S Series Slide Switches Features/Benefits • 6 to 15 AMPS • Enclosed housing • PC and Snap-in panel mounting • Reversing option • RoHS compliant Typical Applications • Portable tools • Small appliances • Floor care products Models Available Slide I Specifications Materials CONTACT RATING: Q contact material (S1XX, S2XX Models): 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). (S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @ 250 V AC (UL/CSA). See page J-31 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30ºC to +65ºC STORAGE TEMPERATURE: -30ºC to +85ºC HOUSING: 6/6 nylon (UL94V-2), black. TOP PLATE: 6/6 nylon (UL94V-2), black. ACTUATOR: 6/6 nylon (UL94V-2), black (standard). CONTACTS: Q contact material: Copper, silver plated. See page I-31 for additional contact materials. TERMINALS: Q contact material: Copper, silver plated. See page I-31 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I–29 through I–32. For additional options not shown in catalog, consult Customer Service Center. Switch Function S101 SPST, 6 AMPS S202 (DPDT, 6 AMPS S802 DPDT, 15 AMPS S102 SPDT, 6AMPS S112 SPDT, mom., 6 AMPS S201 DPST, 6 AMPS S602 DPDT, 12 AMPS S701 SPST, 15 AMPS S702 SPDT, 15 AMPS Actuator 03 .335" high 04 .500" high 09 .250" high 12 Screwdriver slot (with marking) 13 Screwdriver slot (without marking) C2 Black cap C3 Red cap C5 Yellow cap Detent 1 With detent 2 Without detent Mounting Style SS Panel with mounting ears MS PC thru-hole S2 Snap-in panel with blacktop plate TS Panel with mounting ears Terminations 03 Solder lug with hole 02 PC Thru-hole 04 PC Thru-hole 07 Quick connect 08 PC Thru-hole WC Wire lead Housing Markings NONE No markings D ON-OFF L ON M ON-OFF N Red rectangle on one end Contact Material Q Silver B Gold G Gold over silver Seal NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change I–28 www.ck-components.com S Series Slide Switches SWITCH FUNCTION NO. POLES MODEL NO. AMP RATING SWITCH FUNCTION AVAILABLE MOUNTING STYLES SCHEMATIC S101 6 SPST S102 6 SPDT MS,SS S112 6 SPDT-MOM. MS,SS S701 15 SPST S1,S2,S3,ST S702 15 SPDT S1,S2,S3,ST NO. POLES SS SP MODEL NO. AMP RATING SWITCH FUNCTION SCHEMATIC AVAILABLE MOUNTING STYLES S201 6 DPST MS,SS,TS S202 6 DPDT MS,SS, TS S602 12 DPDT MS,SS, TS DP I SPST DPDT 15 S1,S2,S3,ST DPDT Part number shown: S202031SS03Q Part number shown: S101031SS03Q NOTE: and MOM. in table indicates momentary action. All models with all options when ordered with ‘G’ or ‘Q’ contact material. Contacts make on side actuator thrown. ACTUATOR 03 .335" HIGH 04 .500" HIGH 09 12 .250" HIGH NOTE: Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights are available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style, subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only. C2; C3; C5 13 SCREWDRIVER SLOT (WITH MARKING) White 115-230 markings (std.). SCREWDRIVER SLOT (WITHOUT MARKING) Without markings. SNAP-ON CAP OPTION CODE2 C1-CT CAP COLOR C2 BLACK C3 RED C5 YELLOW NOTE: Actuator finish: matte. If no color is specified, black will be supplied. Colored actuator caps may also be ordered separately and user installed, see page I-32. Available with S2 mounting style only. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change I–29 www.ck-components.com Slide S802 S Series Slide Switches DETENT 1 WITH DETENT Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802. 2 WITHOUT DETENT Standard with all momentary models: S112. MOUNTING STYLE SS PANEL WITH MOUNTING EARS I PANEL MOUNTING Slide AVAILABLE WITH: Models: S101, S102, S112, S201, S202 and S602 Terminations: All except 08 Actuators: 03, 04, 09, 12* and 13*. *12 and 13 actuators not available with S1XX models. S202031SS03Q DPDT MS PC THRU-HOLE AVAILABLE WITH: Models: S101, S102, S112, S201, S202, S602 Terminations: 02, 04 and 08 Actuators: 03, 04, 09, 12* and 13* *12 and 13 actuators available with S201, S202 and S602 models only. PC MOUNTING For mounting information, see TERMINATIONS section, page I-31. S202031MS02Q DPDT S2 SNAP-IN PANEL PANEL MOUNTING S802C21S207Q PANEL THICKNESS: .020(0,57)–.200(5,08) DPDT AVAILABLE WITH: Models: S701, S702, and S802 Terminations: 04, 07, 57 and WC Actuators: C2, C3, C5 and 03 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change I–30 www.ck-components.com S Series Slide Switches MOUNTING STYLE TS PANEL WITH MOUNTING EARS PANEL MOUNTING S202031TS03Q DPDT AVAILABLE WITH: Models: S201, S202, and S602 Terminations: All Actuators: 03, 04 and 12. I Slide TERMINATIONS 03 02 SOLDER LUG WITH HOLE 04 PC THRU-HOLE PC THRU-HOLE PC MOUNTING 02 & 04 terminations Recommended with ‘MS’ mounting style only. 07 QUICK CONNECT 08 Recommended with double pole models only. WC PC THRU-HOLE WIRE LEAD .113 ± .015 (2,87 ± 0,38) .118 ± .015 (3,00 ± 0,38) .503 ± .015 (12,78 ± 0,38) .140 (3,56) 08 terminations with MS mounting style. .368 ± .015 (9,35 ± 0,38) 18 AWG wire for S1XX and S2XX models. 16 AWG wire for all other models. Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. MS mounting style only. NOTE: All terminals on S1XX, S2XX and S6XX models are .020 (0,51) thick; all terminals on S7XX and S8XX models are .031 (0,79) thick. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change I–31 www.ck-components.com S Series Slide Switches TOP PLATE MARKINGS NONE D L ON-OFF M ON N ON-OFF RED RECTANGLE ON ONE END NOTE: Top plate markings are available with ‘S2’ mounting style only. The marking color on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard. Other marking colors are available, consult Customer Service Center. Slide I NO MARKINGS Note: Orientation of actuator markings and terminals. CONTACT MATERIAL OPTION CODE CONTACT MATERIAL Q SILVER 2 B GOLD 1 G RATINGS POWER LOW LEVEL/DRY CIRCUIT GOLD OVER LOW LEVEL/DRY SILVER 3 CIRCUIT OR POWER S1XX, S2XX MODELS: 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). S6XX MODELS: 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). S7XX, S8XX MODELS: 15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC (UL/CSA). 0.4 VA MAX. @20 V AC OR DC max. S1XX, S2XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). S6XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). S7XX, S8XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC (UL/CSA). * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. 2 CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. All models with all options when ordered with ‘G’ or ‘Q’ contact material. 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials. SEAL NONE E NO SEAL EPOXY SEAL EPOXY .075 MAX. (1,91) AVAILABLE HARDWARE Cap, C2; C3 actuators Cap, 03 actuator PART NO. PART NO. 121160100 121160200 121160300 121000101 121000102 121000103 WHITE BLACK RED Material: 6/6 Nylon Finish: Matte WHITE BLACK RED Material: 6/6 Nylon Finish: Gloss NOTE: Other cap colors available, consult Customer Service Center. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change I–32 www.ck-components.com