100GHz Compact Fiber Optical Interleaver CFOI100GHz Oplink’s compact, low-dispersion interleavers greatly expand wavelength channel counts in DWDM systems. Oplink’s DWDM interleavers feature excellent wide, flat passbands and high isolation. Both mux and demux functions are supported. Interleavers are athermal and do not require temperature control. Performance Specifications Parameter Central Wavelength Range (C-band) Central Frequency Range (C-band) Central Wavelength Range (L-band) Central Frequency Range (L-band) Channel Center Wavelength Input Channel Spacing Output Channel Spacing Clear Bandwidth Insertion Loss 1 Ripple Insertion Loss Uniformity Adjacent Channel Isolation Polarization Dependent Loss (PDL) Polarization Mode Dispersion (PMD) Chromatic Dispersion Return Loss Directivity Operating Power Handling Operating Temperature Storage Temperature Fiber Type Packaging Dimensions 3 Min. Max. Unit 1561.42 196000 1604.03 191000 nm GHz nm GHz Typical 1529.55 192000 1569.59 186900 ITU Grid 100 200 +/-15 1.5 0.2 0.3 1.8 0.4 0.5 25 0.3 0.2 -20 45 50 0.4 0.3 +20 50 55 24 65 +85 0 -40 Corning SMF-28 100 (L) x 28 (W) x 12 (H) GHz GHz GHz dB dB dB dB dB ps ps/nm dB dB dBm °C °C Features Low Insertion Loss High Isolation Low Dispersion Highly Stable & Reliable Epoxy-Free Optical Path Compact Size Completely Passive Athermal Design Applications DWDM Systems Extend Network Capacity mm Note: 1. The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. 2. All the parameters are excluding connectors. 3. The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified. Oplink Communications, Inc. R6.20080410 100 GHz Compact Fiber Optical Interleaver CFOI100 Series 46335 Landing Parkway Fremont, CA 94538-6407 Tel: (510 933-7200 Fax: (510) 933-7300 Email: [email protected] Mechanical Drawing / Package Dimensions (dimension in mm) Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink's OEM design team or account manager for your requirements and ordering information (510) 933-7200. CFOI 1 0 0 Input 100GHz= 100 2 0 W 0 Output 200GHz= 200 Band C band= C L band= L Fiber Length 1.0 meter= 1* 1.5 meter= 5 2.0 meter= 2 Fiber Jacket SMF-28 250µm bare fiber= 1 SMF-28 with 900µm loose tube= 2 Connector Type None= 1 FC/PC= 2 FC/SPC= 3 FC/APC= 4 SC/PC= 5 SC/SPC= 6 SC/APC= 7 ST= 8 LC= 9 MU= A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R6.20080410 Product Lines Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transceivers Interconnect RGB Laser Modules