000 pcs/reel 2 Significant digits + zeros with R as decimal 4. Dimensions Table 1 L Dimensions - inches (mm) L W Part T 1005 0.039±0.006 (1.00±0.15) 0.020±0.004 (0.50±0.10) 0.020±0.004 (0.50±0.10) 1410 0.055±0.006 (1.40±0.15) 0.039±0.004 (1.00±0.10) 0.039±0.004 (1.00±0.10) Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 W ■ USA ■ 814-362-5536 T PAGE 1 OF 9 ■ Fax 814-362-8883 ■ www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 Table 1 4. Dimensions Cont. L Part W Dimensions - inches (mm) L W T 1608 0.063±0.006 (1.60±0.15) 0.031±0.004 (0.80±0.10) 0.028±0.008 (0.70±0.20) 1610 0.063±0.006 (1.60±0.15) 0.039±0.004 (1.00±0.10) 0.033±0.01 (0.85±0.25) 1612 0.063±0.006 (1.60±0.15) 0.047±0.004 (1.20±0.10) 0.043±0.008 (1.10±0.20) T 5. Characteristics of Dielectric Materials Table 2 - HFC1410, 1608, 1610, 1612 Series Table 2 - HFC1005 Series Material Code ε 0±10 C 21.5±2.0 0±10 70.0±3.0 6±10 T 37.0±1.5 0±10 K 92.0±2.0 6±10 N 70.0±3.0 6±10 V 113.0±5.0 30±10 V 113.0±5.0 30±10 H 140.0±3.0 0±30 G 160.0±4.0 0±30 S 180.0±4.0 0±30 B 200.0±5.0 0±30 Material Code ε τ T 37.0±1.5 N r f (ppm/°C) τ r f (ppm/°C) 6. Standard Specifications Ordering Code Capacitance (pF) HFC1005TTR10 0.10 HFC1005TTR15 0.15 HFC1005NTR20 0.20 HFC1005NTR25 0.25 HFC1005KTR30 0.30 Tolerance Code (pF) Material Code ±0.015 T Operating Temp. Range -55°C to 50 N ±0.030 Rated Voltage DC(V) 125°C K PAGE 2 OF 9 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 6. Standard Specifications Cont. Tolerance Code (pF) Material Code Ordering Code Capacitance (pF) HFC1005KTR35 0.35 HFC1005VTR40 0.40 HFC1005VTR45 0.45 HFC1005VTR50 0.50 HFC1005VTR55 0.55 HFC1005VTR60 0.60 HFC1005HTR65 0.65 HFC1005HTR70 0.70 HFC1005HTR75 0.75 HFC1005GTR80 0.80 HFC1005GTR85 0.85 HFC1005GTR90 0.90 HFC1005GTR95 0.95 HFC1005ST1R0 1.00 S HFC1005BT1R1 1.10 B HFC1410VT1R1 1.10 HFC1410VT1R2 1.20 HFC1410VT1R3 1.30 HFC1608CTR10 0.10 HFC1608TTR15 0.15 HFC1608NTR20 0.20 HFC1608NTR25 0.25 HFC1608NTR30 0.30 HFC1608NTR35 0.35 HFC1608VTR40 0.40 HFC1608VTR45 0.45 HFC1608VTR50 0.50 HFC1608VTR55 0.55 Operating Temp. Range Rated Voltage DC(V) K V ±0.03 -55°C 50 H to 125°C G ±0.05 V ±0.075 -55°C to 125°C 50 C ±0.015 T -55°C N to 50 ±0.03 125°C V PAGE 3 OF 9 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 6. Standard Specifications Cont. Ordering Code Capacitance (pF) HFC1610VTR60 0.60 HFC1610VTR65 0.65 HFC1610VTR70 0.70 HFC1610VTR75 0.75 HFC1610VTR80 0.80 HFC1610VTR85 0.85 HFC1610VTR90 0.90 HFC1612VTR95 0.95 HFC1612VT1R0 1.00 Tolerance Code (pF) Rated Voltage DC(V) Material Code Operating Temp. Range ±0.03 -55°C to 50 V ±0.05 125°C ±0.05 V -55°C to 125°C 50 8. Self Resonant Frequency (SRF) vs. Capacitance Value HFC1410, 1608, 1610, 1612, series Type: HFC1612VT1R0R05M50 (1.0 pF) Q vs. Frequency Self Resonant Frequency (GHz) 100 ESR vs. Frequency 5 10,000 1000 1 10 100 0.1 10 1 0.1 1 10 1 500 1000 Capacitance (pF) 1800 0.01 500 Frequency (MHz) 1000 1800 Frequency (MHz) PAGE 4 OF 9 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 9. Characteristics 9-1 Electrical Characteristics Item Requirement Conditions Capacitance Within the specified tolerances of parts Frequency: 1 MHz Voltage: 1 Vrms Instrument: YHP4278A Q Value 100 or more Frequency: 1 MHz Voltage: 1 Vrms Instrument: YHP4278A Insulation Resistance 10,000 MΩ or more Test Voltage: Rated Voltage Electrification Time: 60 ± 5 sec Breakdown Voltage No break down Test Voltage: 300% of the Rated Voltage Electrification Time: 1 to 5 sec Limit Surge Current: 50 mA or less 9-2 Mechanical Characteristics Item Requirement Conditions Adhesion of Electrodes No mechanical damage A static load of 5N(0.5 kgf) shall be applied in the direction of the arrow as follows Printed Board Chip Load (5N) Core Body Strength No mechanical damage A static load of 5N(0.5 kgf) using a R 0.5 pressure rod shall be applied on the core of the component and held for 10 sec Substrate Bending Test Visual Examination: No mechanical damage Capacitance: Within ± 2.0% or ± 0.02 pF whichever is more Q Value: 100 or more Insulation Resistance: 10,000 MΩ or more Solder a specimen to the substrate and bend it. (Displacement: 2mm) 20 Substrate Weight Displacement 45 ± 2 45 ± 2 PAGE 5 OF 9 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 9-3 Endurance Characteristics Item Requirement Conditions Solderability A new coating of solder shall cover a minimum of 95% of the surface being immersed Flux: 25 wt% colophony Solder: H60A (Silver 3%) Preheating: 150°C for 1 min Soldering Temperature: 230 ± 5°C Soldering Temperature: 215 ± 5°C (MC1005) Immersion Time: 3 ± 1 sec Resistance to Soldering Heat Flax: 25 wt% colophony Solder: H60A (Silver 3%) Soldering Temperature: 270 ± 5°C Immersion Time: 10 ± 1 sec Resistance to Humidity (Load Test) Temperature: 60 ± 2°C Relative Humidity: 95% RH Test Voltage: Rated Voltage Test Hours: 1000 -0/+48 hours Visual Examination: No mechanical damage Capacitance: Within ± 2.0% or ± 0.02 pF whichever is more Q Value: 100 or more Insulation Resistance: 10,000 MΩ or more Resistance to Humidity (Unload Test) Temperature: 85 ± 2°C Relative Humidity: 85% RH Test Hours: 1000 -0/+48 hours Resistance to High Temperature Temperature: 125 ± 2°C Test Voltage: Rated Voltage Test Hours: 1000 -0/+48 hours Resistance to Low Heat Temperature: -55 ± 2°C Test Hours: 1000 -0/+48 hours Temperature Cycle Temperature: -55°C 30 min 125°C 30 min Hours for 1 Cycle: 2 hours Temperature Cycle: 50 cycles or more Visual Examination: No mechanical damage Capacitance: Within ± 2.0% or ± 0.02 pF whichever is more Q Value: 100 or more Insulation Resistance: 10,000 MΩ or more Vibration Shock Frequency of Vibration: 10 to 100 Hz Sweeping: 10→100→10Hz 5 min 5.0 G This motion shall be applied for a period of 2 hrs in each of 3 mutually perpendicular axes Half of sine wave (100 G) shall be applied for a period of 5 msec. in each of 3 mutually perpendicular axes The specimen shall be subjected to standard atmospheric condition for 24 hours after which measurement shall be made. PAGE 6 OF 9 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 10. Packaging (1) Dimensions of Carrier Tape Dimensions in inches (mm) F Paper Tape Embossed Tape T1 T E J H D C G T1 A B T Dimensions in inches (mm) HFC1005 A 0.026 ± 0.001 (0.65 ± 0.03) B 0.79 ± 0.002 (2.00 ± 0.05) C 0.315 ± 0.004 (8.00 ± 0.10) D 0.138 ± 0.002 (3.50 ± 0.05) E 0.069 ± 0.004 (1.75 ± 0.10) HFC1410 0.047 ± 0.002 (1.20 ± 0.05) 0.157 ± 0.004 (4.00 ± 0.10) 0.315 ± 0.008 (8.00 ± 0.20) 0.138 ± 0.002 (3.50 ± 0.05) 0.069 ± 0.004 (1.75 ± 0.10) HFC1608 0.039 ± 0.002 (1.00 ± 0.05) 0.157 ± 0.004 (4.00 ± 0.10) 0.315 ± 0.008 (8.00 ± 0.20) 0.138 ± 0.002 (3.50 ± 0.05) 0.069 ± 0.004 (1.75 ± 0.10) HFC1610 0.047 ± 0.002 (1.20 ± 0.05) 0.157 ± 0.004 (4.00 ± 0.10) 0.315 ± 0.008 (8.00 ± 0.20) 0.138 ± 0.002 (3.50 ± 0.05) 0.069 ± 0.004 (1.75 ± 0.10) HFC1612 0.055 ± 0.002 (1.40 ± 0.05) 0.157 ± 0.004 (4.00 ± 0.10) 0.315 ± 0.008 (8.00 ± 0.20) 0.138 ± 0.002 (3.50 ± 0.05) 0.069 ± 0.004 (1.75 ± 0.10) Dimensions in inches (mm) F G H 0.157 ± 0.004 0.045 ± 0.001 0.059 +0.004/-0 HFC1005 (4.00 ± 0.10) (1.15 ± 0.03) (ø 1.50 +0.1/-0) J N/A T 0.026 ± 0.001 (0.65 ± 0.02) T1 0.024 ± 0.002 (0.60 ± 0.05) HFC1410 0.157 ± 0.004 0.063 ± 0.002 (4.00 ± 0.10) (1.60 ± 0.05) 0.061 ± 0.002 (ø 1.55 ± 0.05) 0.079 ± 0.002 0.012 ± 0.002 (2.00 ± 0.05) (0.30 ± 0.05) 0.047 ± 0.004 (1.20 ± 0.10) HFC1608 0.157 ± 0.004 0.071 ± 0.002 (4.00 ± 0.10) (1.80 ± 0.05) 0.061 ± 0.002 (ø 1.55 ± 0.05) 0.079 ± 0.002 0.012 ± 0.002 (2.00 ± 0.05) (0.30 ± 0.05) 0.030 or 0.037 ± 0.004 (0.75 or 0.95 ± 0.10) HFC1610 0.157 ± 0.004 0.071 ± 0.002 (4.00 ± 0.10) (1.80 ± 0.05) 0.061 ± 0.002 (ø 1.55 ± 0.05) 0.079 ± 0.002 0.012 ± 0.002 0.031 or 0.039 or 0.047 ± 0.004 (2.00 ± 0.05) (0.30 ± 0.05) (0.80 or 1.00 or 1.20 ± 0.10) HFC1612 0.157 ± 0.004 0.071 ± 0.002 (4.00 ± 0.10) (1.80 ± 0.05) 0.061 ± 0.002 (ø 1.55 ± 0.05) 0.079 ± 0.002 0.012 ± 0.002 (2.00 ± 0.05) (0.30 ± 0.05) 0.055 ± 0.004 (1.40 ± 0.10) PAGE 7 OF 9 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 (2) Reel specifications for taping E C D B W A Dimensions in inches (mm) A HFC Series HFC1005 only B 3.15 (80 min.) 7.00 ± 0.78 (178 ± 2) 2.36 (60 min.) C D E W 0.511 ± 0.02 (13 ± 0.5) 0.83 ± 0.03 (21 ± 0.8) 0.079 ± 0.02 (2 ± 0.5) 0.394 ± 0.059 (10 ± 1.5) (3) Standard Packing Quantity Chip Size Quantity 1005 10,000 pcs/reel 1410 3,000 pcs/reel 1608 4,000 pcs/reel 1610 3,000 pcs/reel 1612 3,000 pcs/reel PAGE 8 OF 9 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-226 R3 12. General Information (1) Storage (4) Cleaning The products shall be stored at 10°C to 35°C at the humidity of 30% to 70%. The products shall not be stored where they are exposed to harmless gases. (Ex. Hydrogen chloride, Sulfurous acid gas or Hydrogen sulfide) Soldering shall be done 12 months since delivery. When the former requirements are not satisfied, the solderability test shall be done prior to soldering. Cleaning using isopropyl alcohol shall be done at a temperature of 60°C or less within 5 minutes. It has been checked that the products aren’t damaged by ultrasonic cleaning at a cleaning agent temperature of 60°C or less, a frequency of 28kHz and a power of 20W within a minute. (6) Pattern design The land pattern is recommended as follows. (3) Soldering Ceramics are in general very sensitive to thermal shocks. Therefore the products shall not be exposed to a sudden temperature increase, decrease or partial heating. Preheat shall be done before using the soldering iron (ex. Hot wind etc.) Temperature difference between temperature of soldering iron tip and temperature of the products shall not exceed 130°C. The soldering iron shall not contact directly with the product, in order to avoid damage to the product. It is desirable that soldering temperature is 240°C to 250°C. Flux shall be colophony type. Strong acid type flux shall not be used. Wattage of the soldering iron shall be 20W or less at the temperature of 220°C to 250°C. The tip of soldering iron shall be 3ø or less. Application time of the soldering shall be 4 seconds or less. G Dimensions - inches (mm) Part L W 1005 0.015 (0.40) 0.020 (0.50) 1410 0.031 (0.80) 0.039 (1.00) 1608 0.039 (1.00) 0.031 (0.80) 1610 0.039 (1.00) 0.039 (1.00) 1612 0.039 (1.00) 0.047 (1.20) W 13. Recommended Soldering Conditions Recommended Condition for Flow Soldering Preheat 120 Seconds Max. Soldering 3-4 Seconds Max. Recommended Condition for Reflow Soldering Natural Cooling Preheat 180 Seconds Max. 120 Seconds Min. 250°C Soldering 10 Seconds Max. 250°C Natural Cooling 120 Seconds Min. 230°C - 250°C 150°C 150°C 230°C - 250°C PAGE 9 OF 9 Bolivar Drive ■ P.O. Box 547 ■ Bradford, PA 16701 ■ USA ■ 814-362-5536 ■ Fax 814-362-8883 ■ www.koaspeer.com Notice: The information contained in this Spec Sheet is believed to be accurate and up-to-date. KOA Speer Electronics reserves this right to change these specifications without notice.