SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005 D D D D D D description/ordering information These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage. 1OUT 1IN− 1IN+ VCC 2IN+ 2IN− 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN− 4IN+ GND 3IN+ 3IN− 3OUT LM124, LM124A . . . FK PACKAGE (TOP VIEW) 1IN− 1OUT NC 4OUT 4IN− D − LM224K, LM224KA − LM324K, LM324KA − LM2902K, LM2902KV, LM2902KAV Wide Supply Ranges − Single Supply . . . 3 V to 32 V (26 V for LM2902) − Dual Supplies . . . +1.5 V to +16 V (+13 V for LM2902) Low Supply-Current Drain Independent of Supply Voltage . . . 0.8 mA Typ Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground Low Input Bias and Offset Parameters − Input Offset Voltage . . . 3 mV Typ A Versions . . . 2 mV Typ − Input Offset Current . . . 2 nA Typ − Input Bias Current . . . 20 nA Typ A Versions . . . 15 nA Typ Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . 32 V (26 V for LM2902) Open-Loop Differential Voltage Amplification . . . 100 V/mV Typ Internal Frequency Compensation LM124 . . . D, J, OR W PACKAGE LM124A . . . J PACKAGE LM224, LM224A, LM224K, LM224KA . . . D OR N PACKAGE LM324, LM324K . . . D, N, NS, OR PW PACKAGE LM324A . . . D, DB, N, NS, OR PW PACKAGE LM324KA . . . D, N, NS, OR PW PACKAGE LM2902 . . . D, N, NS, OR PW PACKAGE LM2902K . . . D, DB, N, NS, OR PW PACKAGE LM2902KV, LM2902KAV . . . D OR PW PACKAGE (TOP VIEW) 1IN+ NC VCC NC 2IN+ 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4IN+ NC GND NC 3IN+ 2IN− 2OUT NC 3OUT 3IN− D 2-kV ESD Protection for: NC − No internal connection Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For example, the LM124 can be operated directly from the standard 5-V supply that is used in digital systems and provides the required interface electronics, without requiring additional ±15-V supplies. Copyright 2004, Texas Instruments Incorporated !" # $%&" !# '%()$!" *!"&+ *%$"# $ " #'&$$!"# '& ",& "&# &-!# #"%&"# #"!*!* .!!"/+ *%$" '$&##0 *&# " &$&##!)/ $)%*& "&#"0 !)) '!!&"&#+ '*%$"# $')!" " 11233 !)) '!!&"&# !& "&#"&* %)&## ",&.#& "&*+ !)) ",& '*%$"# '*%$" '$&##0 *&# " &$&##!)/ $)%*& "&#"0 !)) '!!&"&#+ POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005 description/ordering information (continued) ORDERING INFORMATION TA VIOmax AT 25°C MAX TESTED VCC PACKAGE† PDIP (N) SOIC (D) 7 mV 30 V SOP (NS) TSSOP (PW) 0°C 0 C to 70 70°C C PDIP (N) SOIC (D) 3 mV 30 V SOP (NS) SSOP (DB) TSSOP (PW) PDIP (N) 5 mV 30 V SOIC (D) −25°C to 85°C PDIP (N) 3 mV 30 V SOIC (D) Tube of 25 ORDERABLE PART NUMBER TOP-SIDE MARKING LM324N LM324N LM324KN LM324KN Tube of 50 LM324D Reel of 2500 LM324DR Tube of 50 LM324KD Reel of 2500 LM324KDR Reel of 2000 LM324NSR Tube of 50 LM324KNS Reel of 2000 LM324KNSR Tube of 90 LM324PW Reel of 2000 LM324PWR Tube of 90 LM324KPW Reel of 2000 LM324KPWR Tube of 25 LM324AN LM324AN Tube of 25 LM324KAN LM324KAN Tube of 50 LM324AD Reel of 2500 LM324ADR Tube of 50 LM324KAD Reel of 2500 LM324KADR Reel of 2000 LM324ANSR Tube of 50 LM324KANS Reel of 2000 LM324KANSR Reel of 2000 LM324ADBR Tube of 90 LM324APW Reel of 2000 LM324APWR Tube of 90 LM324KAPW Reel of 2000 LM324KAPWR Tube of 25 LM324 LM324K LM324 LM324K L324 L324K LM324A LM324KA LM324A LM324KA LM324A L324A L324KA LM224N LM224N LM224KN LM224KN Tube of 50 LM224D Reel of 2500 LM224DR Tube of 50 LM224KD Reel of 2500 LM224KDR Tube of 25 LM224AN LM224AN Tube of 25 LM224KAN LM224KAN Tube of 50 LM224AD Reel of 2500 LM224ADR Tube of 50 LM224KAD Reel of 2500 LM224KADR LM224 LM224K LM224A LM224KA † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005 ORDERING INFORMATION (CONTINUED) TA VIOmax AT 25°C MAX TESTED VCC LM2902N LM2902N Tube of 25 LM2902KN LM2902KN Tube of 50 LM2902D Reel of 2500 LM2902DR Tube of 50 LM2902KD Reel of 2500 LM2902KDR Reel of 2000 LM2902NSR Tube of 50 LM2902KNS Reel of 2000 LM2902KNSR Tube of 80 LM2902KDB Reel of 2000 LM2902KDBR Tube of 90 LM2902PW Reel of 2000 LM2902PWR Tube of 90 LM2902KPW Reel of 2000 LM2902KPWR SOIC (D) Reel of 2500 LM2902KVQDR L2902KV TSSOP (PW) Reel of 2000 LM2902KVQPWR L2902KV SOIC (D) Reel of 2500 LM2902KAVQDR L2902KA TSSOP (PW) Reel of 2000 LM2902KAVQPWR L2902KA CDIP (J) Tube of 25 LM124J LM124J CFP (W) Tube of 25 LM124W LM124W LCCC (FK) Tube of 55 LM124FK LM124FK Tube of 50 LM124D Reel of 2500 LM124DR CDIP (J) Tube of 25 LM124AJ LCCC (FK) Tube of 55 LM124AFK SOIC (D) SOP (NS) 7 mV −40°C −40 C to 125 125°C C SSOP (DB) TSSOP (PW) 32 V 2 mV 5 mV 32 V 30 V −55°C −55 C to 125 125°C C SOIC (D) 2 mV 30 V TOP-SIDE MARKING Tube of 25 PDIP (N) 26 V ORDERABLE PART NUMBER PACKAGE† LM2902 LM2902K LM2902 LM2902K L2902K L2902 L2902K LM124 LM124AJ LM124AFK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. symbol (each amplifier) − IN− OUT + IN+ POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005 schematic (each amplifier) VCC ≈6-µA Current Regulator ≈6-µA Current Regulator ≈100-µA Current Regulator OUT IN− † ≈50-µA Current Regulator IN+ † GND To Other Amplifiers COMPONENT COUNT (total device) Epi-FET Transistors Diodes Resistors Capacitors 1 95 4 11 4 † ESD protection cells - available on LM324K and LM324KA only 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC (see Note 1) LM2902 ALL OTHER DEVICES UNIT ±13 or 26 ±16 or 32 V ±26 ±32 V Input voltage, VI (either input) −0.3 to 26 −0.3 to 32 V Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C, VCC ≤ 15 V (see Note 3) Unlimited Unlimited D package 86 86 DB package 96 96 N package 80 80 NS package 76 76 PW package 113 Differential input voltage, VID (see Note 2) Package thermal impedance, θJA (see Notes 4 and 5) Package thermal impedance, qJC (see Notes 6 and 7) °C/W C/W 113 FK package 5.61 J package 15.05 W package 14.65 Operating virtual junction temperature, TJ 150 Case temperature for 60 seconds FK package Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J or W package 300 °C/W C/W 150 °C 260 °C 300 °C °C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND. 2. Differential voltages are at IN+, with respect to IN−. 3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction. 4. Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability. 5. The package thermal impedance is calculated in accordance with JESD 51-7. 6. Maximum power dissipation is a function of TJ(max), qJC, and TC. The maximum allowable power dissipation at any allowable case temperature is PD = (TJ(max) − TC)/qJC. Operating at the absolute maximum TJ of 150°C can affect reliability. 7. The package thermal impedance is calculated in accordance with MIL-STD-883. Storage temperature range, Tstg −65 to 150 −65 to 150 ESD protection TEST CONDITIONS Human-Body Model LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TYP ±2 UNIT kV 5 SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS† LM124 LM224 TA‡ MIN VIO Input offset voltage VCC = 5 V to MAX, VIC = VICRmin, VO = 1.4 V IIO Input offset current VO = 1.4 V IIB Input bias current VO = 1.4 V VICR Common-mode input voltage range VCC = 5 V to MAX TYP § MAX 3 5 25°C Full range 2 Full range 25°C VCC − 1.5 VCC − 1.5 25°C RL = 2 kΩ Full range 26 RL ≥ 10 kΩ Full range 27 VIC = VICRmin kSVR Supply-voltage rejection ratio (∆VCC /∆VIO) VO1/ VO2 Crosstalk attenuation Supply current (four amplifiers) Full range 5 20 100 V V 28 5 25 nA 20 mV 25°C 50 Full range 25 100 25°C 70 80 65 80 dB 25°C 65 100 65 100 dB 120 dB V/mV f = 1 kHz to 20 kHz 25°C VCC = 15 V, VID = 1 V, VO = 0 25°C −20 Full range −10 25°C 10 VCC = 15 V, VID = −1 V, VO = 15 V VID = −1 V, 27 nA −250 26 28 mV 50 −500 RL = 10 kΩ Common-mode rejection ratio ICC −300 RL = 2 kΩ CMRR Short-circuit output current −20 0 to VCC − 2 VCC = 15 V, VO = 1 V to 11 V, RL ≥ 2 kΩ IOS −150 0 to VCC − 2 Large-signal differential voltage amplification 7 150 Full range AVD 3 2 0 to VCC − 1.5 RL ≤ 10 kΩ Output current 30 0 to VCC − 1.5 VOL IO −20 Full range Low-level output voltage MAX 9 25°C VCC = MAX UNIT TYP § 100 25°C High-level output voltage MIN 7 25°C VOH LM324 LM324K 15 120 −30 −60 −20 −30 −60 Source −10 mA 20 10 30 12 20 Sink Full range 5 VO = 200 mV 25°C 12 5 VCC at 5 V, GND at −5 V VO = 0, 25°C ±40 ±60 ±40 ±60 VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2 VCC = MAX, VO = 0.5 VCC, No load Full range 1.4 3 1.4 3 µA 30 mA mA † All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for testing purposes is 26 V for LM2902 and 30 V for the others. ‡ Full range is −55°C to 125°C for LM124, −25°C to 85°C for LM224, and 0°C to 70°C for LM324. § All typical values are at TA = 25°C. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage TEST CONDITIONS† VCC = 5 V to MAX, VIC = VICRmin, VO = 1.4 V Non-A-suffix devices A-suffix devices ∆VIO/∆T Input offset voltage temperature drift RS = 0 Ω IIO Input offset current VO = 1.4 V ∆IIO/∆T Input offset current temperature drift IIB Input bias current VO = 1.4 V VICR Common-mode input voltage range VCC = 5 V to MAX LM2902 TA‡ MIN TYP § 25°C 3 Full range Full range 2 50 2 300 mV µV/°C 50 150 10 −20 −250 −20 −500 0 to VCC − 1.5 0 to VCC − 1.5 Full range 0 to VCC − 2 0 to VCC − 2 VCC − 1.5 VCC − 1.5 nA pA/°C −250 −500 25°C 25°C Full range 22 RL ≥ 10 kΩ Full range 23 AVD Large-signal differential voltage amplification VCC = 15 V, VO = 1 V to 11 V, RL ≥ 2 kΩ CMRR Common-mode rejection ratio VIC = VICRmin kSVR Supply-voltage rejection ratio (∆VCC /∆VIO) VO1/ VO2 Crosstalk attenuation Supply current (four amplifiers) 2 7 RL = 2 kΩ RL ≤ 10 kΩ ICC 7 nA V 25°C VOL IOS UNIT 4 Full range RL = 10 kΩ 24 5 27 20 100 5 25 20 mV 25°C 25 Full range 15 100 25°C 50 80 60 80 dB 25°C 50 100 60 100 dB 120 dB V/mV 25°C VCC = 15 V, VID = 1 V, VO = 0 25°C −20 Full range −10 25°C 10 Full range 5 Source V 26 Full range f = 1 kHz to 20 kHz VCC = 15 V, VID = −1 V, VO = 15 V VID = −1 V, MAX 10 1 Full range Low-level output voltage Short-circuit output current 3 Full range VCC = MAX Output current 7 Full range RL = 2 kΩ IO LM2902V TYP § 25°C 25°C High-level output voltage MIN 10 25°C VOH MAX 15 120 −30 −60 −20 −30 −60 −10 mA 20 10 12 20 Sink 5 µA VO = 200 mV 25°C 30 VCC at 5 V, GND at −5 V VO = 0, 40 25°C ±40 ±60 ±40 ±60 VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2 VCC = MAX, VO = 0.5 VCC, No load Full range 1.4 3 1.4 3 mA mA † All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for testing purposes is 26 V for LM2902 and 32 V for LM2902V. ‡ Full range is −40°C to 125°C for LM2902. § All typical values are at TA = 25°C. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 8 VO = 1.4 V VCC = 30 V Input offset current Input bias current Common-mode input voltage range IIO IIB VICR VCC = 15 V, VO = 1 V to 11 V, RL ≥ 2 kΩ Large-signal differential voltage amplification Common-mode rejection ratio Supply-voltage rejection ratio (∆VCC /∆VIO) Crosstalk attenuation Output current Short-circuit output current Supply current (four amplifiers) AVD CMRR kSVR VO1/ VO2 IO IOS ICC −50 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VO = 2.5 V, Full range Full range 25°C 25°C Full range 12 5 1.4 0.7 ±40 120 3 1.2 ±60 20 12 5 10 −10 −20 65 70 25 50 27 26 VCC − 1.5 1.4 0.7 ±40 30 20 −30 120 100 80 100 5 28 −15 2 2 TYP § LM224A † All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. ‡ Full range is −55°C to 125°C for LM124A, −25°C to 85°C for LM224A, and 0°C to 70°C for LM324A. § All typical values are at TA = 25°C. VO = 15 V, No load VCC at 5 V, VO = 0 VCC = 30 V, No load VO = 200 mV GND at −5 V, VID = −1 V, Sink VCC = 15 V, VID = −1 V, VO = 15 V 10 −10 Full range 25°C −20 25°C Source VCC = 15 V, VID = 1 V, VO = 0 65 70 25 50 27 26 25°C 25°C 25°C Full range 25°C Full range Full range Full range VCC − 1.5 0 to VCC − 2 0 to VCC − 2 Full range 25°C 0 to VCC − 1.5 0 to VCC − 1.5 MIN 25°C −100 25°C Full range 30 Full range 10 2 MAX 25°C 100 TYP § 4 MIN LM124A Full range 25°C TA‡ f = 1 kHz to 20 kHz VIC = VICRmin RL ≤ 10 kΩ Low-level output voltage RL ≥ 10 kΩ VOL VCC = 30 V RL = 2 kΩ High-level output voltage VOH RL = 2 kΩ VO = 1.4 V Input offset voltage VCC = 5 V to 30 V, VIC = VICRmin, VO = 1.4 V TEST CONDITIONS† VIO PARAMETER 3 1.2 ±60 −60 20 −100 −80 30 15 4 3 MAX electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) 12 5 10 −10 −20 65 65 15 25 27 26 VCC − 1.5 0 to VCC − 2 0 to VCC − 1.5 MIN 1.4 0.7 ±40 30 20 −30 120 100 80 100 5 28 −15 2 2 TYP § LM324A, LM324KA 3 1.2 ±60 −60 20 −200 −100 75 30 5 3 MAX mA mA µA mA dB dB dB V/mV mV V V nA nA mV UNIT 444444 4 4444 4 4 44 SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005 SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005 operating conditions, VCC = ±15 V, TA = 25°C PARAMETER TEST CONDITIONS TYP UNIT SR Slew rate at unity gain V/µs Unity-gain bandwidth RL = 1 MΩ, CL = 30 pF, VI = ±10 V (see Figure 1) RL = 1 MΩ, CL = 20 pF (see Figure 1) 0.5 B1 Vn 1.2 MHz Equivalent input noise voltage RS = 100 Ω, VI = 0 V, f = 1 kHz (see Figure 2) 35 nV/√Hz VCC+ − VI VO + VCC− CL RL Figure 1. Unity-Gain Amplifier 900 Ω VCC+ 100 Ω − VI = 0 V RS + VO VCC− Figure 2. Noise-Test Circuit POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 PACKAGE OPTION ADDENDUM www.ti.com 17-May-2008 PACKAGING INFORMATION Orderable Device Status (1) 5962-7704301VCA ACTIVE CDIP J 14 1 TBD 77043012A ACTIVE LCCC FK 20 1 TBD 7704301CA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type 7704301DA ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type 77043022A ACTIVE LCCC FK 20 1 TBD Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish A42 SNPB MSL Peak Temp (3) N / A for Pkg Type POST-PLATE N / A for Pkg Type POST-PLATE N / A for Pkg Type 7704302CA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type JM38510/11005BCA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type LM124ADR OBSOLETE SOIC D 14 TBD Call TI LM124AFKB ACTIVE LCCC FK 20 1 TBD LM124AJ ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type LM124AJB ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type Call TI POST-PLATE N / A for Pkg Type LM124D ACTIVE SOIC D 14 50 TBD CU NIPDAU Level-3-245C-168 HR LM124DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM124DR ACTIVE SOIC D 14 2500 TBD CU NIPDAU Level-3-245C-168 HR LM124DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM124FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type LM124J ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type LM124JB ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type LM124N OBSOLETE PDIP N 14 TBD Call TI Call TI LM124W ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type LM124WB ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type LM224AD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224ADE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224ADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224ADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM224ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM224D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224DR ACTIVE SOIC D 14 2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 17-May-2008 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM224DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KAD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KADE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KAN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM224KANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM224KD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KDE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KDG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM224KN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM224KNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM224N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM224NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM2902D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) no Sb/Br) Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 17-May-2008 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM2902DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KAVQDR ACTIVE SOIC D 14 2500 CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM LM2902KAVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-250C-UNLIM CU NIPDAU Level-1-260C-UNLIM Pb-Free (RoHS) MSL Peak Temp (3) LM2902KAVQPWR ACTIVE TSSOP PW 14 2000 LM2902KAVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) LM2902KD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDB ACTIVE SSOP DB 14 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDBE4 ACTIVE SSOP DB 14 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDBG4 ACTIVE SSOP DB 14 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM2902KNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM2902KNSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KNSRE4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KPW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 3 TBD Lead/Ball Finish PACKAGE OPTION ADDENDUM www.ti.com 17-May-2008 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM2902KPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KVQDR ACTIVE SOIC D 14 2500 CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM LM2902KVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902KVQPWR ACTIVE TSSOP PW 14 2000 CU NIPDAU Level-1-250C-UNLIM LM2902KVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM2902NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM2902NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902NSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902PWLE OBSOLETE TSSOP PW 14 LM2902PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2902QN OBSOLETE PDIP N 14 LM324AD ACTIVE SOIC D 14 LM324ADBLE OBSOLETE SSOP DB 14 LM324ADBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324ADBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324ADE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324ADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324ADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM Pb-Free (RoHS) TBD TBD 50 Call TI TBD Call TI Green (RoHS & no Sb/Br) CU NIPDAU TBD Addendum-Page 4 Lead/Ball Finish Call TI MSL Peak Temp (3) Call TI Call TI Level-1-260C-UNLIM Call TI PACKAGE OPTION ADDENDUM www.ti.com 17-May-2008 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM324AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM324ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM324ANSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324ANSRE4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324APW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324APWLE OBSOLETE TSSOP PW 14 LM324APWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KAD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KADE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KAN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM324KANE4 ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type Lead/Ball Finish MSL Peak Temp (3) no Sb/Br) TBD Addendum-Page 5 Call TI Call TI PACKAGE OPTION ADDENDUM www.ti.com 17-May-2008 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM324KANS PREVIEW SO NS 14 LM324KANSR ACTIVE SO NS LM324KANSRE4 ACTIVE SO LM324KANSRG4 ACTIVE LM324KAPW Lead/Ball Finish MSL Peak Temp (3) (RoHS) 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KAPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KAPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KAPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KAPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KAPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KDE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KDG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM324KNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM324KNS PREVIEW SO NS 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KNSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KNSRE4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KPW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 6 PACKAGE OPTION ADDENDUM www.ti.com 17-May-2008 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM324KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324KPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM324NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM324NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324NSRE4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324NSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324PWLE OBSOLETE TSSOP PW 14 TBD Call TI LM324PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM324Y OBSOLETE DIESALE Y 0 TBD Lead/Ball Finish Call TI MSL Peak Temp (3) Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 7 PACKAGE OPTION ADDENDUM www.ti.com 17-May-2008 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 8 PACKAGE MATERIALS INFORMATION www.ti.com 19-Mar-2008 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM224ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM224KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902KDBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 LM2902KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM2902KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM2902KPWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 LM2902NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM2902PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 LM324ADBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 LM324ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM324APWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 LM324DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com Device 19-Mar-2008 Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM324KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324KANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM324KAPWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 LM324KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 LM324KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM324KPWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 LM324NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 LM324PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM224ADR SOIC D 14 2500 346.0 346.0 33.0 LM224DR SOIC D 14 2500 346.0 346.0 33.0 LM224KADR SOIC D 14 2500 346.0 346.0 33.0 LM224KDR SOIC D 14 2500 346.0 346.0 33.0 LM2902DR SOIC D 14 2500 333.2 345.9 28.6 LM2902DR SOIC D 14 2500 346.0 346.0 33.0 LM2902KDBR SSOP DB 14 2000 346.0 346.0 33.0 LM2902KDR SOIC D 14 2500 346.0 346.0 33.0 LM2902KNSR SO NS 14 2000 346.0 346.0 33.0 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 19-Mar-2008 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM2902KPWR TSSOP PW 14 2000 346.0 346.0 29.0 LM2902NSR SO NS 14 2000 346.0 346.0 33.0 LM2902PWR TSSOP PW 14 2000 346.0 346.0 29.0 LM324ADBR SSOP DB 14 2000 346.0 346.0 33.0 LM324ADR SOIC D 14 2500 346.0 346.0 33.0 LM324ANSR SO NS 14 2000 346.0 346.0 33.0 LM324APWR TSSOP PW 14 2000 346.0 346.0 29.0 LM324DR SOIC D 14 2500 346.0 346.0 33.0 LM324DR SOIC D 14 2500 333.2 345.9 28.6 LM324KADR SOIC D 14 2500 346.0 346.0 33.0 LM324KANSR SO NS 14 2000 346.0 346.0 33.0 LM324KAPWR TSSOP PW 14 2000 346.0 346.0 29.0 LM324KDR SOIC D 14 2500 346.0 346.0 33.0 LM324KNSR SO NS 14 2000 346.0 346.0 33.0 LM324KPWR TSSOP PW 14 2000 346.0 346.0 29.0 LM324NSR SO NS 14 2000 346.0 346.0 33.0 LM324PWR TSSOP PW 14 2000 346.0 346.0 29.0 Pack Materials-Page 3 MECHANICAL DATA MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MLCC006B – OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee® Solutions amplifier.ti.com dataconverter.ti.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2008, Texas Instruments Incorporated