® Manual Insert Magnetic Card Reader 3S4YR-SBRN Compact, Highly Reliable Insert Reader Reads 62% of Magnetic Track ■ ■ ■ ■ ■ Effective strip length of 46.6 mm max. Microswitches incorporated for card detection Wide operating temperature range Low power CMOS technology Current save mode Housing compatible with SCR type for easy conversion to IC cards ■ TTL-compatible interface (clock & data) ■ Ordering Information Magnetic Tracks Supported (R, R/W) 1 2 3 Center JIS II IC Contact Interface Cable Cover Color Part Number R — — — — No TTL No No Black 3S4YR-SBR3N-50 — R — — — No TTL No No Black 3S4YR-SBR4N-50 — — R — — No TTL No No Black 3S4YR-SBR5N-50 Note: Consult the IC Card Basics section of this catalog for IC contact descriptions. ■ TYPICAL APPLICATIONS • Access Control • Time and Attendance • Remote Terminals for Computers • Telephones • Electronic Locks • Vending • ID Card Checkers • Gaming Machines Specifications Part number Recommended card type 3S4YR-SBRN Magnetic head Card feeding speed Service life 10 to 100 cm/sec (4 to 39 in/sec) Magnetic head 300,000 passes (one round trip) PCB 50,000 hours 5 VDC ± 10% Operating power supply Current consumption Operation 5 mA max., 3 mA mean Standby 1.5 mA max., 1 mA mean Mounting location Ambient temperature Ambient humidity Indoors away from wind, rain and sunlight. Operation -10° to 55°C (14° to 131°F) Storage -30° to 70°C (-22° to 158°F) Operation 10% to 95% RH without condensation Storage 10% to 95% RH without condensation Storage 300 m/sec2 (30 G) three times in each of X, Y, and Z directions for a total of 18 times. Vibration Shock ISO 7810, 7811/1-5, 7812, 7813. Please inquire if using high-coercivity cards. 10 to 55 Hz, 2 mm double amplitude, for 30 minutes in X, Y, and Z directions. Dimensions 78L x 60W x 21.5H mm (3.07L x 2.36W x 0.85H in) Weight 50 g (1.8 oz) 3S4YR-SBRN 3S4YR-SBRN Engineering Data ■ I/O INFORMATION ■ OUTPUT CIRCUIT DIAGRAM 3S4YR-SBR4N-50 +5 VDC 10-pin JAE single-pin header part number IL-10P-S3FP2-1. Connector JAE part number IL-10S-S3L-N. Pin # Output OV Output signal levels: Signal Input/Output Description 1 NC — Not connected 2 RDP Output Read data 3 RCP Output Read clock 4 CLS Output Card load 5 SW1-COM Output Card detection for rear 6 SW1-NO Input Card detection for rear 7 SW2-COM Output Card detection for front 8 SW2-NO Input Card detection for front VOL = 0.4 V at 4 mA 9 5 VDC — Vcc VOH = 3.5 V at 1 mA 10 0V — Ground Dimensions Unit: mm (inch) [37] ■ 3S4YR-SBRN-50 PCB 9 (0.35) ø8 30 (1.18) 5 (0.20) +4 7 -0 (0.28+.002 ) -0 23 ± 0.5 (0.91 ± 0.02) (Between center of head and card stop position) 42.4 ± 0.7 (1.67 ± 0.03) 4 (0.16) 21.5 (0.85) 9 (0.35) 3-M3 complete thread 5 6 (0.24) 5 (0.20) 8 (0.31) 58 ± 0.2 (2.28 ± 0.01) 24 ± 0.2 (0.94 ± .01) 48 ± 0.2 (1.89 ± .01) 60 ± 0.3 (2.36 ± 0.01) 40 ± 0.2 (1.57 ± 0.01) 21 (0.83) 78 ± 0.8 (3.07 ± 0.3) NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS, INC. One East Commerce Drive Schaumburg, IL 60173 2 1-800-55-OMRON Cat. No. GC CR3 OMRON CANADA, INC. 7/00 Specifications subject to change without notice. 885 Milner Avenue Scarborough, Ontario M1B 5V8 416-286-6465 Printed in U.S.A.