ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " UM Radial Lead Type, High Voltage series UM High voltage type (2.7V). Suitable for quick charge and discharge. Wide temperature range (– 25 to +70°C). Adapted to the RoHS directive (2002/95/EC). High Voltage UC Specifications Item Performance Characteristics Category Temperature Range – 25 to +70°C Rated Voltage Range 2.7V Rated Capacitance Range 0.47 to 47F See Note Capacitance Tolerance ± 20% , 20°C Leakage Current 0.5C (mA) [ C : Rated Capacitance(F)] (After 30 minutes' application of rated voltage, 2.7V) Stability at Low Temperature Capacitance (– 25°C) / Capacitance (+20°C) ×100 ESR, DCR* Refer to the list below (20°C). *DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 70°C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 1000 hours at 70°C. Capacitance change Shelf Life Marking Printed with white color letter on black sleeve. 70% Within ±30% of initial value 300% or less of initial specified value Less than or equal to the initial specified value ESR Leakage current Within ±30% of initial value 300% or less of initial specified value Less than or equal to the initial specified value ESR Leakage current Type numbering system (Example : 2.7V 10F) Drawing φd Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 P±0.5 φD+0.5MAX J UM T 1 1 0 6 MHD Configuration Capacitance tolerance (±20%) Rated Capacitance (10 F) Pressure relief vent Rated voltage (2.7V) L+ MAX. 15MIN 4MIN Series name Type (mm) φD 6.3 8 10 12.5 16 18 P 2.5 3.5 5.0 7.5 7.5 φd 0.5 0.6 0.6 5.0 0.6 0.8 0.8 Configuration (φD < 10) 1.5 (φD 10) 2.0 In case L>25 for the φ12.5 dia unit, lead dia φ d=0.8 φD Pb-free lead finishing Pb-free PET sleeve 6.3 ED 8 10 PD 12.5 to 18 HD • Please refer to page 20 for end seal configulation. Dimensions Rated Voltage ( Code ) 2.7V (T1) Rated Capacitance (F) 0.47 1.0 2.2 3.3 4.7 10 22 33 47 Code ESR (Ω) (at 1kHz) DCR (Ω) Case size φ D × L (mm) 474 105 225 335 475 106 226 336 476 4 2 2 1 0.4 0.2 0.2 0.1 0.1 9 5 2 1.5 1 0.3 0.2 0.1 0.1 6.3 × 9 8 × 11.5 8 × 20 10 × 20 12.5 × 20 12.5 × 31.5 16 × 31.5 18 × 31.5 18 × 40 Note : The capacitance calculated from discharge time (∆T) with constant current ( i ) after 30minuite charge with rated voltage (2.7V). The discharge current ( i ) is 0.01 × F (rated capacitance). A discharge time (∆T) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ∆T CAT.8100X