SANYO LA5754MP

Ordering number : ENA0952
Monolithic Linear IC
LA5754MP
Separately-excited Step-down
Switching Regulator
(Variable Type)
Overview
The LA5754MP is a separately-excited step-down switching regulator (variable type).
Features
• High efficiency
• Four external parts
• Time-base generator (125kHz) incorporated
• Current limiter incorporated
• Thermal shutdown circuit incorporated
• Soft start circuit incorporated
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Input voltage
VIN max
Output current
IO max
SW pin application reverse voltage
Vsw
Allowable power dissipation
Pd max1
Infinite heat sink.
Pd max2
No heat sink.
Ratings
Unit
30
V
3
A
-1
V
7.5
W
1.75
W
150
°C
Junction temperature
Tj max
Operating temperature
Topr
-30 to +125
°C
Storage temperature
Tstg
-40 to +150
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer' s products or
equipment.
91907 MS PC B8-8724 No.A0952-1/5
LA5754MP
Recommended Operating Conditions at Ta = 25°C
Parameter
Symbol
Input voltage range
VIN
Operating junction temperature range
Tj op
Conditions
Ratings
Unit
5.5 to 28
V
-30 to +150
°C
Electrical Characteristics at Ta = 25°C
Parameter
Symbol
Ratings
Conditions
min
typ
Unit
max
Output voltage
VO
VIN = 15V, IO = 1.0A
2.53
2.66
2.76
V
Switching frequency
f
VIN = 15V, IO = 1.0A
100
125
150
kHz
Line regulation
∆VOLINE
VIN= 8 to 20V, IO=1.0A
25
80
mV
Load regulation
∆VOLOAD
VIN = 15V, IO = 0.5 to 1.5A
10
30
Output voltage temperature coefficient
∆VO/∆Ta
Ripple attenuation factor
RREJ
f = 100 to 120Hz
Current limiter operating voltage
IS
VIN = 15V
Thermal shutdown operating temperature
TSD
Thermal shutdown hysteresis width
∆TSD
±0.5
mV
mV/°C
45
dB
Designed target value*
165
°C
Designed target value*
15
°C
3.1
A
* Designed target value: No measurement made.
Package Dimensions
unit : mm (typ)
3275
Pd max -- Ta
4.5
1.5
9.9
1.3
4.5
(8.8)
1.2
10.0
(1.6)
0.9
1.7
0.2
0.4
1
5
2.7
SANYO : SMP5
Allowable power dissipation, Pd max -- W
4.5
Mounted on a specified board:
114.3×76.1×1.6mm3
Copper foil ratio 60% FR4
4.0
3.90
3.5
3.0
2.5
2.0
1.5
1.0
0.78
0.5
0
-30 -20
0
20
40
60
80
100
120
Ambient temperature, Ta -- °C
140
160
MSG07022
Pin Assignment
(1)VIN (2)SWOUT (3)GND (4)VOS (5)SS
No.A0952-2/5
LA5754MP
Block Diagram
VIN 1
2 SWOUT
Reg.
OCP
OSC
Reset
Drive
Comp.
TSD
4 VOS
Amp.
VREF
5 SS
3 GND
Application Circuit Example
L1
47µH
VIN
SWOUT
LA5754MP
C2
1000µF
D1
SBD
C1
1000µF
VOS
SS
GND
R2
R1
C3
1µF
Notes: C3 is for the soft start function. Delete C3 and keep the SS pin open when the soft function is not necessary.
Calculation equation to set the output voltage
This IC controls the switching output so that the VOS pin voltage becomes 2.66V (typ).
The equation to set the output voltage is as follows:
R2
VO = 1+
× 2.66V(typ)
R1
The VOS pin has the inrush current of 1µA (typ). Therefore, the error becomes larger when R1 and R2 resistance
values are large.
No.A0952-3/5
LA5754MP
Description of Functional Settings
1.Start delay function
The SS pin has the internally-connected 22µA (typ) constant-current supply. When the voltage of SS pin exceeds the
threshold voltage, the regulator starts operation. As the threshold is 0.62V(typ), the start delay time can be calculated
as follows:
ex. For setting at 1µF
Td =
C × V 1µ × 0.62
=
= 28.2 msec
22µ
i
2.Soft start function
The internal PWM waveform has the voltage value as shown in the right.
If down-conversion from the voltage of VIN = 15V to 3.3V output to be made,
for example, the PWM-ON duty has the value as shown below.
PWMduty =
VOUT + VF
= 25%
VIN - Vsat + VF
1.5V
0.62V
PWM wave
(Note that calculation is made with Vsat = 1V and VF = 0.2V)
The output voltage of error amplifier, which is 3.3V, is the value with PWM = 25%, as calculated in the above
equation, so that this voltage is determined as follows:
Ver = (∆VPWM) × PWMduty + VPWML = 0.88V × 0.25 + 0.62V = 0.84V
(∆VPWM is the PWM amplitude value or 0.88V(typ) while VPWML is the lower limit voltage of PWM
waveform or 0.62V(typ))
SS pin and error amplifier output voltages are designed to prefer the lower voltages, so that VOUT will reach the
designed regulation voltage in timing when the SS pin voltage exceeds the error amplifier output. Therefore, the soft
strt time is calculated as follows:
Tss =
C × ∆VPWM × PWMduty C × 0.88 × PWMduty
=
22µA
i
For the set conditions of C = 1µF and PWMduty = 25%:
Tss =
1µ × 0.88V × 0.25
= 10msec
22µA
No.A0952-4/5
LA5754MP
Timing Chart
VIN
SWOUT
VOUT
Td
Tss
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of September, 2007. Specifications and information herein are subject
to change without notice.
PS No.A0952-5/5