4000N S er ies Tubea x ia l 119x119x38mm Electrical connection: Terminals with 2 flat pins 2.8 x 0.5 mm. AC fans with external rotor shadedpole motor. Impedance protected against overloading. Fan housing with ground lug for screw M4 and UNC. Metal fan housing and impeller. W (lb gt. s) es 24 60 18.0 50 60 Sintec 3100 Terminals 1.21 4840N 4800N 4530N 4500N 4600N 4606N 6 7 8 9 10 10 50.0 57.1 88.9 99.5 105.9 105.9 115 115 115 115 115 115 60 60 60 60 60 60 10.0 9.0 16.0 15.0 18.0 18.0 26 32 45 48 50 51 75 75 65 65 60 90 Sintec Sintec Sintec Sintec Sintec Ball 1650 1750 2700 3000 3100 3100 Terminals Terminals Terminals Terminals Terminals Terminals 1.21 1.21 1.21 1.21 1.21 1.21 4890N 4850N 4580N 4550N 4650N 4656N 1 2 3 4 5 5 47.1 58.9 72.4 85.3 94.2 94.2 230 230 230 230 230 230 50/60 50/60 50/60 50/60 50/60 50/60 11.0 10.0 18.0 16.5 19.0 19.0 25 32 41 44 46 47 70 70 55 55 55 85 Sintec Sintec Sintec Sintec Sintec Ball 1550 1800 2350 2550 2650 2650 Terminals Terminals Terminals Terminals Terminals Terminals 1.21 1.21 1.21 1.21 1.21 1.21 4660N 10 105.9 115/230 50/60 18.0 51 60 Sintec 2650 Terminals 1.21 8) 1.5 (3 Fe dB He VA C e rv Cu Available on request: - Fan housing with mounting bosses. - Electrical connection via 2 single leads. - 3.7 mm mounting holes. at 105.9 A 10 rtz 4624N Part Number C @ FM 0 ur S (R pee PM d ) B Ty eari p e ng UL, CSA, VDE approvals on most models, please contact application engineering. M Te ax m Am p C b. P (W owe ) r Air intake over struts. Rotational direction CW looking at rotor. Types 4890N and 4840N air exhaust over struts. Mounting from either face using four 4.3 mm holes. .32 .23 (6) 4.13 (104.8) 4.92 (152) 4.13 4.69 (104 .8 ) (119 ) .169 (4.3) .177 (4 4.57 (116) .32 .5) e-mail: [email protected] · TEL: 860-674-1515 · FAX: 860-674-8536 ebm-papst Inc., 100 Hyde Road, Farmington, CT 06034 USA ebm-papst Inc., 2006 © ebm-papst Inc. reserves the right to change any specifications or data without notice 136