VS912SL Ordering number : ENA1506 SANYO Semiconductors DATA SHEET VS912SL Low Capacitance TVS Diode Array Protection Device of High-speed Data Lines Applications • • • • • • HDMI. USB 2.0. Mobile communication. Ethernet. LCD, camera. Notebooks and desktop computers, peripherals. Features • • • Very low capacitance 0.4pF typ. ESD / transient protection of high-speed data lines in applications according to: IEC61000-4-2 (ESD): ±20kV (air) ±20kV (contact), IEC61000-4-4 (EFT): 50A (5/50ns). Halogen free compliance. Specifications Absolute Maximum Ratings at Ta=25°C Parameter ESD Discharge *1 Symbol Peak Pulse Current *2 VESD Ipp Operating Temperature Range Storage Temperature Conditions contact Tp=8/20μs Ratings Unit 20 kV 3 A Top --40 to +125 °C Tstg --55 to +150 °C Note : *1 VESD according to IEC61000-4-2 *2 Ipp according to IEC61000-4-5 Marking : Z1 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. www.semiconductor-sanyo.com/network O2809RV TK IM TC-00002059 No. A1506-1/4 VS912SL Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Working Voltage Reverse Current VRWM V(BR) IR Clamping Voltage VCL Breakdown Voltage Forward Clamping Voltage VFC Line Capacitance CT Ratings Conditions min I(BR)=1mA, (I/O to GND) VR=5.3V, (I/O to GND) typ Unit max 5.3 V 50 nA V 6 V Ipp=1A, Tp=8/20μs, (I/O to GND) *3 10 13 Ipp=3A, Tp=8/20μs, (I/O to GND) *3 12 15 V Ipp=1A, Tp=8/20μs, (GND to I/O) *3 2 4 V Ipp=3A, Tp=8/20μs, (GND to I/O) *3 4 6 V VR=0V, f=1MHz, (I/O to GND) 0.4 0.6 pF VR=0V, f=1MHz, (I/O to I/O) 0.2 0.3 pF Note : *3 Ipp according to IEC61000-4-5 Package Dimensions Electrical Connection unit : mm (typ) 7065-001 9 8 7 6 2.3 9 8 7 6 1.0 1 1 2 3 4 5 3 4 5 Top view 0.05 MAX 0.5 2 3 0.2 4 5 7 6 0.35 0.59 1 0.94 0.31 0.308 Pin 1 Marking Area 2 1 : I/O1 2 : I/O2 3 : GND 4 : I/O3 5 : I/O4 6 : NC 7 : NC 8 : NC 9 : NC 9 8 0.4 1 : I/O1 2 : I/O2 3 : GND 4 : I/O3 5 : I/O4 6 : NC 7 : NC 8 : NC 9 : NC SANYO:TSLP-9-1 No. A1506-2/4 VS912SL Application Example +5V HDMI Type A Connector HDMI Source/Sink 1 TMDS Data2 2 3 VS912SL 4 5 TMDS Data1 6 TSDM Channels 7 TMDS Data0 8 9 VS912SL 10 11 TMDS Clock 12 CEC 13 CEC Line SCL 14 N.C. 15 VS912SL 16 SDA Hot Plug Detect DDC(I2C Bus) 17 DDC/CEC GND 18 +5V 19 Hot Plug Detect VS909SL IT14836 Clamping Voltage 14 12 11 10 9 8 0 10-6 7 5 3 2 10-7 7 5 3 2 10-8 7 5 3 2 -9 10 7 5 3 2 10-10 7 5 3 2 -11 10 25 1 2 3 4 Peak Pulse Current, Ipp -- A IT14735 Reverse Current 4 3 2 1 0 0 1 2 3 4 Peak Pulse Current, Ipp -- A 5 IT14736 Line Capacitance 0.6 VR=5.3V I/O to GND f=1MHz I/O to GND 0.5 Line Capacitance, CT -- pF Reverse Current, IR -- A 7 tp=8/20μs GND to I/O 5 Clamping Voltage, VFC -- V Clamping Voltage, VCL -- V 13 Forward Clamping Voltage 6 tp=8/20μs I/O to GND 0.4 0.3 0.2 0.1 50 75 100 Temperature, T -- °C 125 150 IT14737 0 0 1 2 3 Reverse Voltage, VR -- V 4 5 IT14738 No. A1506-3/4 VS912SL Line Capacitance 0.6 0.7 I/O to GND 0.6 Line Capacitance, CT -- pF Line Capacitance, CT -- pF 0.5 VR=0V 0.4 VR=5.3V 0.3 0.2 0.1 0 Line Capacitance f=1MHz VR=0V 0.5 V R=5.3V 0.4 V R=0V 0.3 0.2 0.1 0 500 1000 1500 2000 Frequency, f -- MHz 2500 3000 IT14739 0 --50 --25 0 25 50 75 Temperature, T -- °C 100 IT14740 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of October, 2009. Specifications and information herein are subject to change without notice. PS No. A1506-4/4