PICkit™ 3
Programmer/Debugger
User’s Guide
2010 Microchip Technology Inc.
DS51795B
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,
PIC32 logo, rfPIC and UNI/O are registered trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MXDEV, MXLAB, SEEVAL and The Embedded Control
Solutions Company are registered trademarks of Microchip
Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified
logo, MPLIB, MPLINK, mTouch, Octopus, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance,
TSHARC, UniWinDriver, WiperLock and ZENA are
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2010, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-60932-373-8
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS51795B-page 2
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 5
Chapter 1. Overview
1.1 Introduction ................................................................................................... 13
1.2 PICkit 3 Programmer/Debugger Defined ...................................................... 13
1.3 How the PICkit 3 Programmer/Debugger Helps You ................................... 15
1.4 PICkit 3 Programmer/Debugger Components .............................................. 16
Chapter 2. Theory of Operation
2.1 Introduction ................................................................................................... 17
2.2 PICkit 3 vs. PICkit 2 ...................................................................................... 17
2.3 Debugger to Target Communication ............................................................ 17
2.4 Communication Connections ....................................................................... 19
2.5 Debugging .................................................................................................... 21
2.6 Requirements for Debugging ....................................................................... 22
2.7 Programming ................................................................................................ 24
2.8 Resources Used by the Debugger ............................................................... 24
Chapter 3. Installation
3.1 Introduction ................................................................................................... 25
3.2 Installing the Software .................................................................................. 25
3.3 Connecting the Target .................................................................................. 25
3.4 Setting Up the Target Board ......................................................................... 26
3.5 Setting Up MPLAB® IDE .............................................................................. 27
Chapter 4. General Setup
4.1 Introduction ................................................................................................... 29
4.2 Starting the MPLAB IDE Software ................................................................ 29
4.3 Creating a Project ......................................................................................... 29
4.4 Viewing the Project ....................................................................................... 30
4.5 Building the Project ...................................................................................... 30
4.6 Setting Configuration Bits ............................................................................. 30
4.7 Setting the Debugger or Programmer .......................................................... 30
4.8 Debugger/Programmer Limitations .............................................................. 31
Chapter 5. PICkit 3 Debug Express
5.1 Introduction ................................................................................................... 33
5.2 PICkit 3 Debug Express Kit Contents ........................................................... 33
5.3 Installing the Hardware and Software .......................................................... 33
2010 Microchip Technology Inc.
DS51795B-page 3
PICkit™ 3 User’s Guide
Chapter 6. PICkit 3 Programmer-To-Go
6.1 Introduction ................................................................................................... 35
6.2 USB Power for PICkit 3 Programmer-To-Go ................................................ 35
6.3 PICkit 3 Programmer-To-Go Supported Devices ......................................... 36
6.4 Setting up PICkit 3 for Programmer-To-Go Operation ................................. 37
6.5 Using PICkit 3 Programmer-To-Go .............................................................. 38
6.6 Exiting Programmer-To-Go Mode ................................................................ 40
Chapter 7. Troubleshooting First Steps
7.1 Introduction ................................................................................................... 43
7.2 The 5 Questions to Answer First .................................................................. 43
7.3 Top 10 Reasons Why You Can’t Debug ...................................................... 43
7.4 Other Things to Consider ............................................................................. 44
Chapter 8. Frequently Asked Questions (FAQs)
8.1 Introduction ................................................................................................... 45
8.2 How Does It Work ........................................................................................ 45
8.3 What’s Wrong ............................................................................................... 46
Chapter 9. Error Messages
9.1 Introduction ................................................................................................... 49
9.2 Specific Error Messages .............................................................................. 49
9.3 General Corrective Actions .......................................................................... 52
Chapter 10. Debugger Function Summary
10.1 Introduction ................................................................................................. 57
10.2 Debugging Functions ................................................................................. 57
10.3 Debugging Dialogs/Windows ..................................................................... 59
10.4 Programming Functions ............................................................................. 63
10.5 Settings Dialog ........................................................................................... 64
Appendix A. Hardware Specification
A.1 Introduction .................................................................................................. 69
A.2 Highlights ..................................................................................................... 69
A.3 Declaration of Conformity ............................................................................ 69
A.4 USB Port/Power ........................................................................................... 70
A.5 PICkit 3 Programmer/Debugger ................................................................... 70
A.6 Standard Communication Hardware ............................................................ 71
A.7 Target Board Considerations ....................................................................... 73
Appendix B. PICkit 3 Schematics
Glossary .......................................................................................................................77
Index .............................................................................................................................97
Worldwide Sales and Service ...................................................................................100
DS51795B-page 4
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB® IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
PICkit™ 3 programmer/debugger. Items discussed include:
•
•
•
•
•
•
•
•
Document Layout
Conventions Used in this Guide
Warranty Registration
Recommended Reading
The Microchip Web Site
Development Systems Customer Change Notification Service
Customer Support
Revision History
2010 Microchip Technology Inc.
DS51795B-page 5
PICkit™ 3 User’s Guide
DOCUMENT LAYOUT
This document describes how to use the PICkit 3 as a development tool to emulate and
debug firmware on a target board. The manual layout is as follows:
• Chapter 1. Overview – An overview of the PICkit 3 programmer/debugger.
• Chapter 2. Theory of Operation – A simplified description of how the PICkit 3
programmer/debugger works.
• Chapter 3. Installation – How to install the PICkit 3 programmer/debugger.
• Chapter 4. General Setup – Provides Instructions on how to get started using the
PICkit 3 programmer/debugger to program supported devices.
• Chapter 5. PICkit 3 Debug Express – Provides basic information on using the
PICkit™ 3 Debug Express.
• Chapter 6. PICkit 3 Programmer-To-Go – Provides instruction on using the
PICkit 3 unit to program devices without being connected to a PC.
• Chapter 7. Troubleshooting First Steps – Begins the troubleshooting process
by identifying first steps and common reasons for problems with debugging.
• Chapter 8. Frequently Asked Questions (FAQs) – Provides information on
solving common problems.
• Chapter 9. Error Messages – Provides specific error messages and general
corrective actions.
• Chapter 10. Debugger Function Summary – Summarizes the available
debugging functions.
• Appendix A. Hardware Specification – Details hardware and electrical
specifications for the PICkit 3.
• Appendix B. PICkit 3 Schematics – Provides hardware schematic diagrams for
the PICkit 3 programmer/debugger.
DS51795B-page 6
2010 Microchip Technology Inc.
Preface
CONVENTIONS USED IN THIS GUIDE
The following conventions may appear in this documentation:
DOCUMENTATION CONVENTIONS
Description
Represents
Examples
Arial font:
MPLAB® IDE User’s Guide
Italic
Referenced books
Emphasized text
...is the only compiler...
Initial caps
A window
the Output window
A dialog
the Settings dialog
A menu selection
select Enable Programmer
Quotes
A field name in a window or
dialog
“Save project before build”
Underlined, italic with right
angle bracket
A menu path
File>Save
Bold characters
A dialog button
Click OK
A tab
Click the Power tab
Text in angle brackets < >
A key on the keyboard
Press <Enter>, <F1>
Sample source code
#define START
Filenames
autoexec.bat
File paths
c:\mcc18\h
Keywords
_asm, _endasm, static
Command-line options
-Opa+, -Opa-
Bit values
0, 1
Constants
0xFF,’A’
Italic
A variable argument
file.o, where file can be
any valid filename
Square brackets [ ]
Optional arguments
mpasmwin [options]
file [options]
Curly brackets and pipe
character: { | }
Choice of mutually exclusive
arguments; an OR selection
errorlevel {0|1}
Ellipses...
Replaces repeated text
var_name [,
var_name...]
Represents code supplied by
user
void main (void)
{ ...
}
Courier New font:
Plain
2010 Microchip Technology Inc.
DS51795B-page 7
PICkit™ 3 User’s Guide
WARRANTY REGISTRATION
Please complete the enclosed Warranty Registration Card and mail it promptly.
Sending in the Warranty Registration Card entitles users to receive new product
updates. Interim software releases are available at the Microchip web site.
RECOMMENDED READING
This user’s guide describes how to use PICkit 3 . Other useful documents are listed
below. The following Microchip documents are available and recommended as
supplemental reference resources.
In-Circuit Debugger Design Advisory (DS51764)
Please read this first! This document contains important information about
operational issues that should be considered when using the PICkit 3 with your target
design.
44-Pin Demo Board User’s Guide (DS41296)
Consult this document for instructions on how to use the 44-Pin demo board as a
development tool to emulate and debug firmware on a target board.
Low Pin Count Demo Board User’s Guide (DS51556)
Consult this document for instructions on how to use Microchip Technology’s low pin
count device (8-pin, 14-pin and 20-pin). This document includes a series of tutorials.
MPLAB® IDE User’s Guide/Help (DS51519)
Consult this document for more information pertaining to the installation and features
of the MPLAB Integrated Development Environment (IDE) software. An online Help
version is also available.
In-Circuit Serial Programmer™ (ICSP™) Guide (DS30277)
This document contains helpful design guidelines for successful ICSP programming. It
includes application notes on hardware designs and the ICSP programming
specifications.
MPASM™ Assembler, MPLINK™ Object Linker, MPLIB™ Object Librarian User’s
Guide (DS33014)
Describes how to use the Microchip PIC® MCU assembler (MPASM assembler), linker
(MPLINK linker), and librarian (MPLIB librarian).
README for PICkit™ 3 Debug Express
For the latest information on using the PICkit 3 Debug Express, read the “Readme for
PICkit 3.htm” file (an HTML file) in the Readmes subdirectory of the MPLAB IDE
installation directory. The Readme file contains updated information and known issues
that may not be included in this user’s guide.
PICkit™ 3 Debug Express C18 Lessons
These tutorials guide you through using the PICkit 3 Debug Express with the MPLAB
C Compiler for PIC18 MCU’s. They are available on the MPLAB IDE CDROM and on
the Microchip web site.
Readme Files
For the latest information on using other tools, read the tool-specific Readme files in
the Readmes subdirectory of the MPLAB IDE installation directory. The Readme files
contain updated information and known issues that may not be included in this user’s
guide.
DS51795B-page 8
2010 Microchip Technology Inc.
Preface
THE MICROCHIP WEB SITE
Microchip provides online support via our web site at www.microchip.com. This web
site is used as a means to make files and information easily available to customers.
Accessible by using your favorite internet browser, the web site contains the following
information:
• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives
DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE
Microchip’s customer notification service helps keep customers current on Microchip
products. Subscribers will receive e-mail notification whenever there are changes,
updates, revisions or errata related to a specified product family or development tool of
interest.
To register, access the Microchip web site at www.microchip.com, click on Customer
Change Notification and follow the registration instructions.
The Development Systems product group categories are:
• Compilers – The latest information on Microchip C compilers, assemblers, linkers
and other language tools. These include all MPLAB C compilers; all MPLAB
assemblers (including MPASM™ assembler); all MPLAB linkers (including
MPLINK™ object linker); and all MPLAB librarians (including MPLIB™ object
librarian).
• Emulators – The latest information on Microchip in-circuit emulators.This
includes the MPLAB REAL ICE™ and MPLAB ICE 2000 in-circuit emulators.
• In-Circuit Debuggers – The latest information on the Microchip in-circuit
debuggers. This includes MPLAB ICD 3 in-circuit debuggers and PICkit™ 2 and 3
debug express.
• MPLAB® IDE – The latest information on Microchip MPLAB IDE, the Windows®
Integrated Development Environment for development systems tools. This list is
focused on the MPLAB IDE, MPLAB IDE Project Manager, MPLAB Editor and
MPLAB SIM simulator, as well as general editing and debugging features.
• Programmers – The latest information on Microchip programmers. These include
production programmers such as MPLAB REAL ICE in-circuit emulator, MPLAB
ICD 3 in-circuit debugger, and MPLAB PM3 device programmers. Also included
are nonproduction development programmers such as PICSTART® Plus and
PICkit 1, 2 and 3.
2010 Microchip Technology Inc.
DS51795B-page 9
PICkit™ 3 User’s Guide
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
•
•
•
•
Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document. See our web site
for a complete, up-to-date listing of sales offices.
Technical support is available through the web site at: http://support.microchip.com.
Documentation errors or comments may be e-mailed to [email protected].
REVISION HISTORY
Revision A (January 2009)
This is the initial release of this document.
Revision B (July 2010)
Section 1.5 Device and Feature Support has been removed. It is available through the
PICkit 3 online help in MPLAB IDE.
Section 2.4.4 Debugger Powered – third paragraph was replaced.
Section 2.7 Programming – modified to include the three ways to program a device.
Added a new Chapter 6. PICkit 3 Programmer-To-Go.
Table 10.6 Program Memory Options – added new option for “Use high voltage on
MCLR” to table.
Section 10.5.8 Settings Dialog, Power Tab – added explanatory text regarding the
“Power target circuit from PICkit 3” option.
Section 10.5.10 Setting Dialog, Programmer-to-go Tab has been added.
Renamed Chapter 11 Hardware Specification to Appendix A Hardware Specification.
DS51795B-page 10
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Part 1 – Getting Started
Chapter 1. Overview..................................................................................................... 13
Chapter 2. Theory of Operation .................................................................................. 17
Chapter 3. Installation.................................................................................................. 25
Chapter 4. General Setup ............................................................................................ 29
Chapter 5. PICkit 3 Debug Express ............................................................................ 33
2010 Microchip Technology Inc.
DS51795B-page 11
PICkit™ 3 User’s Guide
NOTES:
DS51795B-page 12
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 1. Overview
1.1
INTRODUCTION
An overview of the PICkit 3 programmer/debugger system is given.
• PICkit 3 Programmer/Debugger Defined
• How the PICkit 3 Programmer/Debugger Helps You
• PICkit 3 Programmer/Debugger Components
1.2
PICkit 3 PROGRAMMER/DEBUGGER DEFINED
The PICkit 3 programmer/debugger (see Figure 1-1) is a simple, low-cost in-circuit
debugger that is controlled by a PC running MPLAB IDE (v8.20 or greater) software on
a Windows® platform. The PICkit 3 programmer/debugger is an integral part of the
development engineer’s toolsuite. The application usage can vary from software
development to hardware integration.
The PICkit 3 programmer/debugger is a debugger system used for hardware and
software development of Microchip PIC® microcontrollers (MCUs) and dsPIC® Digital
Signal Controllers (DSCs) that are based on In-Circuit Serial Programming™ (ICSP™)
and Enhanced In-Circuit Serial Programming 2-wire serial interfaces. In addition to
debugger functions, the PICkit 3 programmer/debugger system also may be used as a
development programmer. The PICkit 3 programmer/debugger is not intended to be
used as a production programmer.
The debugger system executes code like an actual device because it uses a device
with built-in emulation circuitry, instead of a special debugger chip, for emulation. All
available features of a given device are accessible interactively, and can be set and
modified by the MPLAB IDE interface.
The PICkit 3 debugger was developed for emulating embedded processors with debug
facilities. The PICkit 3 features include:
•
•
•
•
•
•
•
•
Full-speed USB support using Windows standard drivers
Real-time execution
Processors run at maximum speeds
Built-in over-voltage/short circuit monitor
Low voltage to 5V (1.8-5V range)
Diagnostic LEDs (power, active, status)
Read/write program and data memory of microcontroller
Erase of all memory types (EEPROM, ID, configuration and program) with
verification
• Peripheral freeze at breakpoint
2010 Microchip Technology Inc.
DS51795B-page 13
PICkit™ 3 User’s Guide
FIGURE 1-1:
PICkit™ 3 MCU PROGRAMMER/DEBUGGER
2
1
Legend:
1 – Lanyard Connection
2 – USB Port Connection
3 – Pin 1 Marker
4 – Programming Connector
5 – Status LEDs
6 – Push Button
6
5
3
4
1.2.1
Lanyard Connection
A convenient lanyard connection is available on the programmer.
1.2.2
USB Port Connection
The USB port connection is a USB mini-B connector. Connect the PICkit 3 to the PC using
the supplied USB cable.
1.2.3
Pin 1 Marker
This marker designates the location of pin 1 for proper connector alignment.
1.2.4
Programming Connector
The programming connector is a 6-pin header (0.100" spacing) that connects to the
target device. See the pinout specification in Figure 1-2.
DS51795B-page 14
2010 Microchip Technology Inc.
Overview
FIGURE 1-2:
PICkit™ 3 PROGRAMMER CONNECTOR PINOUT
Pin 1 Indicator
Pin Description*
1
2
3
4
5
6
1 = MCLR/VPP
2 = VDD Target
3 = VSS (ground)
4 = PGD (ICSPDAT)
5 = PGC (ICSPCLK)
6 = PGM (LVP)
*
Note:
1.2.5
The 6-pin header (0.100" spacing) accepts 0.025" square pins.
The programming connector pin functions are different for programming
Serial EEPROM devices. See the ReadMe file for the PICkit 3
(Help>Readme) included with the MPLAB IDE software for these pinouts.
Status LEDs
The Status LEDs indicate the status of the PICkit 3.
1. Power (green) – Power is supplied to the PICkit 3 via the USB port.
2. Active (blue) – The PICkit 3 has connection to the PC USB port and the
communication link is active.
3. Status:
Busy (yellow) – The PICkit 3 is busy with a function in progress, such as
programming.
Error (red) – The PICkit 3 has encountered an error.
1.2.6
Push Button
The push button is used for Programmer-To-Go. See Chapter 6. “PICkit 3
Programmer-To-Go”.
1.3
HOW THE PICkit 3 PROGRAMMER/DEBUGGER HELPS YOU
The PICkit 3 programmer/debugger allows you to:
•
•
•
•
•
•
Debug your application on your own hardware in real time
Debug with hardware breakpoints
Set breakpoints based on internal events
Monitor internal file registers
Emulate at full speed
Program your device
2010 Microchip Technology Inc.
DS51795B-page 15
PICkit™ 3 User’s Guide
1.4
PICkit 3 PROGRAMMER/DEBUGGER COMPONENTS
The components of the PICkit 3 programmer/debugger system are:
1. PICkit 3 with indicator lights for power, activity and status.
2. USB cable to provide communications between the debugger and a PC and to
provide power to the debugger.
3. CD-ROM with MPLAB IDE software and online documentation.
FIGURE 1-3:
BASIC DEBUGGER SYSTEM
Indicator
Lights
PICkit™ 3
USB Cable to PC
To Target Board
Additional hardware that may be ordered separately:
• PICkit 3 Debug Express Kit which includes:
- a 44-pin demo board with a PIC18F45K20 MCU
- free version of MPLAB C Compiler for PIC18 MCUs
- easy-to-understand lessons and tutorials
- other software utilities, examples with source code and full documentation
• Transition socket
• ICD headers
• MPLAB IDE processor extension kits
DS51795B-page 16
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 2. Theory of Operation
2.1
INTRODUCTION
A simplified description of how the PICkit 3 programmer/debugger system works is
provided here. It is intended to provide enough information so a target board can be
designed that is compatible with the debugger for both emulation and programming
operations. The basic theory of in-circuit emulation and programming is described so
that problems, if encountered, are quickly resolved.
•
•
•
•
•
•
•
2.2
PICkit 3 vs. PICkit 2
Debugger to Target Communication
Communication Connections
Debugging
Requirements for Debugging
Programming
Resources Used by the Debugger
PICkit 3 VS. PICkit 2
The PICkit 3 programmer/debugger system is similar in function to the PICkit 2
in-circuit debugger system. Similarities of the two debuggers include:
• Powered via USB cable to PC
• Provides a programmable voltage power supply
The PICkit 3 differs from the PICkit 2 by providing:
• Extended EE program image space (512 Kbytes)
• True voltage reference
• Increased voltage range (1.8-5V VDD; 1.8-14V VPP)
2.3
DEBUGGER TO TARGET COMMUNICATION
The debugger system configurations are discussed in the following sections.
CAUTION
Do not change hardware connections while the PICkit 3 or target is powered.
Standard ICSP Device Communication
The debugger system can be configured to use standard ICSP communication for both
programming and debugging functions. This 6-pin connection is the same one used by
the PICkit 2 programmer/debugger.
2010 Microchip Technology Inc.
DS51795B-page 17
PICkit™ 3 User’s Guide
The modular cable can be either (1) inserted into a matching socket at the target, where
the target device is on the target board (Figure 2-1), or (2) inserted into a standard
adapter/header board combo (available as a Processor Pak), which is then plugged
into the target board (Figure 2-2).
Note:
Older header boards used a 6-pin (RJ-11) connector instead of an 8-pin
connector, so these headers may be connected to the debugger with the
AC164110 ICSP adapter.
For more on standard communication, see Appendix A. “Hardware Specification”.
FIGURE 2-1:
STANDARD DEBUGGER SYSTEM – DEVICE WITH
ON-BOARD ICE CIRCUITRY
PICkit™ 3
Target Device
or PIM
Mini-USB
cable
to PC
Target Board
Power
FIGURE 2-2:
STANDARD DEBUGGER SYSTEM – ICE DEVICE
AC164110
Adapter
Mini-USB
cable
to PC
PICkit™ 3
Device-ICE
Power
Header
Transition Socket
DS51795B-page 18
Target Board
2010 Microchip Technology Inc.
Theory of Operation
2.4
COMMUNICATION CONNECTIONS
2.4.1
Communication Target Connections
2.4.1.1
USING SINGLE IN-LINE CONNECTOR
Use the 6-pin in-line connector between the PICkit 3 programmer/debugger and the
target board connector. See Figure 2-1. Also see Table 2-1 and
Section A.6 “Standard Communication Hardware”.
TABLE 2-1:
2.4.1.2
TARGET CONNECTOR PINOUT
Connector Pin
Microcontroller Pin
1
MCLR/VPP
2
VDD
3
Ground
4
PGD (ICSPDAT)
5
PGC (ICSPCLK)
6
PGM (LVP)
USING AN ADAPTER
Use the AC164110 adapter between the PICkit 3 programmer/debugger and the target
device with the modular interface (six conductor) cable. The pin numbering for the
connector is shown from the bottom of the target PC board in Figure 2-3.
Note:
Cable connections at the debugger and target are mirror images of each
other, i.e., pin 1 on one end of the cable is connected to pin 6 on the other
end of the cable. See Section A.6.2.3 “Modular Cable Specification”.
FIGURE 2-3:
STANDARD RJ-11 CONNECTION AT TARGET
Target
Connector
VDD
VPP/MCLR
2.4.2
PGD
LVP
2 4 6
PGC
1 3 5
Target
Vss
PC Board
Bottom Side
Target Connection Circuitry
Figure 2-4 shows the interconnections of the PICkit 3 programmer/debugger to the
connector on the target board. The diagram also shows the wiring from the connector
to a device on the target PC board. A pull-up resistor (usually around 10 k) is
recommended to be connected from the VPP/MCLR line to VDD so that the line may be
strobed low to reset the device.
2010 Microchip Technology Inc.
DS51795B-page 19
PICkit™ 3 User’s Guide
FIGURE 2-4:
STANDARD CONNECTION TARGET CIRCUITRY
User Reset
Application
PC Board
VDD
Device
2
4.7K-10K
VPP/MCLR
PGC
AVDD
AVSS
2.4.3
1
5
PGD
4
VSS
3
Interface
Connector
Target Powered
In the following descriptions, only three lines are active and relevant to core debugger
operation: pins 1 (VPP/MCLR), 5 (PGC) and 4 (PGD). Pins 2 (VDD) and 3 (VSS) are
shown on Figure 2-4 for completeness. PICkit 3 has two configurations for powering
the target device: internal debugger and external target power.
The recommended source of power is external and derived from the target application.
In this configuration, target VDD is sensed by the debugger to allow level translation for
the target low voltage operation. If the debugger does not sense voltage on its VDD line
(pin 2 of the interface connector), it will not operate.
2.4.4
Debugger Powered
The internal debugger power is limited to 30 mA. This may be of benefit for very small
applications that have the device VDD separated from the rest of the application circuit
for independent programming, but is not recommended for general usage as it imposes
more current demands from the USB power system derived from the PC.
Not all devices have the AVDD and AVSS lines, but if they are present on the target
device, all must be connected to the appropriate levels in order for the debugger to
operate. They cannot be left floating.
Also, devices with a VCAP line (PIC18FXXJ for example) should be connected to the
appropriate capacitor or level.
Note:
DS51795B-page 20
The interconnection is very simple. Any problems experienced are often
caused by other connections or components on these critical lines that
interfere with the operation of the PICkit 3 programmer/debugger, as
discussed in the following section.
2010 Microchip Technology Inc.
Theory of Operation
2.4.5
Circuits That Will Prevent the Debugger From Functioning
Figure 2-5 shows the active debugger lines with some components that will prevent the
PICkit 3 debugger system from functioning.
FIGURE 2-5:
IMPROPER CIRCUIT COMPONENTS
1
VPP/MCLR
No!
No!
No!
PGC
5
4
PGD
No!
Interface
Connector
Specifically, these guidelines must be followed:
• Do not use pull-ups on PGC/PGD – they will disrupt the voltage levels, since
these lines have 4.7 k pull-down resistors in the debugger.
• Do not use capacitors on PGC/PGD – they will prevent fast transitions on data
and clock lines during programming and debug communications.
• Do not use capacitors on MCLR – they will prevent fast transitions of VPP. A
simple pull-up resistor is generally sufficient.
• Do not use diodes on PGC/PGD – they will prevent bidirectional communication
between the debugger and the target device.
2.5
DEBUGGING
There are two steps to using the PICkit 3 programmer/debugger system as a debugger.
The first requires that an application be programmed into the target device (usually with
the PICkit 3 itself). The second uses the internal in-circuit debug hardware of the target
Flash device to run and test the application program. These two steps are directly
related to the MPLAB IDE operations:
1. Program the code into the target and activate special debug functions (see the
next section for details).
2. Use the debugger to set breakpoints and run.
If the target device cannot be programmed correctly, the PICkit 3
programmer/debugger will not be able to debug.
Figure 2-6 shows the basic interconnections required for programming. Note that this
is the same as Figure 2-4, but for the sake of clarity, the VDD and VSS lines from the
debugger are not shown.
2010 Microchip Technology Inc.
DS51795B-page 21
PICkit™ 3 User’s Guide
FIGURE 2-6:
PROPER CONNECTIONS FOR PROGRAMMING
+5V
VDD
Programming
Voltage
1
Internal Circuits
4.7 k
5
4
VPP/MCLR
PGC
PGD
4.7 k
VSS
A simplified diagram of some of the internal interface circuitry of the PICkit 3
programmer/debugger is shown. For programming, no clock is needed on the target
device, but power must be supplied. When programming, the debugger puts
programming levels on VPP/MCLR, sends clock pulses on PGC and serial data via
PGD. To verify that the part has been programmed correctly, clocks are sent to PGC
and data is read back from PGD. This conforms to the ICSP protocol of the device
under development.
2.6
REQUIREMENTS FOR DEBUGGING
To debug (set breakpoints, see registers, etc.) with the PICkit 3 programmer/debugger
system, there are critical elements that must be working correctly:
• The debugger must be connected to a PC. It must be powered by the PC via the
USB cable, and it must be communicating with the MPLAB IDE software via the
USB cable. See Chapter 3. “Installation” for details.
• The debugger must be connected as shown to the VPP, PGC and PGD pins of the
target device with the modular interface cable (or equivalent). VSS and VDD are
also required to be connected between the debugger and target device.
• The target device must have power and a functional, running oscillator. If the
target device does not run, for any reason, the PICkit 3 programmer/debugger
cannot debug.
• The target device must have its Configuration Words programmed correctly:
- The oscillator Configuration bits should correspond to RC, XT, etc., depending
upon the target design.
- For some devices, the Watchdog Timer is enabled by default and needs to be
disabled.
- The target device must not have code protection enabled.
- The target device must not have table read protection enabled.
• PGM (LVP) should be disabled.
Once the above conditions are met, you may proceed to the following:
• Sequence of Operations Leading to Debugging
• Debugging Details
DS51795B-page 22
2010 Microchip Technology Inc.
Theory of Operation
2.6.1
Sequence of Operations Leading to Debugging
Given that the requirements for debugging (see previous section) are met, these
actions can be performed when the PICkit 3 programmer/debugger is set as the current
debugger from the MPLAB IDE menu (Debugger>Select Tool>PICkit 3):
• The application code is compiled/assembled by selecting Project>Build
Configuration>Debug.
• When Debugger>Program is selected, the application code is programmed into
the device’s memory via the ICSP protocol as described above.
• A small “debug executive” program is loaded into the high area of program
memory of the target device automatically by MPLAB IDE. Since the debug
executive must reside in program memory, the application program must not use
this reserved space. Some devices have special memory areas dedicated to the
debug executive. Check your device data sheet for details.
• Special “in-circuit debug” registers in the target device are enabled. These allow
the debug executive to be activated by the debugger.
• The target device is held in Reset by keeping the VPP/MCLR line low.
2.6.2
Debugging Details
Figure 2-7 illustrates the PICkit 3 programmer/debugger system when it is ready for
debugging.
FIGURE 2-7:
PICkit™ 3 DEBUGGER READY FOR DEBUGGING
VDD
+12V
+5V
1
VPP/MCLR
Internal Circuits
4.7 k
4.7 k
Internal
Debug
Registers
Debug
Executive
PGC
5
Program
Memory
4
Target
must
be
Running
for Debug
Executive
to Function
Area
Reserved
for Debug
Executive
PGD
Hardware
Stack Shared
by Debug Exec
Area Used by
Debug Exec
File
Registers
Typically, in order to find out if an application program will run correctly, a breakpoint is
set early in the program code. When a breakpoint is set from the user interface of
MPLAB IDE, the address of the breakpoint is stored in the special internal debug
registers of the target device. Commands on PGC and PGD communicate directly to
these registers to set the breakpoint address.
Next, the Debugger>Run function or the Run icon (forward arrow) is usually pressed
from MPLAB IDE. The debugger will then tell the debug executive to run. The target
will start from the Reset vector and execute until the Program Counter reaches the
breakpoint address previously stored in the internal debug registers.
After the instruction at the breakpoint address is executed, the in-circuit debug
mechanism of the target device “fires” and transfers the device’s Program Counter to
the debug executive (much like an interrupt) and the user’s application is effectively
2010 Microchip Technology Inc.
DS51795B-page 23
PICkit™ 3 User’s Guide
halted. The debugger communicates with the debug executive via PGC and PGD, gets
the breakpoint status information and sends it back to MPLAB IDE. MPLAB IDE then
sends a series of queries to the debugger to get information about the target device,
such as file register contents and the state of the CPU. These queries are ultimately
performed by the debug executive.
The debug executive runs just like an application in program memory. It uses some
locations on the stack for its temporary variables. If the device does not run, for
whatever reason, such as no oscillator, a faulty power supply connection, shorts on the
target board, etc., then the debug executive cannot communicate to the PICkit 3
programmer/debugger and MPLAB IDE will issue an error message.
Another way to get a breakpoint is to press the MPLAB IDE’s Halt button (the “pause”
symbol to the right of the Run arrow). This toggles the PGC and PGD lines so that the
in-circuit debug mechanism of the target device switches the Program Counter from the
user’s code in program memory to the debug executive. Again, the target application
program is effectively halted, and MPLAB IDE uses the debugger communications with
the debug executive to interrogate the state of the target device.
2.7
PROGRAMMING
There are three ways to program a device with the PICkit 3 unit:
• Through MPLAB IDE with the PICkit 3 connected to the PC.
• Through PICkit 3 Programmer-To-Go, after setting it up through MPLAB IDE. (See
Chapter 6. “PICkit 3 Programmer-To-Go” for more information.)
• Through PICkit 3 Programmer Application, a software program that allows you to
program devices with PICkit 3 without using MPLAB IDE. (See “PICkit™ 3
Programmer Application User’s Guide” for instructions.)
Use the PICkit 3 programmer/debugger as a programmer to program an actual (non
-ICE/-ICD) device, i.e., a device not on a header board. From the MPLAB IDE menu,
select “PICkit 3” from Programmer>Select Programmer and compile/assemble your
application code with the “Build Configuration” list box on the MPLAB IDE toolbar set
to “Release”. Also, it may be set by selecting Project>Build Configuration>Release.
All debug features are turned off or removed when the debugger is used as a
programmer. When using the Programmer>Program selection to program a device,
MPLAB IDE will disable the in-circuit debug registers so the PICkit 3
programmer/debugger will program only the target application code and the
Configuration bits (and EEPROM data, if available and selected) into the target device.
The debug executive will not be loaded. As a programmer, the debugger can only
toggle the MCLR line to reset and start the target. A breakpoint cannot be set, and
register contents cannot be seen or altered.
The PICkit 3 programmer/debugger system programs the target using ICSP. VPP, PGC
and PGD lines should be connected as described previously. No clock is required while
programming, and all modes of the processor can be programmed, including code
protection, Watchdog Timer and table read protection.
2.8
RESOURCES USED BY THE DEBUGGER
For a complete list of resources used by the debugger for your device, please see the
online help file in MPLAB IDE for the PICkit 3 programmer/debugger.
DS51795B-page 24
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 3. Installation
3.1
INTRODUCTION
How to install the PICkit 3 programmer/debugger system is discussed.
•
•
•
•
3.2
Installing the Software
Connecting the Target
Setting Up the Target Board
Setting Up MPLAB® IDE
INSTALLING THE SOFTWARE
To install the MPLAB IDE software, first acquire the latest MPLAB IDE installation
executable (MPxxxxx.exe, where xxxxx represents the version of MPLAB IDE) from
either the Microchip web site (www.microchip.com) or the MPLAB IDE CD-ROM
(DS51123). Then run the executable and follow the screens to install MPLAB IDE.
Note:
3.3
MPLAB IDE v8.20 or greater is required to use the PICkit 3
programmer/debugger.
CONNECTING THE TARGET
A connection is built-in to select the type of communication with the target. See
Section 2.3 “Debugger to Target Communication” for more details and a diagram.
1. Plug in the USB/power cable if not already connected.
2. Attach the communication cable(s) between debugger and target if using RJ11
plug or connect directly to a 6-pin inline header.
FIGURE 3-1:
INSERT COMMUNICATIONS AND USB/POWER CABLES
PICkit™ 3
1
USB Cable to PC
2010 Microchip Technology Inc.
2
To Target Board
or Header
DS51795B-page 25
PICkit™ 3 User’s Guide
3.4
SETTING UP THE TARGET BOARD
3.4.1
Using Production Devices
For production devices, the debugger may be connected directly to the target board.
The device on the target board must have built-in debug circuitry in order for the
PICkit 3 programmer/debugger to perform emulation with it. Consult the device data
sheet to see if the device has the needed debug circuitry, i.e., it should have a
“Background Debugger Enable” Configuration bit.
Note:
In the future, devices with circuitry that support ICD may be used.
The target board must have a connector to accommodate the communications chosen
for the debugger. For connection information, see Section 2.3 “Debugger to Target
Communication”, “Standard ICSP Device Communication”.
3.4.2
Using ICE Devices
For ICE devices, an ICE header board is required. The header board contains the
hardware necessary to emulate a specific device or family of devices. For more
information on ICE headers, see the “Header Board Specification” (DS51292).
Note:
In the future, ICD header boards with ICD devices (Device-ICD) may be
used.
A transition socket is used with the ICE header to connect the header to the target
board. Transition sockets are available in various styles to allow a common header to
be connected to one of the supported surface mount package styles. For more
information on transition sockets, see the “Transition Socket Specification” (DS51194).
Header board layout will be different for headers or processor extension packs. For
connection information, see Section 2.3 “Debugger to Target Communication”,
“Standard ICSP Device Communication”.
3.4.3
Using an ICD Header
All Baseline and some Mid-Range PIC microcontrollers require a special –ICD device
mounted on a debug header circuit board to enable the debugging feature. For a list of
these devices and the required ICD header board part number, please see the “Header
Board Specification” (DS51292). The Header Board Specification is included on the
PICkit 3 CD-ROM, and is available online at www.microchip.com.
Each ICD header board comes with the necessary –ICD device, and is used on the
target board instead of the production microcontroller. However, most header boards
have an RJ-11 debug connector which requires the AC164110 RJ-11 to ICSP adapter
kit to connect it to PICkit 3. Figure 3-2 illustrates using the AC162061 ICD Header for
the PIC18F45K20 with the AC164110 adapter kit and Low Pin Count Demo Board.
DS51795B-page 26
2010 Microchip Technology Inc.
Installation
FIGURE 3-2:
USING AN ICD HEADER BOARD
Many Mid-Range PIC microcontrollers and all PIC18 and 16-bit PIC microcontroller
devices do not require an ICD header and can be debugged directly through the ICSP
programming connections.
3.4.4
Powering the Target
These are configuration essentials:
• When using the USB connection, PICkit 3 can be powered from the PC but it can
only provide a limited amount of current, up to 30 mA, at VDD from 1.8-5V to a
small target board.
• The desired method is for the target to provide VDD since it can provide a higher
current. The additional benefit is that plug-and-play target detection facility is
inherited, i.e., MPLAB IDE will let you know in the Output window when it has
detected the target and has detected the device.
Note:
The target voltage is only used for powering up the drivers for the ICSP
interface; the target voltage does not power up the PICkit 3. The PICkit 3
power is derived strictly from the USB port.
If you have not already done so, connect the PICkit 3 to the target using the appropriate
cables (see Section 3.3 “Connecting the Target”). Then power the target. If you are
powering the target through the PICkit 3, see Section 10.5.8 “Settings Dialog, Power
Tab” for instructions.
3.5
SETTING UP MPLAB® IDE
Once the hardware is connected and powered, MPLAB IDE may be set up for use with
the PICkit 3 programmer/debugger.
On some devices, you must select the communications channel in the Configuration
bits, e.g., PGC1/EMUC1 and PGD1/EMUD1. Make sure the pins selected here are the
same ones physically connected to the device.
For more on setting up a project and getting started with PICkit 3, see Chapter
4. “General Setup”.
2010 Microchip Technology Inc.
DS51795B-page 27
PICkit™ 3 User’s Guide
NOTES:
DS51795B-page 28
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 4. General Setup
4.1
INTRODUCTION
How to get started using the PICkit 3 programmer/debugger is discussed.
•
•
•
•
•
•
•
4.2
Starting the MPLAB IDE Software
Creating a Project
Viewing the Project
Building the Project
Setting Configuration Bits
Setting the Debugger or Programmer
Debugger/Programmer Limitations
STARTING THE MPLAB IDE SOFTWARE
After installing the MPLAB IDE software (Section 3.2 “Installing the Software”),
invoke it by using any of these methods:
• Select Start>Programs>Microchip>MPLAB IDE vx.xx>MPLAB IDE, where vx.xx is
the version number.
• Double click the MPLAB IDE desktop icon.
• Execute the file mplab.exe in the mplab ide\core subdirectory of the MPLAB
IDE installation directory.
For more information on using the software, see:
• “MPLAB® IDE User's Guide” (DS51519) – Comprehensive guide for using
MPLAB IDE.
• The online help files – The most up-to-date information on MPLAB IDE and
PICkit 3 programmer/debugger.
• Readme files – Last minute information on each release is included in Readme
for MPLAB IDE.txt and Readme for PICkit 3 Debugger.txt. Both files
are found in the Readmes subdirectory of the MPLAB IDE installation directory.
4.3
CREATING A PROJECT
The easiest way to create a new project is to select Project>Project Wizard. With the
help of the Project Wizard, a new project and the language tools for building that project
can be created. The wizard will guide you through the process of adding source files,
libraries, etc., to the various “nodes” on the Project window. See MPLAB IDE
documentation for more detail on using this wizard. The basic steps are provided here:
•
•
•
•
Select your device (e.g., PIC18F45K20)
Select a language toolsuite (e.g., Microchip C Compiler Toolsuite)
Name the project
Add application files (e.g., program.c, support.s, counter.asm)
Note:
2010 Microchip Technology Inc.
If you do not have a custom linker script in your project, the Project
Manager will select the appropriate linker script for you.
DS51795B-page 29
PICkit™ 3 User’s Guide
4.4
VIEWING THE PROJECT
After the Project Wizard has created a project, the project and its associated files are
visible in the Project window. Right click on any line in the Project window tree to pop
up a menu with additional options for adding and removing files.
See MPLAB IDE documentation for more detail on using the Project window.
4.5
BUILDING THE PROJECT
After the project is created, the application needs to be built. This will create object
(hex) code for the application that can be programmed into the target by the PICkit 3
programmer/debugger.
To set build options, select Project>Build Options>Project.
Note:
On the Project Manager toolbar (View>Toolbars>Project Manager), select
“Debug” from the drop-down list when using the PICkit 3 as a debugger, or
select “Release” when using it as a programmer.
When done, choose Project>Build All to build the project.
4.6
SETTING CONFIGURATION BITS
Although device Configuration bits may be set in code, they also may be set in the
MPLAB IDE Configuration window. Select Configure>Configuration Bits. By clicking on
the text in the “Settings” column, these can be changed.
Some Configuration bits of interest are:
• Watchdog Timer Enable – On most devices, the Watchdog Timer is enabled
initially. It is usually a good idea to disable this bit.
• Comm Channel Select – For some devices, you will need to select the communications channel for the device, e.g., PGC1/EMUC1 and PGD1/EMUD1. Make
sure the pins selected here are the same ones physically connected to the device.
• Oscillator – Select the configuration setting that matches the target oscillator.
4.7
SETTING THE DEBUGGER OR PROGRAMMER
Select Debugger>Select Tool>PICkit 3 to choose the PICkit 3 programmer/debugger
as the debug tool. The Debugger menu and MPLAB IDE toolbar will change to display
debug options once the tool is selected. Also, the Output window will open and
messages concerning PICkit 3 status and communications will be displayed on the
PICkit 3 tab. For more information, see Section 10.2 “Debugging Functions” and
Section 10.3 “Debugging Dialogs/Windows”.
Select Programmer>Select Programmer>PICkit 3 to choose the PICkit 3
programmer/debugger as the programmer tool. The Programmer menu and MPLAB
IDE toolbar will change to display programmer options once the tool is selected. Also,
the Output window will open and messages concerning ICE status and
communications will be displayed on the PICkit 3 tab. For more information, see
Section 10.4 “Programming Functions”.
Select Debugger>Settings or Programmer>Settings to open the Settings dialog
(Section 10.5 “Settings Dialog”) and set up options as needed.
If errors occurs, see:
• Chapter 9. “Error Messages”
• Chapter 8. “Frequently Asked Questions (FAQs)”
DS51795B-page 30
2010 Microchip Technology Inc.
General Setup
4.8
DEBUGGER/PROGRAMMER LIMITATIONS
For a complete list of debugger limitations for your device, please see the PICkit 3
online help file in MPLAB IDE by selecting Help>Topics>PICkit 3 and click OK.
2010 Microchip Technology Inc.
DS51795B-page 31
PICkit™ 3 User’s Guide
NOTES:
DS51795B-page 32
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 5. PICkit 3 Debug Express
5.1
INTRODUCTION
The PICkit 3 Debug Express kit works in conjunction with the MPLAB IDE application
to run, stop and single-step through programs. One or more breakpoints can be set and
the processor can be reset. Once the processor is stopped, the register’s contents can
be examined and modified.
For more information on how to use MPLAB IDE, reference the following
documentation:
• MPLAB® IDE User’s Guide (DS51519)
• MPLAB® IDE Online Help
5.2
PICkit 3 DEBUG EXPRESS KIT CONTENTS
The PICkit 3 Debug Express kit (DV164131) contains the following items:
1.
2.
3.
4.
5.
The PICkit 3 Development Programmer/Debugger
USB cable
44-Pin Demo Board with device*
MPLAB IDE CD-ROM
PICkit 3 Debug Express C18 Lessons (tutorials) on CD-ROM
* The Explorer 16 board may also be used to debug.
5.3
INSTALLING THE HARDWARE AND SOFTWARE
Install the PICkit 3 hardware and software, if not already done, as specified in
Chapter 3. “Installation”.
Note:
5.3.1
PICkit 3 Debug Express requires MPLAB IDE version 8.20 or later.
Reserved Resources
Due to the built-in in-circuit debugging capability of ICD devices and the ICSP function
offered by the debugger, the PICkit 3 Debug Express uses some on-chip resources
when debugging.
For information on device resources that are needed for in-circuit debugging, please
refer to the MPLAB PICkit 3 Help, found in the MPLAB IDE under Help>Topics. The
device reserved resource information found under “Resources Used By MPLAB
PICkit 3” is the same for the PICkit 3 Debug Express.
5.3.2
Connecting the Demo Board
The PIC18F45K20 included on the 44-Pin Demo Board can be debugged by simply
connecting the demo board to the PICkit 3 as shown in Figure 5-1.
2010 Microchip Technology Inc.
DS51795B-page 33
PICkit™ 3 User’s Guide
FIGURE 5-1:
5.3.3
CONNECTING THE DEMO BOARD TO THE PICkit™ 3
Configuration Bits and Debug Express
PIC microcontroller devices that do not require an ICD Header and may be debugged
directly contain a DEBUG bit in the Configuration Word(s) that enables and disables
the Debug mode on the PIC microcontroller.
This bit is automatically set appropriately by the MPLAB IDE when using PICkit 3
Debug Express and should not be specified in source code configuration settings.
CAUTION
The DEBUG configuration bit value should not be specified in source code Configuration settings under normal conditions. Doing so may cause the bit to be asserted when
programming a device outside the debugger. This will cause the device to function
improperly or not all at in the application circuit.
Many 16-bit PIC microcontroller devices such as PIC24 and dsPIC33 families have
multiple ICSP programming and debugging port pins labeled PGC1/EMUC1 and
PGD1/EMUD1, PGC2/EMUC2 and PGD2/EMUD2, etc. While any ICSP port may be
used for programming, only one port is active at a time for debugging. The active EMU
port is set in the device Configuration bits. If the active port setting does not match the
EMU port to which the PICkit 3 is connected, the device will be unable to enter debug
mode. In the MPLAB IDE Configuration Bits dialog, these bits are usually referred to as
the “Comm Channel Select” bits.
DS51795B-page 34
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 6. PICkit 3 Programmer-To-Go
6.1
INTRODUCTION
The PICkit 3 Programmer-To-Go functionality allows a PIC MCU memory image to be
downloaded into the PICkit 3 for later programming into a specific PIC MCU. No
software or PC is required to program devices once the PICkit 3 programmer is set up
for Programming-To-Go. A USB power source for the PICkit 3 is all that is needed.
Note:
Although the PICkit 3 unit is capable of programming and debugging, when
using the Programming-To-Go feature, you can only program. No
debugging capabilities are available with Programming-To-Go.
Topics discussed in this section are:
•
•
•
•
•
6.2
USB Power for PICkit 3 Programmer-To-Go
PICkit 3 Programmer-To-Go Supported Devices
Setting up PICkit 3 for Programmer-To-Go Operation
Using PICkit 3 Programmer-To-Go
Exiting Programmer-To-Go Mode
USB POWER FOR PICkit 3 PROGRAMMER-TO-GO
The PICkit 3 programmer hardware does not have the capability to be powered in its
entirety by the target through the ICSP connector VDD pin. Therefore, it must be
powered by a 5V power supply through the USB mini-B port at the top of the PICkit 3
unit. There are several options for providing power, such as, using:
• Any available PC USB port or USB hub port. (No USB communication is
necessary; it is only used to provide power.)
• A USB host port on a portable device.
• A USB power adapter or charger with a USB mini-B connector, either from an
automotive power jack or an AC wall plug.
• A portable battery charge or power source for cell phones or other portable
devices with USB mini-B connector.
• A custom battery pack that supplies regulated 5V into the PICkit 3 USB port.
6.2.1
Power Requirements
The USB power source used should meet the following minimum criteria:
• Is able to supply at least 100mA of current to the PICkit 3 unit.
• Provides a steady, regulated 4.5V to 5.5V output.
Note 1:
2:
2010 Microchip Technology Inc.
Most portable chargers/power devices with their own batteries will not
give an indication when their internal battery voltage gets low and the output drops below 4.5V. Therefore, you must be sure the device’s battery
has sufficient remaining capacity to power the PICkit 3 above 4.5V.
Any battery-based power sources should be disconnected from the
PICkit 3 unit when it is not in use. Otherwise, the PICkit 3 unit will drain
the power source battery.
DS51795B-page 35
PICkit™ 3 User’s Guide
6.3
PICkit 3 PROGRAMMER-TO-GO SUPPORTED DEVICES
All devices in the following families supported by the PICkit 3 with MPLAB IDE are
supported for the Programmer-To-Go operation. Table 6-1 lists supported device
families and program memory limitations.
TABLE 6-1:
Note 1:
DS51795B-page 36
PROGRAMMER-TO-GO SUPPORTED DEVICES
Supported Families
Supported Parts
Baseline
All1
Mid-range
All1
PIC18F
All1
PIC18 J-Series
All1
PIC18 K-Series
All1
PIC24
All1,2
dsPIC33
All1,2
dsPIC30
All1
dsPIC30 SMPS
All1
PIC32MX
All3
Supports all family parts that are supported by MPLAB IDE. See menu
Help > ReadMe for a list of parts supported by the application. Large
memory parts are supported.
2:
PICkit 3 Programmer-To-Go does not support using the Programming
Executive (Enhanced ICSP) for these devices. When using PICkit 3
Programmer-To-Go with these parts they will be programmed using low
level ICSP methods.
3:
Supported by MPLAB IDE v8.53 or greater.
2010 Microchip Technology Inc.
PICkit 3 Programmer-To-Go
6.4
SETTING UP PICkit 3 FOR PROGRAMMER-TO-GO OPERATION
Before downloading a memory image to PICkit 3 for Programmer-To-Go operation, the
PICkit 3 programmer software options and buffers should be set up as desired during
Programmer-To-Go operation. In fact, it is highly recommended to test programming a
target device from the software first, with all desired options, to ensure the device
programs as expected before downloading an image to Programmer-To-Go. Refer to
Chapter 4. “General Setup” for information on using MPLAB IDE and PICkit 3 to
program a device.
6.4.1
PICkit 3 Settings, Programmer to go Tab
From MPLAB IDE, select Programmer>Programmer to go Tab (Figure 6-1).
FIGURE 6-1:
PICkit 3 PROGRAMMER TO GO TAB
• In the “Image Name” field, type in the name you want to use for your programming
image.
• The “Programmer Setting Report” panel displays the setting you’ve selected for
programming the device. If you want to change any of these settings, use the
appropriate tab in the PICkit 3 Settings dialog.
• Click Send Image In Memory to execute an image transfer to the PICkit 3 unit.
Once the image is stored in the PICkit 3, you no longer need MPLAB IDE or a PC
to program a device. You can take the PICkit 3 to other locations that may not
have a computer and program a device with the push of a button.
6.4.2
Download to PICkit 3 Complete
After you click Send Image In Memory, the Output window displays a message
(Figure 6-2) when the download is complete. The PICkit 3 unit’s “Active” LED should
be blinking to indicate it is in Programmer-To-Go mode and ready to program.
2010 Microchip Technology Inc.
DS51795B-page 37
PICkit™ 3 User’s Guide
FIGURE 6-2:
DOWNLOAD COMPLETE
Disconnect the PICkit 3 from the PC USB port. When any USB power source is applied,
the PICkit 3 unit will power-up in Programmer-To-Go mode, indicated by the blinking
“Active” LED.
6.5
USING PICkit 3 PROGRAMMER-TO-GO
To use PICkit 3 Programmer-To-Go to program a target device once it has been set up,
follow the steps below.
1. Connect a USB power source as discussed in Section 6.2 “USB Power for
PICkit 3 Programmer-To-Go” to the PICkit 3 unit.
2. Ensure the PICkit 3 “Power” LED is lit. The “Active” LED blinks once to indicate
the unit is in Programmer-To-Go mode and ready to program.
3. Connect the PICkit 3 unit ICSP connector to the target. Ensure the target is
powered properly if not powering from PICkit 3.
4. Press the PICkit 3 push button to begin programming.
During the programming operation the PICkit 3 “Status” LED will turn orange and
remain lit continuously while the operation takes place.
When the programming operation is complete, the PICkit 3 unit will provide feedback
on the operation via the unit LEDs. A green “Status” LED indicates a successful
operation. Red indicates a programming failure. See Table 6-2 for the feedback codes.
DS51795B-page 38
2010 Microchip Technology Inc.
PICkit 3 Programmer-To-Go
TABLE 6-2:
PROGRAMMER-TO-GO OPERATION FEEDBACK CODES
LED Status
Active LED
Status LED
Interpretation
Code
Description
Single Blink
(Blue)
Green
Success/Ready
No errors were encountered during the programming operation.
PICkit 3 Programmer-To-Go is
ready to program again.
Off
Red – Continuous
Rapid Blinking:
••••••••......
VDD/VPP Error
PICkit 3 was unable to set the
VDD or VPP voltage to the
expected value. If PICkit 3 is not
providing VDD, then the error
must be a VPP error. See
(Section 2.4 “Communication
Connections” and
Section 3.4.4 “Powering the
Target”) for VDD and VPP information.
Off
Red – 2 blinks in
succession:
•• •• •• ••.......
Device ID Error
PICkit 3 received an unexpected
Device ID from the target. Ensure
the target part matches that
selected when the PICkit 3 Programmer-To-Go was set up. May
indicate a bad ICSP connection
preventing the PICkit 3 from communicating with the target. Not
applicable to Baseline devices.
Off
Red – 3 blinks in
succession:
••• ••• •••......
Verify Error
The target did not Verify successfully after programming. Ensure
the target VDD meets the minimum required. With Baseline
devices, this error may indicate
ICSP communication problems.
Off
Red – 4 blinks in
succession:
•••• ••••......
Internal Error
An unexpected internal Programmer-To-Go error occurred. If it
happens a second time, try
downloading to the PICkit 3
again.
Note:
2010 Microchip Technology Inc.
Press the PICkit 3 push button to clear the error code and initiate a new
programming operation.
DS51795B-page 39
PICkit™ 3 User’s Guide
6.6
EXITING PROGRAMMER-TO-GO MODE
To exit from Programmer-To-Go mode, plug the PICkit 3 unit into a PC USB port and
connect to MPLAB IDE. The following message displays these choices:
FIGURE 6-3:
EXITING PROGRAMMER-TO-GO MODE
Click Yes to preserve the image or No to erase the image. If you select No, the Output
window displays a message similar to Figure 6-4 and exits Programmer-To-Go mode.
FIGURE 6-4:
DS51795B-page 40
EXITING MESSAGE IN OUTPUT WINDOW
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Part 2 – Troubleshooting
Chapter 7. Troubleshooting First Steps ..................................................................... 43
Chapter 8. Frequently Asked Questions (FAQs) ....................................................... 45
Chapter 9. Error Messages.......................................................................................... 49
2010 Microchip Technology Inc.
DS51795B-page 41
PICkit™ 3 User’s Guide
NOTES:
DS51795B-page 42
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 7. Troubleshooting First Steps
7.1
INTRODUCTION
If you are having problems with PICkit 3 programmer/debugger operation, start here.
• The 5 Questions to Answer First
• Top 10 Reasons Why You Can’t Debug
• Other Things to Consider
7.2
THE 5 QUESTIONS TO ANSWER FIRST
1. What device are you working with? Often an upgrade to a newer version of
MPLAB IDE is required to support newer devices. That is, yellow light = untested
support.
2. Are you using a Microchip demo board or one of your own design? Have you followed the guidelines for resistors/capacitors for communications connections?
See Chapter 2. “Theory of Operation”.
3. Have you powered the target? The debugger cannot power the target if greater
than 30 mA.
4. Are you using a USB hub in your set up? Is it powered? If you continue to have
problems, try using the debugger without the hub (plugged directly into the PC.)
5. Are you using the standard communication cable (RJ-11) shipped with the
debugger? If you have made a longer cable, it can cause communications errors.
7.3
TOP 10 REASONS WHY YOU CAN’T DEBUG
1. The oscillator is not working. Check your Configuration bits setting for the
oscillator.
2. The target board is not powered. Check the power cable connection.
3. The debugger has become physically disconnected from the PC and/or the target board. Check the communications cables’ connections.
4. The device is code-protected. Check your Configuration bit’s setting for code
protection.
5. You are trying to rebuild the project while in Release mode. Select Debug in the
Build Configuration drop-down list on the project toolbar, then rebuild the project.
6. The debugger is selected as a programmer, and not as a debugger, in MPLAB
IDE.
7. The debugger to PC communications has been interrupted. Reconnect to the
debugger in MPLAB IDE.
8. The target application has become corrupted or contains errors.Try rebuilding
and reprogramming the target application. Then initiate a Power-on Reset of the
target.
9. Other configuration settings are interfering with debugging. Any configuration
setting that would prevent the target from executing code will also prevent the
debugger from putting the code into Debug mode.
10. The debugger cannot always perform the action requested. For example, the
debugger cannot set a breakpoint if the target application is currently running.
2010 Microchip Technology Inc.
DS51795B-page 43
PICkit™ 3 User’s Guide
7.4
OTHER THINGS TO CONSIDER
1. It is possible the error was a one-time glitch. Try the operation again.
2. There may be a problem programming in general. As a test, switch to programmer mode and program the target with the simplest application possible (e.g., a
program to blink an LED). If the program will not run, then you know that
something is wrong with the target setup.
3. It is possible that the target device has been damaged in some way (e.g., over
current.) Development environments are notoriously hostile to components.
Consider trying another target device.
4. Microchip Technology Inc. offers demonstration boards to support most of its
microcontrollers. Consider using one of these applications, which are known to
work, to verify correct PICkit 3 programmer/debugger functionality.
5. Review debugger debug operation to ensure proper application setup (Chapter
2. “Theory of Operation”.)
6. If the problem persists contact Microchip.
DS51795B-page 44
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 8. Frequently Asked Questions (FAQs)
8.1
INTRODUCTION
Look here for answers to frequently asked questions about the PICkit 3
programmer/debugger system.
• How Does It Work
• What’s Wrong
8.2
HOW DOES IT WORK
• What's in the silicon that allows it to communicate with the PICkit 3
programmer/debugger?
The PICkit 3 programmer/debugger can communicate with Flash silicon via the
ICSP interface. It uses the debug executive downloaded into program or test
memory.
• How is the throughput of the processor affected by having to run the debug
executive?
The debug executive doesn’t run while in Run mode, so there is no throughput
reduction when running your code, i.e., the debugger doesn’t ‘steal’ any cycles
from the target device.
• How does the PICkit 3 programmer/debugger compare with other in-circuit
emulators/debuggers?
Please refer to Section 2.2 “PICkit 3 vs. PICkit 2”.
• On the MPLAB ICE 2000/4000 debuggers, the data must come out on the
bus in order to perform a complex trigger on that data. Is this also required
on the PICkit 3 programmer/debugger? For example, could I halt based on a
flag going high?
The MPLAB ICE 2000/4000 debuggers use a special debugger chip (-ME) for
monitoring. There is no -ME with the PICkit 3 programmer/debugger so there are
no busses to monitor externally. With the PICkit 3 programmer/debugger, rather
than using external breakpoints, the built-in breakpoint circuitry of the debug
engine is used – the busses and breakpoint logic are monitored inside the part.
• Does the PICkit 3 programmer/debugger have complex breakpoints like
MPLAB ICE 2000/4000?
No. But you can break based on a value in a data memory location or program
address. See Section 10.3.1 “Breakpoints Dialog” for more information.
• Is the PICkit 3 optoisolated or electrically isolated?
No. You cannot apply a floating or high voltage (120V) to the current system.
• What limitations are there with the standard cable?
The standard ICSP RJ-11 cable does not allow for clock speeds greater than
about 15 Mbps.
2010 Microchip Technology Inc.
DS51795B-page 45
PICkit™ 3 User’s Guide
• Will the PICkit 3 slow down the running of the program?
No, the device will run at any device speed as specified in the data sheet.
• Is it possible to debug a dsPIC DSC running at any speed?
The PICkit 3 is capable of debugging at any device speed as specified in the
device’s data sheet.
• What is the function of pin 6, the LVP pin?
Pin 6 is reserved for the LVP (Low-Voltage Programming) connection.
8.3
WHAT’S WRONG
• My PC went into power-down/hibernate mode, and now my debugger won’t
work. What happened?
When using the debugger for prolonged periods of time, and especially as a
debugger, be sure to disable the Hibernate mode in the Power Options Dialog
window of your PC’s operating system. Go to the Hibernate tab and clear or
uncheck the “Enable hibernation” check box. This will ensure that all
communication is maintained across all the USB subsystem components.
• I set my peripheral to NOT freeze on halt, but it is suddenly freezing. What's
going on?
For dsPIC30F/33F and PIC24F/H devices, a reserved bit in the peripheral control
register (usually either bit 14 or 5) is used as a Freeze bit by the debugger. If you
have performed a write to the entire register, you may have overwritten this bit.
(The bit is user-accessible in Debug mode.)
To avoid this problem, write only to the bits you wish to change for your application
(BTS, BTC) instead of to the entire register (MOV).
• When using a 16-bit device, an unexpected Reset occurred. How do I
determine what caused it?
Some things to consider:
- To determine a Reset source, check the RCON register.
- Handle traps/interrupts in an Interrupt Service Routine (ISR). You should
include trap.c style code, i.e.,
void __attribute__((__interrupt__))
:
void __attribute__((__interrupt__))
:
void __attribute__((__interrupt__))
{
INTCON1bits.OSCFAIL = 0;
while (1);
}
:
void __attribute__((__interrupt__))
{
INTCON1bits.OSCFAIL = 0;
while (1);
}
:
_OscillatorFail(void);
_AltOscillatorFail(void);
_OscillatorFail(void)
//Clear the trap flag
_AltOscillatorFail(void)
- Use ASSERTs.
DS51795B-page 46
2010 Microchip Technology Inc.
Frequently Asked Questions (FAQs)
• I have finished debugging my code. Now I’ve programmed my part, but it
won’t run. What’s wrong?
Some things to consider are:
- Have you selected the debugger as a programmer and then tried to program
a header board? A header board contains an -ICE/-ICD version of the device
and may not function like the actual device. Only program regular devices
with the debugger as a programmer. Regular devices include devices that
have on-board ICE/ICD circuitry, but are not the special -ICE/-ICD devices
found on header boards.
- Have you selected the debugger as a debugger and then tried to program a
production device? Programming a device when the debugger is a debugger
will program a debug executive into program memory and set up other device
features for debug (see Section 2.6.1 “Sequence of Operations Leading to
Debugging”). To program final (release) code, select the debugger as a
programmer.
- Have you selected “Release” from the Build Configuration drop-down list or
Project menu? You must do this for final (release) code. Rebuild your project,
reprogram the device, and try to run your code again.
• I don’t see my problem here. Now what?
Try the following resources:
- Section 2.8 “Resources Used by the Debugger”
- Section 9.2 “Specific Error Messages”
- Section 9.3 “General Corrective Actions”
2010 Microchip Technology Inc.
DS51795B-page 47
PICkit™ 3 User’s Guide
NOTES:
DS51795B-page 48
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 9. Error Messages
9.1
INTRODUCTION
The PICkit 3 programmer/debugger produces many different error messages; some
are specific and others can be resolved with general corrective actions.
• Specific Error Messages
• General Corrective Actions
9.2
SPECIFIC ERROR MESSAGES
PICkit 3 programmer/debugger error messages are listed below in numeric order.
Note:
Numbers may not yet appear in displayed messages. Use the Search tab
on the Help viewer to find your message and highlight it below.
Text in error messages listed below of the form %x (a variable) will display as text
relevant to your particular situation in the actual error message.
PK3Err0001: Failed while writing to program memory.
PK3Err0002: Failed while writing to EEPROM.
PK3Err0003: Failed while writing to configuration memory.
See Section 9.3.1 “Read/Write Error Actions”.
PK3Err0005: PICkit 3 is currently busy and cannot be unloaded at this time.
If you receive this error when attempting to deselect the debugger as a debugger
or programmer:
1. Wait – give the debugger time to finish any application tasks. Then try to
deselect the debugger again.
2. Select Halt to stop any running applications. Then try to deselect the
debugger again.
3. Unplug the debugger from the PC. Then try to deselect the debugger again.
4. Shut down MPLAB IDE.
PK3Err0006: Failed while writing to user ID memory.
PK3Err0007: Failed while reading program memory.
PK3Err0008: Failed while reading EEPROM.
PK3Err0009: Failed while reading configuration memory.
PK3Err0010: Failed while reading user ID memory.
See Section 9.3.1 “Read/Write Error Actions”.
PK3Err0011: Bulk erase failed.
See Section 9.3.1 “Read/Write Error Actions”.
If these do not work, try another device.
2010 Microchip Technology Inc.
DS51795B-page 49
PICkit™ 3 User’s Guide
PK3Err0012: Download debug exec failed
If you receive this error while attempting to program from the Debugger menu:
1.
2.
3.
4.
Deselect the debugger as the debug tool.
Close your project and then close MPLAB IDE.
Restart MPLAB IDE and re-open your project.
Reselect the debugger as your debug tool and attempt to program your
target device again.
If this does not work, see Section 9.3.4 “Corrupted Installation Actions”.
PK3Err0013: NMMR register write failed.
PK3Err0014: File register write failed.
See Section 9.3.2 “Debugger-to-Target Communication Error Actions”.
PK3Err0015: Data transfer was unsuccessful. %d byte(s) expected, %d byte(s)
transferred.
See Section 9.3.3 “Debugger-to-PC Communication Error Actions”.
PK3Err0016: Cannot transmit. PICkit 3 not found.
The debugger is not connected to the PC.
PK3Err0017: File register read failed.
PK3Err0018: NMMR register read failed.
PK3Err0019: Failed while reading emulation registers.
PK3Err0020: Failed while writing emulation registers.
See Section 9.3.2 “Debugger-to-Target Communication Error Actions”.
PK3Err0021: Command not echoed properly. Sent %x, received %x.
PK3Err0022: Failed to get PICkit 3 version information.
PK3Err0024: Download RS failed.
PK3Err0025: Download AP failed.
See Section 9.3.3 “Debugger-to-PC Communication Error Actions”.
PK3Err0026: Download program exec failed.
If you receive this error while attempting to program from the Debugger menu:
1.
2.
3.
4.
Deselect the debugger as the debug tool.
Close your project and then close MPLAB IDE.
Restart MPLAB IDE and re-open your project.
Reselect the debugger as your debug tool and attempt to program your
target device again.
If this does not work, see Section 9.3.4 “Corrupted Installation Actions”.
PK3Err0027: Bulk transfer failed due to invalid checksum
See Section 9.3.3 “Debugger-to-PC Communication Error Actions”.
Also, ensure that the cables used are the correct length.
PK3Err0028: Download device database failed
If you receive this error:
1. Try downloading again. It may be a one-time error.
2. Try manually downloading. Select Debugger>Settings, Configuration tab,
and click Manual Download. Select the highest number .jam file and click
Open.
DS51795B-page 50
2010 Microchip Technology Inc.
Error Messages
PK3Err0029: Communication failure. Unexpected command echo response %x
received from PICkit 3.
See Section 9.3.3 “Debugger-to-PC Communication Error Actions”.
PK3Err0030: Unable to read/find firmware File %s.
If the Hex file exists:
• Reconnect and try again.
• If this does not work, the file may be corrupted. Reinstall MPLAB IDE.
If the Hex file does not exist:
• Reinstall MPLAB IDE.
PK3Err0031: Failed to get PC.
PK3Err0032: Failed to set PC.
See Section 9.3.2 “Debugger-to-Target Communication Error Actions”.
PK3Err0033: %d bytes expected, %d bytes received.
See Section 9.3.3 “Debugger-to-PC Communication Error Actions”.
PK3Err0034: This version of MPLAB IDE does not support hardware revision
%06x. Please upgrade to the latest version of MPLAB IDE before continuing.
Find the latest MPLAB IDE at www.microchip.com.
PK3Err0035: Failed to get Device ID.
See Section 9.3.1 “Read/Write Error Actions”.
PK3Err0036: MPLAB IDE has lost communication with PICkit 3.
See Section 9.3.3 “Debugger-to-PC Communication Error Actions”.
PK3Err0037: Timed out waiting for response from PICkit 3.
PK3Err0038: Failed to initialize PICkit 3.
PK3Err0039: PICkit 3 self-test failed.
For this error, the debugger is not responding:
1. Unplug and plug in the debugger.
2. Reconnect to the debugger in MPLAB IDE.
3. If the problem persists contact Microchip.
PK3Err0040: The target device is not ready for debugging. Please check your
Configuration bit settings and program the device before proceeding.
You will receive this message when you have not programmed your device for
the first time and try to Run. If you receive this message after this, or immediately
after programming your device, please refer to Section 9.3.6 “Debug Failure
Actions”.
PK3Err0043: RS download failed.
PK3Err0044: AP download failed.
PK3Err0045: You must connect to a target device to use PICkit 3.
No power has been found.
1. Ensure VDD and GND are connected between the debugger and target.
2. Ensure that the target is powered.
3. Ensure that the target power is sufficient to be detected by the debugger (see
Appendix A. “Hardware Specification”.)
PK3Err0046: An error occurred while trying to read the stopwatch count. The
stopwatch count may not be accurate.
2010 Microchip Technology Inc.
DS51795B-page 51
PICkit™ 3 User’s Guide
See Section 9.3.2 “Debugger-to-Target Communication Error Actions”.
PK3Err0047: Bootloader download failed.
See Section 9.3.3 “Debugger-to-PC Communication Error Actions”.
PK3Err0052: The current PICkit 3 hardware version %x, is out of date. This
version of MPLAB IDE will support only version %x or higher.
Did you click Cancel when asked to download the latest firmware? If so, you will
need to download it now. Select Debugger>Settings, Configuration tab, and
click Manual Download. Select the highest number .jam file and click Open.
If you cannot find any files to download or if this does not work (corrupted file),
you will need to get the latest version of MPLAB IDE and install it. Find the latest
MPLAB IDE at www.microchip.com.
PK3Err0053: Unable to get PICkit 3 protocol versions.
See Section 9.3.3 “Debugger-to-PC Communication Error Actions”.
PK3Err0054: MPLAB IDE's PICkit 3 protocol definitions are out of date. You must
upgrade MPLAB IDE to continue.
Find the latest MPLAB IDE at www.microchip.com.
PK3Err0055: Unable to set firmware suite version.
PK3Err0056: Unable to get voltages from PICkit 3.
See Section 9.3.3 “Debugger-to-PC Communication Error Actions”.
PK3Err0068: Failed while writing to boot Flash memory.
PK3Err0069: Failed while reading boot Flash memory.
PK3Err0070: Failed while writing peripheral memory.
PK3Err0071: Failed while reading peripheral memory.
See Section 9.3.1 “Read/Write Error Actions”.
PK3Err0072: Unable to send freeze peripheral information.
PK3Err0073: Device is code-protected.
The device on which you are attempting to operate (read, program, blank check
or verify) is code-protected, i.e., the code cannot be read or modified. Check your
Configuration bits setting for code protection.
To disable code protection, set or clear the appropriate Configuration bits in code
or in the Configuration Bits window (Configure>Configuration Bits), according to
the device data sheet. Then erase and reprogram the entire device.
PK3Err0075: Unable to set power.
PICkit 3 cannot supply power to the target.
PK3Err0080: Failed setting shadow bit(s).
9.3
GENERAL CORRECTIVE ACTIONS
These general corrective actions may solve your problem:
•
•
•
•
•
•
•
DS51795B-page 52
Read/Write Error Actions
Debugger-to-Target Communication Error Actions
Debugger-to-PC Communication Error Actions
Corrupted Installation Actions
USB Port Communication Error Actions
Debug Failure Actions
Internal Error Actions
2010 Microchip Technology Inc.
Error Messages
9.3.1
Read/Write Error Actions
If you receive a read or write error:
1. Did you hit Abort? This may produce read/write errors.
2. Try the action again. It may be a one-time error.
3. Ensure that the target is powered and at the correct voltage levels for the device.
See the device data sheet for required device voltage levels.
4. Ensure that the debugger-to-target connection is correct (PGC and PGD are
connected.)
5. For write failures, ensure that “Erase all before Program” is checked on the
Program Memory tab of the Settings dialog.
6. Ensure that the cables used are of the correct length.
9.3.2
Debugger-to-Target Communication Error Actions
The PICkit 3 programmer/debugger and the target device are out-of-sync with each
other.
1. Select Reset and then try the action again.
2. Ensure that the cable(s) used are the correct length.
9.3.3
Debugger-to-PC Communication Error Actions
The PICkit 3 programmer/debugger and MPLAB IDE are out-of-sync with each other.
1.
1.
2.
3.
Unplug and then plug in the debugger.
Reconnect to the debugger.
Try the operation again. It is possible the error was a one time glitch.
The version of MPLAB IDE installed may be incorrect for the version of firmware
loaded on the PICkit 3 programmer/debugger. Follow the steps outlined in
Section 9.3.4 “Corrupted Installation Actions”.
9.3.4
Corrupted Installation Actions
The problem is most likely caused by a incomplete or corrupted installation of MPLAB
IDE.
1. Uninstall all versions of MPLAB IDE from the PC.
2. Reinstall the desired MPLAB IDE version.
3. If the problem persists contact Microchip.
9.3.5
USB Port Communication Error Actions
The problem is most likely caused by a faulty or non-existent communications port.
1. Reconnect to the PICkit 3 programmer/debugger
2. Make sure the debugger is physically connected to the PC on the appropriate
USB port.
3. Make sure the appropriate USB port has been selected in the debugger Settings.
4. Make sure the USB port is not in use by another device.
5. If using a USB hub, make sure it is powered.
6. Make sure the USB drivers are loaded.
9.3.6
Debug Failure Actions
The PICkit 3 programmer/debugger was unable to perform a debugging operation.
There are numerous reasons why this might occur. See Section 7.3 “Top 10 Reasons
Why You Can’t Debug” and Section 7.4 “Other Things to Consider”.
2010 Microchip Technology Inc.
DS51795B-page 53
PICkit™ 3 User’s Guide
9.3.7
Internal Error Actions
Internal errors are unexpected and should not happen. They are primarily used for
internal Microchip development.
The most likely cause is a corrupted installation (Section 9.3.4 “Corrupted
Installation Actions”).
Another likely cause is exhausted system resources.
1. Try rebooting your system to free up memory.
2. Make sure you have a reasonable amount of free space on your hard drive (and
that it is not overly fragmented.)
If the problem persists contact Microchip.
DS51795B-page 54
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Part 3 – Reference
Chapter 10. Debugger Function Summary ................................................................ 57
Appendix A. Hardware Specification.......................................................................... 69
Appendix B. PICkit 3 Schematics ............................................................................... 75
2010 Microchip Technology Inc.
DS51795B-page 55
PICkit™ 3 User’s Guide
NOTES:
DS51795B-page 56
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Chapter 10. Debugger Function Summary
10.1
INTRODUCTION
A summary of the PICkit 3 programmer/debugger functions on MPLAB IDE menus, in
windows and on dialogs is listed here.
•
•
•
•
10.2
Debugging Functions
Debugging Dialogs/Windows
Programming Functions
Settings Dialog
DEBUGGING FUNCTIONS
When you select the PICkit 3 from the Debugger menu, the following items will be
added to the MPLAB IDE functions:
• Debugger Menu – additional options are added to the drop-down menu
• Right Mouse Button Debugger Menu – additional options are added to this menu
• Toolbars/Status Bar – a toolbar appears below the menu bar; additional
information appears in the status bar
10.2.1
Debugger Menu
Run F9
Execute program code until a breakpoint is encountered or until Halt is selected.
Execution starts at the current Program Counter (as displayed in the status bar). The
current Program Counter location is also represented as a pointer in the Program
Memory window. While the program is running, several other functions are disabled.
Animate
Animate causes the debugger to actually execute single steps while running, updating
the values of the registers as it runs.
Animate runs slower than the Run function, but allows you to view changing register
values in the Special Function Register window or in the Watch window.
To Halt Animate, use the menu option Debugger>Halt, the toolbar Halt or <F5>.
Halt F5
Halt (stop) the execution of program code. When you click Halt, status information is
updated.
Step Into F7
Single step through program code.
For assembly code, this command executes one instruction (single or multiple cycle
instructions) and then halts. After execution of one instruction, all the windows are
updated.
2010 Microchip Technology Inc.
DS51795B-page 57
PICkit™ 3 User’s Guide
For C code, this command executes one line of C code, which may mean the execution
of one or more assembly instruction, and then halts. After execution, all the windows
are updated.
Note:
Do not step into a SLEEP instruction.
Step Over F8
Execute the instruction at the current program counter location. At a CALL instruction,
Step Over executes the called subroutine and halts at the address following the CALL.
If the Step Over is too long or appears to “hang”, click Halt.
Step Out
Not available.
Reset > Processor Reset F6
Issue a Reset sequence to the target processor. This issues a MCLR to reset the
Program Counter to the Reset vector.
Breakpoints
Open the Breakpoint dialog (see Section 10.3.1 “Breakpoints Dialog”). Use hardware breakpoints to halt code execution at specified lines in your code. Set multiple
breakpoints in this dialog.
Note:
You may also right click or double click on a line of code to set a simple
breakpoint.
Program
Download your code to the target device.
Read
Read target memory. Information uploaded to MPLAB IDE.
Erase Flash Device
Erase all Flash memory.
Abort Operation
Abort any programming operation (e.g., program, read, etc.). Terminating an operation
will leave the device in an unknown state.
Reconnect
Attempt to re-establish communications between the PC and the PICkit 3
programmer/debugger. The progress of this connection is shown on the PICkit 3 tab of
the Output dialog.
Settings
Open the PICkit 3 Settings dialog (see Section 10.5 “Settings Dialog”). Set up
program and firmware options.
DS51795B-page 58
2010 Microchip Technology Inc.
Debugger Function Summary
10.2.2
Right Mouse Button Debugger Menu
These debugger menu options will appear on the right mouse menus in code displays,
such as program memory and source code files. Descriptions of other menu options
not listed here can be found in the MPLAB IDE Help or the MPLAB Editor Help.
Set Breakpoint
Set or remove a breakpoint at the currently selected line.
Breakpoints
Remove, enable or disable all breakpoints.
Run To Cursor
Run the program to the current cursor location. Formerly Run to Here.
Set PC at Cursor
Set the Program Counter (PC) to the cursor location.
Center Debug Location
Center the current PC line in the window.
10.2.3
Toolbars/Status Bar
When the PICkit 3 programmer/debugger is selected as a debugger, these toolbars are
displayed in MPLAB IDE:
• Basic debug toolbar (Run, Halt, Animate, Step Into, Step Over, Step Out, Reset,
Breakpoints).
• Simple program toolbar (Program, Read, Erase Flash Device).
The selected debug tool (PICkit 3), as well as other development information, is
displayed in the status bar on the bottom of the MPLAB IDE desktop. Refer to the
MPLAB IDE online help for information on the contents of the status bar.
10.3
DEBUGGING DIALOGS/WINDOWS
Open the following debug dialogs and windows using the menu items mentioned in
Section 10.2 “Debugging Functions”.
• Breakpoints Dialog
- Set Breakpoint Dialog
- Stopwatch Dialog
- Event Breakpoints Dialog
10.3.1
Breakpoints Dialog
To set up breakpoints, select Debugger>Breakpoints.
Set up different types of breakpoints in this dialog. Click on Add Breakpoint to add
breakpoints to the dialog window. Depending on your selected device, there may be
other buttons for more advanced breakpoint options.
2010 Microchip Technology Inc.
DS51795B-page 59
PICkit™ 3 User’s Guide
10.3.1.1
BREAKPOINT DIALOG WINDOW
Information about each breakpoint is visible in this window.
TABLE 10-1:
BREAKPOINT DIALOG WINDOW
Control
Function
Breakpoint Type
Type of breakpoint – program or data
Address
Hex address of breakpoint location
File Line #/Symbol Name File name and line number of breakpoint location
Enabled
Check to enable a breakpoint
Once a breakpoint has been added to the window, you may right click on it to open a
menu of options:
•
•
•
•
Delete – delete selected breakpoint
Edit/View – open the Set Breakpoint Dialog
Delete All – delete all listed breakpoints
Disable All – disable all listed breakpoints
10.3.1.2
BREAKPOINT DIALOG BUTTONS
Use the buttons to add a breakpoint and set up additional break conditions. Also, a
stopwatch is available for use with breakpoints and triggers.
Note:
Buttons displayed will depend on the selected device.
TABLE 10-2:
BREAKPOINT DIALOG BUTTONS
Control
DS51795B-page 60
Function
Related Dialog
Add Breakpoint
Add a breakpoint
Section 10.3.2 “Set Breakpoint Dialog”
Stopwatch
Set up the stopwatch
Section 10.3.3 “Stopwatch Dialog”
Event Breakpoints
Set up break on an event
Section 10.3.4 “Event Breakpoints
Dialog”
2010 Microchip Technology Inc.
Debugger Function Summary
10.3.2
Set Breakpoint Dialog
Click Add Breakpoint in the Breakpoints Dialog to display this dialog.
Select a breakpoint for the Breakpoints dialog here.
10.3.2.1
PROGRAM MEMORY TAB
Set up a program memory breakpoint here.
TABLE 10-3:
PROGRAM MEMORY BREAKPOINT
Control
Function
Address
Location of breakpoint in hex
Breakpoint Type
The type of program memory breakpoint. See the device data
sheet for more information on table reads/writes.
Program Memory Execution – break on execution of above
address
TBLRD Program Memory – break on table read of above address
TBLWT Program Memory – break on table write to above address
Pass Count
Break on pass count condition.
Always break – always break as specified in “Breakpoint type”
Break occurs Count instructions after Event – wait Count (0-255)
instructions before breaking after event specified in “Breakpoint
type”
Event must occur Count times – break only after event specified in
“Breakpoint type” occurs Count (0-255) times
10.3.2.2
DATA MEMORY TAB
Set up a data memory breakpoint here.
TABLE 10-4:
Control
DATA MEMORY BREAKPOINT
Function
Address
Location of breakpoint in hex
Breakpoint Type
The type of data memory breakpoint. See the device data sheet for
more information on X Bus reads/writes.
X Bus Read – break on an X bus read of above address
X Bus Read Specific Byte – break on an X bus read of above
address for the specific byte value in “Specific Value”
X Bus Read Specific Word – break on an X bus read of above
address for the specific word value in “Specific Value”
X Bus Write – break on an X bus write of above address
X Bus Write Specific Byte – break on an X bus write of above
address for the specific byte value in “Specific Value”
X Bus Write Specific Word – break on an X bus write of above
address for the specific word value in “Specific Value”
Pass Count
Break on pass count condition.
Always break – always break as specified in “Breakpoint type”
Break occurs Count instructions after Event – wait Count (0-255)
instructions before breaking after event specified in “Breakpoint
type”
Event must occur Count times – break only after event specified in
“Breakpoint type” occurs Count (0-255) times
2010 Microchip Technology Inc.
DS51795B-page 61
PICkit™ 3 User’s Guide
10.3.3
Stopwatch Dialog
Click Stopwatch in the Breakpoints Dialog to display the Stopwatch Setup dialog.
Use the stopwatch with breakpoints to time code execution. The stopwatch allows timing from one breakpoint/trigger condition to the next. The stopwatch value is in decimal.
TABLE 10-5:
STOPWATCH SETUP
Control
Function
Start Condition
Select an available breakpoint or trigger condition to start the stopwatch. Available breakpoints/triggers are those previously added
to the breakpoint dialog.
Select None to clear the start condition.
To halt the program run on this condition, check the check box next
to “Start condition will cause the target device to halt”.
Stop Condition
Select an available breakpoint or trigger condition to stop the stopwatch. Available breakpoints/triggers are those previously added
to the breakpoint dialog.
Select None to clear the stop condition.
To halt the program run on this condition, check the check box next
to “Stop condition will cause the target device to halt”.
Reset stopwatch on run
Reset the stopwatch values to zero every time the program is run.
To set a breakpoint in code, do one of the following:
• Double click or right click on a line of code to set up an individual breakpoint.
• Select Debugger>Breakpoints to open the Breakpoints dialog and set up multiple
breakpoints and breakpoint conditions. See Section 10.3.1 “Breakpoints
Dialog” for more information.
To determine the time between the breakpoints, use the stopwatch:
1. Open the Breakpoints dialog (Debugger>Breakpoints).
1. Click Stopwatch on the Breakpoints dialog to open the Stopwatch dialog.
2. Under “Start Condition”, select a breakpoint from the drop-down list. Also decide
if “Start condition will cause the target device to halt”.
3. Under “Stop Condition”, select another breakpoint from the drop-down list. Also
decide if “Stop condition will cause the target device to halt”.
4. Decide if there will be a “Reset stopwatch on run”.
5. Click OK.
10.3.4
Event Breakpoints Dialog
Click Event Breakpoints in the Breakpoints Dialog to display this dialog.
Select a condition where the program will always break:
• Break on Watchdog Timer – Break every time the Watchdog Timer times out.
Make sure the Watchdog Timer is enabled in the Configuration bits.
• Break on SLEEP instruction – Break when a SLEEP instruction is encountered in
the program.
DS51795B-page 62
2010 Microchip Technology Inc.
Debugger Function Summary
10.4
PROGRAMMING FUNCTIONS
When you select the PICkit 3 programmer/debugger from the Programmer menu,
program items will be added to the following MPLAB IDE functions:
• Programmer Menu
• Toolbars/Status Bar
10.4.1
Programmer Menu
Program
Program specified memory areas: program memory, Configuration bits, ID locations
and/or EEPROM data. See the Settings dialog for programming options.
Verify
Verify programming of specified memory areas: program memory, Configuration bits,
ID locations and/or EEPROM data.
Read
Read specified memory areas: program memory, Configuration bits, ID locations
and/or EEPROM data. See the Settings dialog for read options.
Blank Check All
Check to see that all device memory is erased/blank.
Erase Flash Device
Erase all Flash memory.
Abort Operation
Abort any programming operation (e.g., program, read, etc.). Terminating an operation
will leave the device in an unknown state.
Reconnect
Attempt to re-establish communications between the PC and the PICkit 3
programmer/debugger. The progress of this connection is shown on the PICkit 3 tab of
the Output dialog.
Settings
Open the Programmer dialog (see Section 10.5 “Settings Dialog”). Set up program
and firmware options.
10.4.2
Toolbars/Status Bar
When the PICkit 3 programmer/debugger is selected as a programmer, these toolbars
are displayed in MPLAB IDE:
• Basic program toolbar (Program, Read, Verify, Erase Flash Device, Blank Check
All).
The selected programmer (PICkit 3), as well as other programming information, is
displayed in the status bar on the bottom of the MPLAB IDE desktop. Refer to the
MPLAB IDE online help for information on the contents of the status bar.
2010 Microchip Technology Inc.
DS51795B-page 63
PICkit™ 3 User’s Guide
10.5
SETTINGS DIALOG
Select either Debugger>Settings or Programmer>Settings to open the Settings dialog
and set up the PICkit 3 programmer/debugger.
Note:
•
•
•
•
•
•
•
•
•
•
The tabs displayed will depend on the selected device and whether you
have the PICkit 3 selected as a debugger or a programmer.
Settings Dialog, Program Memory Tab
Settings Dialog, Configuration Tab
Settings Dialog, Freeze on Halt Tab
Settings Dialog, Status Tab
Settings Dialog, Clock Tab
Settings Dialog, Secure Segment Tab
Settings Dialog, Warnings Tab
Settings Dialog, Power Tab
Settings Dialog, Limitations Tab
Settings Dialog, Programmer-to-go Tab
10.5.1
Settings Dialog, Program Memory Tab
This tab allows you to set up debug/programming options.
TABLE 10-6:
PROGRAM MEMORY OPTIONS
Allow PICkit 3 to select
memories and ranges
If selected, the PICkit™ 3 uses your selected device and
default settings to determine what to program.
Manually select memories
and ranges
If selected, you must determine the Memories, Program
Memory Range, and Program Options for the selected device.
Memories:
Program
Check to program Program Memory into target.
Configuration
Check to program Configuration bits into target.
Note: This memory is always programmed when debugger
selected as a debugger.
EEPROM
Check to erase and then program EEPROM memory on
target, if available. Uncheck to erase EEPROM memory on
target.
ID
Check to program ID Memory into target.
Boot Flash
If supported, check to program boot memory on target
Program Memory Range:
Start, End
The starting and ending hex address range in program
memory for programming, reading, or verification.
If you receive a programming error due to an incorrect end
address, you need to perform a reconnect, correct the end
address and program again.
Note: The address range does not apply to the Erase
function. The Erase function will erase all data on the device.
Program Options:
Erase all before Program
DS51795B-page 64
Check to erase all memory before programming begins.
Unless programming new or already erased devices, it is
important to have this box checked. If not checked, the device
is not erased and program code will be merged with the code
already in the device.
2010 Microchip Technology Inc.
Debugger Function Summary
TABLE 10-6:
PROGRAM MEMORY OPTIONS (CONTINUED)
Preserve Program Memory
Range
Check to preserve memory range.
Start, End – The starting and ending hex address range in
program memory for preservation.
Use high voltage on MCLR
For PIC24FXXKAXXX devices:
Check this option to use high voltage to configure pin as either
a normal input pin or as a MCLR Reset.
Leave unchecked for a low-voltage MCLR Reset.
Notes:
1. As long as the configuration setting is “MCLR pin
enabled; RA5 input pin disabled”, then you can use Low
Voltage Entry (uncheck the “Use high voltage on MCLR”
option).
2. If you have the configuration setting to “RA5 input pin
enabled; MCLR disabled”, then you must check the
“Use high voltage on MCLR” option.
3. If you want to program the “MCLR pin enable bit” configuration setting, you must check the “Use high voltage on
MCLR” option.
4. If you are using a -ICE header, the setting of this checkbox does not matter.
Automatically
Program after successful
build
After the application code successfully builds, program this
code into the device.
Run after successful program This option is available only in Debug mode.
After the application code is successfully programmed into the
target device, run the code.
10.5.2
Settings Dialog, Configuration Tab
Configure debugger operation on this tab.
TABLE 10-7:
CONFIGURATION ITEMS
Download Firmware
Set up firmware download options.
Auto Download Latest
Firmware
Check to allow automatic download of the latest version of
firmware for the target device (recommended).
Manual Download
Manually select a firmware file to download to the target device.
10.5.3
Settings Dialog, Freeze on Halt Tab
Select peripherals to freeze on halt on this tab.
PIC12/16 MCU Devices
To freeze/unfreeze all device peripherals on halt, check/uncheck the “Freeze on Halt”
checkbox. If this does not halt your desired peripheral, be aware that some peripherals
have no freeze on halt capability and cannot be controlled by the emulator.
There may be device-specific limitations for peripherals that do support freeze. Click
the Limitations button to find these.
PIC18 MCU Devices
To freeze/unfreeze all device peripherals on halt, check/uncheck the “Freeze on Halt”
checkbox. If this does not halt your desired peripheral, be aware that some peripherals
have no freeze on halt capability and cannot be controlled by the debugger.
2010 Microchip Technology Inc.
DS51795B-page 65
PICkit™ 3 User’s Guide
dsPIC30F/33F, PIC24F/H and PIC32MX Devices
For peripherals in the list “Peripherals to Freeze on Halt”, check to freeze that
peripheral on a halt. Uncheck the peripheral to let it run while the program is halted. If
you do not see a peripheral on the list, check “All Other Peripherals”. If this does not
halt your desired peripheral, be aware that some peripherals have no freeze on halt
capability and cannot be controlled by the debugger.
To select all peripherals, including “All Other Peripherals”, click Check All. To deselect
all peripherals, including “All Other Peripherals”, click Uncheck All.
10.5.4
Settings Dialog, Status Tab
View the status of your PICkit 3 system on this tab.
TABLE 10-8:
STATUS ITEMS
Versions
Firmware Suite Version
Debugger firmware suite version. The firmware suite consists of
the three items specified below.
Algorithm Plug-in Version Debugger algorithm plug-in version. For your selected device, an
algorithm is used to support the device plugged into the target.
OS Version
Debugger operating system version.
Voltages
PICkit™ 3 VPP
PICkit 3
VDD
Refresh Voltages
DS51795B-page 66
Debugger VPP.
Debugger VDD.
Sensing of Status tab items occurs when the tab is activated. To
see updates, click this button.
2010 Microchip Technology Inc.
Debugger Function Summary
10.5.5
Settings Dialog, Clock Tab
The Debug Clock mode is selected on this tab. Check the box for “FRC in Debug mode”
to use the fast RC clock while debugging.
Device emulation occurs at the speed of the processor. If it is running at low frequency
(for example 32 kHz), all operations such as stepping, refreshing the Watch window,
etc. are slow. However, some processors have a built-in Fast RC oscillator. If the “FRC
in Debug mode” option is checked, after the application running at normal speed halts,
it switches to the faster oscillator enabling emulation and peripherals (if not frozen) to
run faster.
10.5.6
Settings Dialog, Secure Segment Tab
For CodeGuard™ Security devices, set up secure segment properties on this tab.
For more details on CodeGuard Security functionality, please refer to the CodeGuard
Security reference manual for 16-bit devices (DS70180) and dsPIC33F/PIC24H and
dsPIC30F device programming specifications found on our web site.
TABLE 10-9:
SECURE SEGMENT OPTIONS
Full Chip Programming
Click to select to program all program memory segments.
Segment Programming
Click to select segment programming. Select from:
- Boot, secure and general segments
- Secure and general segments
- General segment only
10.5.7
Settings Dialog, Warnings Tab
A list of all PICkit 3 programmer/debugger warnings are displayed on this tab.
• Check a warning to enable it. The warning will be displayed in the Output window.
• Uncheck a warning to disable it.
Warnings are not errors and will not stop your project from building. If you receive error
messages, please see Chapter 9. “Error Messages”.
10.5.8
Settings Dialog, Power Tab
Set up the power options on this tab.
• Click in the checkbox to enable/disable “Power target circuit from PICkit 3”.
If you enable (check) this option, the Power on/off button will be enabled on the
toolbar. It will initially be in the Power On state. Every time it is clicked it will toggle
to the opposite state. If it is on, it will toggle to off, and if it is off it will toggle to on.
If the Power target circuit setting is disabled (unchecked) the Power on/off button
will go back to the disabled state.
Whatever state it is in when the workspace was last saved will be the state that it
is in when the workspace is reopened.
• Adjust the slide bar to select the voltage. The value in the field changes according
to your adjustments.
10.5.9
Settings Dialog, Limitations Tab
This tab displays general limitations for the selected device. For specific limitation
information, click Details.
2010 Microchip Technology Inc.
DS51795B-page 67
PICkit™ 3 User’s Guide
10.5.10 Settings Dialog, Programmer-to-go Tab
This tab enables you to name the image of the programming and send to memory in
the PICkit 3.
TABLE 10-10: PROGRAMMER-TO-GO OPTIONS
Image Name
Type the name of the programming image.
Programmer Setting
Displays the settings selected for programming the device.
Report
If you want to change any of these settings, use the appropriate tab in the PICkit 3 Settings dialog.
Send Image In Memory
Executes an image transfer from MPLAB IDE to the PICkit 3
unit.
DS51795B-page 68
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Appendix A. Hardware Specification
A.1
INTRODUCTION
The hardware and electrical specifications of the PICkit 3 programmer/debugger
system are detailed.
A.2
HIGHLIGHTS
This chapter discusses:
•
•
•
•
•
A.3
Declaration of Conformity
USB Port/Power
PICkit 3 Programmer/Debugger
Standard Communication Hardware
Target Board Considerations
DECLARATION OF CONFORMITY
We
Microchip Technology, Inc.
2355 W. Chandler Blvd.
Chandler, Arizona 85224-6199
USA
hereby declare that the product:
PICkit 3 Programmer/Debugger
complies with the following standards, provided that the restrictions stated in the
operating manual are observed:
Standards: EN61010-1
Laboratory Equipment
Microchip Technology, Inc.
Date: January 2009
Important Information Concerning the Use of the PICkit 3 programmer/Debugger
Due to the special nature of the PICkit 3 programmer/debugger, the user is advised that
it can generate higher than normal levels of electromagnetic radiation which can
interfere with the operation of all kinds of radio and other equipment.
To comply with the European Approval Regulations therefore, the following restrictions
must be observed:
1. The development system must be used only in an industrial (or comparable)
area.
2. The system must not be operated within 20 meters of any equipment which may
be affected by such emissions (radio receivers, TVs etc.).
2010 Microchip Technology Inc.
DS51795B-page 69
PICkit™ 3 User’s Guide
A.4
USB PORT/POWER
The PICkit 3 programmer/debugger is connected to the host PC via a mini Universal
Serial Bus (USB) port, version 2.0 compliant. The USB connector is located on the top
of the pod.
The system is capable of reloading the firmware via the USB interface.
System power is derived from the USB interface. The debugger is classified as a high
power system per the USB specification, and requires slightly more than 100 mA of
power from the USB to function in all operational modes (debugger/programmer).
Note:
The PICkit 3 programmer/debugger is powered through its USB
connection. The target board is powered from its own supply. Alternatively,
the PICkit 3 can power it only if the target consumes less than 30 mA.
Cable Length – The PC-to-debugger cable length for proper operation is shipped in
the debugger kit.
Powered Hubs – If you are going to use a USB hub, make sure it is self-powered. Also,
USB ports on PC keyboards do not have enough power for the debugger to operate.
PC Hibernate/Power-Down Modes – Disable the hibernate or other power saver
modes on your PC to ensure proper USB communications with the debugger.
A.5
PICKIT 3 PROGRAMMER/DEBUGGER
The debugger consists of a main board enclosed in the casing with a USB connector
and a single in-line connector. On the debugger enclosure are indicator lights (LEDs).
A.5.1
Main Board
This component has the interface processor with integrated USB 2.0 interface capable
an SPI, serial EE for programming into the emulation device on-board Flash and LED
indicators.
A.5.2
Indicator Lights (LEDs)
The indicator lights have the following significance.
LED
DS51795B-page 70
Color
Description
Power
Green
Lit when power is first applied or when target is connected.
Active
Blue
Lit when the PICkit™ 3 has established communication with the
PC or sending/receiving commands.
Status
Green
Lit when the debugger is operating normally – standby.
Yellow
Lit when an operation is busy.
Red
Lit when the debugger has failed.
2010 Microchip Technology Inc.
Hardware Specification
A.6
STANDARD COMMUNICATION HARDWARE
For standard debugger communication with a target (Section 2.3 “Debugger to
Target Communication”, “Standard ICSP Device Communication“), use an adapter
with an RJ-11 connector.
To use this type of communication with a header board, you may need a device-specific
Processor Pak, which includes an 8-pin connector header board containing the desired
ICE/ICD device and a standard adapter board.
Note:
Older header boards used a 6-pin (RJ-11) connector instead of an 8-pin
connector, so these headers may be connected directly to the debugger.
For more on available header boards, see the “Header Board Specification”
(DS51292).
A.6.1
Standard Communication
The standard communication is the main interface to the target processor. It contains
the connections to the high voltage (VPP), VDD sense lines, and clock and data
connections required for programming and connecting with the target devices.
The VPP high-voltage lines can produce a variable voltage that can swing from 1.8 to
14 volts to satisfy the voltage requirements for the specific emulation processor.
The VDD sense connection draws current from the target processor.
The clock and data connections are interfaces with the following characteristics:
• Clock and data signals are in High-Impedance mode (even when no power is
applied to the PICkit 3 programmer/debugger system)
• Clock and data signals are protected from high voltages caused by faulty targets
systems, or improper connections
• Clock and data signals are protected from high current caused from electrical
shorts in prototype or target systems
FIGURE A-1:
6-PIN STANDARD PINOUT
Pin
Standard Socket
2
1
3 5
Bottom of
Target Board
MCLR/VPP
VDD_TGT
GND
PGD (ICSPDAT)
PGC (ICSPCLK)
PGM (LVP)
Function
Power
Power on target
Ground
Standard Com Data
Standard Com Clock
Low Voltage Programming
Target Device
or PIM
Target Board
2010 Microchip Technology Inc.
4 6
1
2
3
4
5
6
Name
DS51795B-page 71
PICkit™ 3 User’s Guide
A.6.2
Modular Cable and Connector
For standard communications, a modular cable connects the debugger and the target
application. The specifications for this cable and its connectors are listed below.
A.6.2.1
MODULAR CONNECTOR SPECIFICATION
• Manufacturer, Part Number – AMP Incorporated, 555165-1
• Distributor, Part Number – Digi-Key, A9031ND
The table within Figure A-2 shows how the modular connector pins on an application
correspond to the microcontroller pins. This configuration provides full ICD
functionality.
FIGURE A-2:
MODULAR CONNECTOR PINOUT OF TARGET BOARD
1 6
Modular
Connector Pin
Microcontroller
Pin
6
PGM (LVP)
5
RB6
4
RB7
3
Ground
2
VDD Target
1
VPP
Front view of Modular Connector
on Target Board
6
1
Bottom view of Modular Connector
Pinout on Target Board
AC164110
Adapter
Mini-USB
cable
to PC
PICkit™ 3
Device-ICE
Power
Header
Transition Socket
A.6.2.2
Target Board
MODULAR PLUG SPECIFICATION
• Manufacturer, Part Number – AMP Incorporated, 5-554710-3
• Distributor, Part Number – Digi-Key, A9117ND
DS51795B-page 72
2010 Microchip Technology Inc.
Hardware Specification
A.6.2.3
MODULAR CABLE SPECIFICATION
• Manufacturer, Part Number – Microchip Technology, 07-00024
A.7
TARGET BOARD CONSIDERATIONS
The target board should be powered according to the requirements of the selected
device (1.8V-5.0V) and the application.
Depending on the type of debugger-to-target communications used, there will be some
considerations for target board circuitry:
• Section 2.4.2 “Target Connection Circuitry”
• Section 2.4.5 “Circuits That Will Prevent the Debugger From Functioning”
2010 Microchip Technology Inc.
DS51795B-page 73
PICkit™ 3 User’s Guide
NOTES:
DS51795B-page 74
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Appendix B. PICkit 3 Schematics
PICkit 3 Development Programmer/Debugger schematic diagrams are shown here.
Demo board schematics are found in their respective user’s guides.
FIGURE B-1:
PICkit™ 3 SCHEMATIC DIAGRAM (PAGE 1 OF 2)
2010 Microchip Technology Inc.
DS51795B-page 75
PICkit™ 3 User’s Guide
PICkit™ 3 SCHEMATIC DIAGRAM (PAGE 2 OF 2)
USE
FIGURE B-2:
DS51795B-page 76
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Glossary
Absolute Section
A section with a fixed (absolute) address that cannot be changed by the linker.
Access Memory
PIC18 Only – Special registers on PIC18 devices that allow access regardless of the
setting of the Bank Select Register (BSR).
Access Entry Points
Access entry points provide a way to transfer control across segments to a function
which may not be defined at link time. They support the separate linking of boot and
secure application segments.
Address
Value that identifies a location in memory.
Alphabetic Character
Alphabetic characters are those characters that are letters of the arabic alphabet
(a, b, …, z, A, B, …, Z).
Alphanumeric
Alphanumeric characters are comprised of alphabetic characters and decimal digits
(0,1, …, 9).
ANDed Breakpoints
Set up an ANDed condition for breaking, i.e., breakpoint 1 AND breakpoint 2 must
occur at the same time before a program halt. This can only be accomplished if a data
breakpoint and a program memory breakpoint occur at the same time.
Anonymous Structure
C30 – An unnamed structure.
C18 – An unnamed structure that is a member of a C union. The members of an anonymous structure may be accessed as if they were members of the enclosing union. For
example, in the following code, hi and lo are members of an anonymous structure
inside the union caster.
union castaway
int intval;
struct {
char lo; //accessible as caster.lo
char hi; //accessible as caster.hi
};
} caster;
ANSI
American National Standards Institute is an organization responsible for formulating
and approving standards in the United States.
Application
A set of software and hardware that may be controlled by a PIC® microcontroller.
2010 Microchip Technology Inc.
DS51795B-page 77
PICkit™ 3 User’s Guide
Archive
A collection of relocatable object modules. It is created by assembling multiple source
files to object files, and then using the archiver to combine the object files into one
library file. A library can be linked with object modules and other libraries to create
executable code.
Archiver
A tool that creates and manipulates libraries.
ASCII
American Standard Code for Information Interchange is a character set encoding that
uses 7 binary digits to represent each character. It includes upper and lowercase
letters, digits, symbols and control characters.
Assembler
A language tool that translates assembly language source code into machine code.
Assembly Language
A programming language that describes binary machine code in a symbolic form.
Assigned Section
A section which has been assigned to a target memory block in the linker command file.
Asynchronously
Multiple events that do not occur at the same time. This is generally used to refer to
interrupts that may occur at any time during processor execution.
Asynchronous Stimulus
Data generated to simulate external inputs to a simulator device.
Attribute
Characteristics of variables or functions in a C program which are used to describe
machine-specific properties.
Attribute, Section
Characteristics of sections, such as “executable”, “readonly”, or “data” that can be
specified as flags in the assembler .section directive.
Binary
The base two numbering system that uses the digits 0-1. The rightmost digit counts
ones, the next counts multiples of 2, then 22 = 4, etc.
Bookmarks
Use bookmarks to easily locate specific lines in a file.
Under the Edit menu, select Bookmarks to manage bookmarks. Toggle
(enable/disable) a bookmark, move to the next or previous bookmark, or clear all
bookmarks.
Breakpoint
Hardware Breakpoint: An event whose execution will cause a Halt.
Software Breakpoint: An address where execution of the firmware will halt. Usually
achieved by a special break instruction.
Build
Compile and link all the source files for an application.
C
A general-purpose programming language which features economy of expression,
modern control flow and data structures, and a rich set of operators.
DS51795B-page 78
2010 Microchip Technology Inc.
Glossary
Calibration Memory
A Special Function Register or registers used to hold values for calibration of a PIC
microcontroller on-board RC oscillator or other device peripherals.
Central Processing Unit
The part of a device that is responsible for fetching the correct instruction for execution,
decoding that instruction, and then executing that instruction. When necessary, it works
in conjunction with the arithmetic logic unit (ALU) to complete the execution of the
instruction. It controls the program memory address bus, the data memory address
bus, and accesses to the stack.
Clean
Under the MPLAB IDE Project menu, Clean removes all intermediary project files, such
as object, hex and debug files, for the active project. These files are recreated from
other files when a project is built.
COFF
Common Object File Format. An object file of this format contains machine code,
debugging and other information.
Command Line Interface
A means of communication between a program and its user based solely on textual
input and output.
Compiler
A program that translates a source file written in a high-level language into machine
code.
Conditional Assembly
Assembly language code that is included or omitted based on the assembly-time value
of a specified expression.
Conditional Compilation
The act of compiling a program fragment only if a certain constant expression, specified
by a preprocessor directive, is true.
Configuration Bits
Special-purpose bits programmed to set PIC microcontroller modes of operation. A
Configuration bit may or may not be preprogrammed.
Control Directives
Directives in assembly language code that cause code to be included or omitted based
on the assembly-time value of a specified expression.
CPU
See Central Processing Unit.
Cross Reference File
A file that references a table of symbols and a list of files that references the symbol. If
the symbol is defined, the first file listed is the location of the definition. The remaining
files contain references to the symbol.
Data Directives
Data directives are those that control the assembler’s allocation of program or data
memory and provide a way to refer to data items symbolically; that is, by meaningful
names.
2010 Microchip Technology Inc.
DS51795B-page 79
PICkit™ 3 User’s Guide
Data Memory
On Microchip MCU and DSC devices, data memory (RAM) is comprised of General
Purpose Registers (GPRs) and Special Function Registers (SFRs). Some devices also
have EEPROM data memory.
Debugger
Hardware that performs debugging.
Debugger System
The debugger systems include the pod, processor module, device adapter, target
board, cables, and MPLAB IDE software.
Debugging Information
Compiler and assembler options that, when selected, provide varying degrees of information used to debug application code. See compiler or assembler documentation for
details on selecting debug options.
Deprecated Features
Features that are still supported for legacy reasons, but will eventually be phased out
and no longer used.
Device Programmer
A tool used to program electrically programmable semiconductor devices such as
microcontrollers.
Digital Signal Controller
A microcontroller device with digital signal processing capability, i.e., Microchip dsPIC
DSC devices.
Digital Signal Processing
The computer manipulation of digital signals, commonly analog signals (sound or
image) which have been converted to digital form (sampled).
Digital Signal Processor
A microprocessor that is designed for use in digital signal processing.
Directives
Statements in source code that provide control of the language tool’s operation.
Download
Download is the process of sending data from a host to another device, such as an
emulator, programmer or target board.
DSC
See Digital Signal Controller.
DSP
See Digital Signal Processor.
dsPIC DSCs
dsPIC Digital Signal Controllers (DSCs) refers to all Microchip DSC families.
DWARF
Debug With Arbitrary Record Format. DWARF is a debug information format for ELF
files.
EEPROM
Electrically Erasable Programmable Read Only Memory. A special type of PROM that
can be erased electrically. Data is written or erased one byte at a time. EEPROM
retains its contents even when power is turned off.
DS51795B-page 80
2010 Microchip Technology Inc.
Glossary
ELF
Executable and Linking Format. An object file of this format contains machine code.
Debugging and other information is specified in with DWARF. ELF/DWARF provide
better debugging of optimized code than COFF.
Emulation
The process of executing software loaded into emulation memory as if it were firmware
residing on a microcontroller device.
Emulation Memory
Program memory contained within the emulator.
Emulator
Hardware that performs emulation.
Emulator System
The MPLAB ICE 2000 and MPLAB ICE 4000 emulator systems include the pod, processor module, device adapter, target board, cables, and MPLAB IDE software. The
MPLAB REAL ICE system consists of a pod, a driver (and potentially a receiver) card,
target board, cables, and MPLAB IDE software.
Endianness
The ordering of bytes in a multi-byte object.
Environment
IDE – The particular layout of the desktop for application development.
MPLAB PM3 – A folder containing files on how to program a device. This folder can be
transferred to a SD/MMC card.
Epilogue
A portion of compiler-generated code that is responsible for deallocating stack space,
restoring registers and performing any other machine-specific requirement specified in
the runtime model. This code executes after any user code for a given function,
immediately prior to the function return.
EPROM
Erasable Programmable Read Only Memory. A programmable read-only memory that
can be erased usually by exposure to ultraviolet radiation.
Error File
A file containing error messages and diagnostics generated by a language tool.
Errors
Errors report problems that make it impossible to continue processing your program.
When possible, errors identify the source file name and line number where the problem
is apparent.
Event
A description of a bus cycle which may include address, data, pass count, external
input, cycle type (fetch, R/W), and time stamp. Events are used to describe triggers,
breakpoints and interrupts.
Executable Code
Software that is ready to be loaded for execution.
Export
Send data out of the MPLAB IDE in a standardized format.
2010 Microchip Technology Inc.
DS51795B-page 81
PICkit™ 3 User’s Guide
Expressions
Combinations of constants and/or symbols separated by arithmetic or logical
operators.
Extended Microcontroller Mode
In extended microcontroller mode, on-chip program memory as well as external memory is available. Execution automatically switches to external if the program memory
address is greater than the internal memory space of the PIC18 device.
Extended Mode
In Extended mode, the compiler will utilize the extended instructions (i.e., ADDFSR,
ADDULNK, CALLW, MOVSF, MOVSS, PUSHL, SUBFSR and SUBULNK) and the indexed
with literal offset addressing.
External Label
A label that has external linkage.
External Linkage
A function or variable has external linkage if it can be referenced from outside the
module in which it is defined.
External Symbol
A symbol for an identifier which has external linkage. This may be a reference or a
definition.
External Symbol Resolution
A process performed by the linker in which external symbol definitions from all input
modules are collected in an attempt to resolve all external symbol references. Any
external symbol references which do not have a corresponding definition cause a linker
error to be reported.
External Input Line
An external input signal logic probe line (TRIGIN) for setting an event based upon
external signals.
External RAM
Off-chip Read/Write memory.
Fatal Error
An error that will halt compilation immediately. No further messages will be produced.
File Registers
On-chip data memory, including General Purpose Registers (GPRs) and Special
Function Registers (SFRs).
Filter
Determine by selection what data is included/excluded in a trace display or data file.
Flash
A type of EEPROM where data is written or erased in blocks instead of bytes.
FNOP
Forced No Operation. A forced NOP cycle is the second cycle of a two-cycle instruction.
Since the PIC microcontroller architecture is pipelined, it prefetches the next instruction
in the physical address space while it is executing the current instruction. However, if
the current instruction changes the program counter, this prefetched instruction is
explicitly ignored, causing a forced NOP cycle.
DS51795B-page 82
2010 Microchip Technology Inc.
Glossary
Frame Pointer
A pointer that references the location on the stack that separates the stack-based
arguments from the stack-based local variables. Provides a convenient base from
which to access local variables and other values for the current function.
Free-Standing
An implementation that accepts any strictly conforming program that does not use
complex types and in which the use of the features specified in the library clause (ANSI
‘89 standard clause 7) is confined to the contents of the standard headers <float.h>,
<iso646.h>, <limits.h>, <stdarg.h>, <stdbool.h>, <stddef.h> and
<stdint.h>.
GPR
General Purpose Register. The portion of device data memory (RAM) available for
general use.
Halt
A stop of program execution. Executing Halt is the same as stopping at a breakpoint.
Heap
An area of memory used for dynamic memory allocation where blocks of memory are
allocated and freed in an arbitrary order determined at runtime.
Hex Code
Executable instructions stored in a hexadecimal format code. Hex code is contained in
a hex file.
Hex File
An ASCII file containing hexadecimal addresses and values (hex code) suitable for
programming a device.
Hexadecimal
The base 16 numbering system that uses the digits 0-9 plus the letters A-F (or a-f). The
digits A-F represent hexadecimal digits with values of (decimal) 10 to 15. The rightmost
digit counts ones, the next counts multiples of 16, then 162 = 256, etc.
High Level Language
A language for writing programs that is further removed from the processor than
assembly.
ICD
In-Circuit Debugger. MPLAB ICD and PICkit (with Debug Express), are Microchip’s
in-circuit debuggers.
ICE
In-Circuit Emulator. MPLAB ICE 2000 and MPLAB ICE 4000 system are Microchip’s
classic in-circuit emulators. MPLAB REAL ICE system is Microchip’s next-generation
in-circuit emulator.
ICSP™
In-Circuit Serial Programming. A method of programming Microchip embedded
devices using serial communication and a minimum number of device pins.
IDE
Integrated Development Environment. MPLAB IDE is Microchip’s integrated
development environment.
Identifier
A function or variable name.
2010 Microchip Technology Inc.
DS51795B-page 83
PICkit™ 3 User’s Guide
IEEE
Institute of Electrical and Electronics Engineers.
Import
Bring data into the MPLAB IDE from an outside source, such as from a hex file.
Initialized Data
Data which is defined with an initial value. In C,
int myVar=5;
defines a variable which will reside in an initialized data section.
Instruction Set
The collection of machine language instructions that a particular processor
understands.
Instructions
A sequence of bits that tells a central processing unit to perform a particular operation
and can contain data to be used in the operation.
Internal Linkage
A function or variable has internal linkage if it can not be accessed from outside the
module in which it is defined.
International Organization for Standardization
An organization that sets standards in many businesses and technologies, including
computing and communications.
Interrupt
A signal to the CPU that suspends the execution of a running application and transfers
control to an Interrupt Service Routine (ISR) so that the event may be processed. Upon
completion of the ISR, normal execution of the application resumes.
Interrupt Handler
A routine that processes special code when an interrupt occurs.
Interrupt Request
An event which causes the processor to temporarily suspend normal instruction execution and to start executing an interrupt handler routine. Some processors have
several interrupt request events allowing different priority interrupts.
Interrupt Service Routine
ALU30, C18, C30 – A function that handles an interrupt.
IDE – User-generated code that is entered when an interrupt occurs. The location of
the code in program memory will usually depend on the type of interrupt that has
occurred.
Interrupt Vector
Address of an interrupt service routine or interrupt handler.
IRQ
See Interrupt Request.
ISO
See International Organization for Standardization.
ISR
See Interrupt Service Routine.
DS51795B-page 84
2010 Microchip Technology Inc.
Glossary
L-value
An expression that refers to an object that can be examined and/or modified. An l-value
expression is used on the left-hand side of an assignment.
Latency
The time between an event and its response.
Librarian
See Archiver.
Library
See Archive.
Linker
A language tool that combines object files and libraries to create executable code,
resolving references from one module to another.
Linker Script Files
Linker script files are the command files of a linker. They define linker options and
describe available memory on the target platform.
Listing Directives
Listing directives are those directives that control the assembler listing file format. They
allow the specification of titles, pagination and other listing control.
Listing File
A listing file is an ASCII text file that shows the machine code generated for each C
source statement, assembly instruction, assembler directive, or macro encountered in
a source file.
Little Endian
A data ordering scheme for multibyte data whereby the Least Significant Byte (LSB) is
stored at the lower addresses.
Local Label
A local label is one that is defined inside a macro with the LOCAL directive. These
labels are particular to a given instance of a macro’s instantiation. In other words, the
symbols and labels that are declared as local are no longer accessible after the ENDM
macro is encountered.
Logic Probes
Up to 14 logic probes can be connected to some Microchip emulators. The logic probes
provide external trace inputs, trigger output signal, +5V, and a common ground.
Loop-Back Test Board
Used to test the functionality of the MPLAB REAL ICE in-circuit emulator.
LVDS
Low Voltage Differential Signaling. A low noise, low-power, low amplitude method for
high-speed (gigabits per second) data transmission over copper wire.
LVDS differs from normal input/output (I/O) in a few ways:
Normal digital I/O works with 5 volts as a high (binary ‘1’) and 0 volts as a low (binary
‘0’). When you use a differential, you add a third option (-5 volts), which provides an
extra level with which to encode, and results in a higher maximum data transfer rate.
A higher data transfer rate means fewer wires are required, as in UW (Ultra Wide) and
UW-2/3 SCSI hard disks, which use only 68 wires. These devices require a high transfer rate over short distances. Using standard I/O transfer, SCSI hard drives would
require a lot more than 68 wires.
2010 Microchip Technology Inc.
DS51795B-page 85
PICkit™ 3 User’s Guide
Low voltage means that the standard 5 volts is replaced by either 3.3 volts or 1.5 volts.
LVDS uses a dual wire system, running 180 degrees of each other. This enables noise
to travel at the same level, which in turn can get filtered more easily and effectively.
With standard I/0 signaling, data storage is contingent upon the actual voltage level.
Voltage level can be affected by wire length (longer wires increase resistance, which
lowers voltage). But with LVDS, data storage is distinguished only by positive and negative voltage values, not the voltage level. Therefore, data can travel over greater
lengths of wire while maintaining a clear and consistent data stream.
Source: http://www.webopedia.com/TERM/L/LVDS.html.
Machine Code
The representation of a computer program that is actually read and interpreted by the
processor. A program in binary machine code consists of a sequence of machine
instructions (possibly interspersed with data). The collection of all possible instructions
for a particular processor is known as its “instruction set”.
Machine Language
A set of instructions for a specific central processing unit, designed to be usable by a
processor without being translated.
Macro
Macro instruction. An instruction that represents a sequence of instructions in abbreviated form.
Macro Directives
Directives that control the execution and data allocation within macro body definitions.
Makefile
Export to a file the instructions to Make the project. Use this file to Make your project
outside of MPLAB IDE, i.e., with a make.
Under Project>Build Options>Project, Directories tab, you must have selected
“Assemble/Compile/Link in the project directory” under “Build Directory Policy” for this
feature to work.
Make Project
A command that rebuilds an application, recompiling only those source files that have
changed since the last complete compilation.
MCU
Microcontroller Unit. An abbreviation for microcontroller. Also uC.
Memory Model
C30 – A representation of the memory available to the application.
C18 – A description that specifies the size of pointers that point to program memory.
Message
Text displayed to alert you to potential problems in language tool operation. A message
will not stop operation.
Microcontroller
A highly integrated chip that contains a CPU, RAM, program memory, I/O ports and
timers.
Microcontroller Mode
One of the possible program memory configurations of PIC18 microcontrollers. In
microcontroller mode, only internal execution is allowed. Thus, only the on-chip program memory is available in microcontroller mode.
DS51795B-page 86
2010 Microchip Technology Inc.
Glossary
Microprocessor Mode
One of the possible program memory configurations of PIC18 microcontrollers. In
microprocessor mode, the on-chip program memory is not used. The entire program
memory is mapped externally.
Mnemonics
Text instructions that can be translated directly into machine code. Also referred to as
opcodes.
MPASM™ Assembler
Microchip Technology’s relocatable macro assembler for PIC microcontroller devices,
KEELOQ® devices and Microchip memory devices.
MPLAB Language Tool for Device
Microchip’s C compilers, assemblers and linkers for specified devices. Select the type
of language tool based on the device you will be using for your application, e.g., if you
will be creating C code on a PIC18 MCU, select the MPLAB C Compiler for PIC18
MCUs.
MPLAB ICD
Microchip’s in-circuit debuggers that work with MPLAB IDE. The ICDs supports Flash
devices with built-in debug circuitry. The main component of each ICD is the pod. A
complete system consists of a pod, header board (with a device-ICD), target board,
cables, and MPLAB IDE software.
MPLAB ICE 2000/4000
Not recommended for new designs. See the MPLAB REAL ICE in-circuit
emulator.
Microchip’s classic in-circuit emulators that work with MPLAB IDE. MPLAB ICE 2000
supports 8-bit PIC MCUs. MPLAB ICE 4000 supports PIC18F and PIC24 MCUs and
dsPIC DSCs. The main component of each ICE is the pod. A complete system consists
of a pod, processor module, cables, and MPLAB IDE software.
MPLAB IDE
Microchip’s Integrated Development Environment. MPLAB IDE comes with an editor,
project manager and simulator.
MPLAB PM3
A device programmer from Microchip. Programs PIC18 microcontrollers and dsPIC
digital signal controllers. Can be used with MPLAB IDE or stand-alone. Replaces
PRO MATE II.
MPLAB REAL ICE™ In-Circuit Emulator
Microchip’s next-generation in-circuit emulators that works with MPLAB IDE. The
MPLAB REAL ICE emulator supports PIC MCUs and dsPIC DSCs. The main component of each ICE is the pod. A complete system consists of a pod, a driver (and potentially a receiver) card, cables, and MPLAB IDE software.
MPLAB SIM
Microchip’s simulator that works with MPLAB IDE in support of PIC MCU and dsPIC
DSC devices.
MPLIB™ Object Librarian
Microchip’s librarian that can work with MPLAB IDE. MPLIB librarian is an object librarian for use with COFF object modules created using either MPASM assembler (mpasm
or mpasmwin v2.0) or MPLAB C18 C compiler.
2010 Microchip Technology Inc.
DS51795B-page 87
PICkit™ 3 User’s Guide
MPLINK™ Object Linker
MPLINK linker is an object linker for the Microchip MPASM assembler and the Microchip C18 C compiler. MPLINK linker also may be used with the Microchip MPLIB librarian. MPLINK linker is designed to be used with MPLAB IDE, though it does not have to
be.
MRU
Most Recently Used. Refers to files and windows available to be selected from MPLAB
IDE main pull down menus.
Native Data Size
For Native trace, the size of the variable used in a Watch window must be of the same
size as the selected device’s data memory: bytes for PIC18 devices and words for
16-bit devices.
Nesting Depth
The maximum level to which macros can include other macros.
Node
MPLAB IDE project component.
Non-Extended Mode
In Non-Extended mode, the compiler will not utilize the extended instructions nor the
indexed with literal offset addressing.
Non Real Time
Refers to the processor at a breakpoint or executing single-step instructions or MPLAB
IDE being run in simulator mode.
Non-Volatile Storage
A storage device whose contents are preserved when its power is off.
NOP
No Operation. An instruction that has no effect when executed except to advance the
program counter.
Object Code
The machine code generated by an assembler or compiler.
Object File
A file containing machine code and possibly debug information. It may be immediately
executable or it may be relocatable, requiring linking with other object files, e.g.,
libraries, to produce a complete executable program.
Object File Directives
Directives that are used only when creating an object file.
Octal
The base 8 number system that only uses the digits 0-7. The rightmost digit counts
ones, the next digit counts multiples of 8, then 82 = 64, etc.
Off-Chip Memory
Off-chip memory refers to the memory selection option for the PIC18 device where
memory may reside on the target board, or where all program memory may be supplied
by the emulator. The Memory tab accessed from Options>Development Mode provides the Off-Chip Memory selection dialog box.
DS51795B-page 88
2010 Microchip Technology Inc.
Glossary
One-to-One Project-Workspace Model
The most common configuration for application development in MPLAB IDE to is have
one project in one workspace. Select Configure>Settings, Projects tab and check “Use
one-to-one project-workspace model”.
Opcodes
Operational Codes. See Mnemonics.
Operators
Symbols, like the plus sign ‘+’ and the minus sign ‘-’, that are used when forming
well-defined expressions. Each operator has an assigned precedence that is used to
determine order of evaluation.
OTP
One Time Programmable. EPROM devices that are not in windowed packages. Since
EPROM needs ultraviolet light to erase its memory, only windowed devices are erasable.
Pass Counter
A counter that decrements each time an event (such as the execution of an instruction
at a particular address) occurs. When the pass count value reaches zero, the event is
satisfied. You can assign the Pass Counter to break and trace logic, and to any
sequential event in the complex trigger dialog.
PC
Personal Computer or Program Counter.
PC Host
Any PC running a supported Windows operating system.
Persistent Data
Data that is never cleared or initialized. Its intended use is so that an application can
preserve data across a device reset.
Phantom Byte
An unimplemented byte in the dsPIC architecture that is used when treating the 24-bit
instruction word as if it were a 32-bit instruction word. Phantom bytes appear in dsPIC
hex files.
PIC MCUs
PIC microcontrollers (MCUs) refers to all Microchip microcontroller families.
PICkit 1, 2, and 3
Microchip’s developmental device programmers with debug capability through Debug
Express. See the Readme files for each tool to see which devices are supported.
PICSTART Plus
A developmental device programmer from Microchip. Programs 8-, 14-, 28-, and 40-pin
PIC microcontrollers. Must be used with MPLAB IDE software.
Plug-ins
The MPLAB IDE has both built-in components and plug-in modules to configure the
system for a variety of software and hardware tools. Several plug-in tools may be found
under the Tools menu.
2010 Microchip Technology Inc.
DS51795B-page 89
PICkit™ 3 User’s Guide
Pod
MPLAB REAL ICE system: The box that contains the emulation control circuitry for the
ICE device on the header or target board. An ICE device can be a production device
with built-in ICE circuitry or a special ICE version of a production device (i.e.,
device-ICE).
MPLAB ICD: The box that contains the debug control circuitry for the ICD device on the
header or target board. An ICD device can be a production device with built-in ICD circuitry or a special ICD version of a production device (i.e., device-ICD).
MPLAB ICE 2000/4000: The external emulator box that contains emulation memory,
trace memory, event and cycle timers, and trace/breakpoint logic.
Power-on-Reset Emulation
A software randomization process that writes random values in data RAM areas to
simulate uninitialized values in RAM upon initial power application.
Pragma
A directive that has meaning to a specific compiler. Often a pragma is used to convey
implementation-defined information to the compiler. MPLAB C30 uses attributes to
convey this information.
Precedence
Rules that define the order of evaluation in expressions.
PRO MATE II
No longer in Production. See the MPLAB PM3 device programmer.
A device programmer from Microchip. Programs most PIC microcontrollers as well as
most memory and KEELOQ devices. Can be used with MPLAB IDE or stand-alone.
Production Programmer
A production programmer is a programming tool that has resources designed in to program devices rapidly. It has the capability to program at various voltage levels and completely adheres to the programming specification. Programming a device as fast as
possible is of prime importance in a production environment where time is of the
essence as the application circuit moves through the assembly line.
Microchip production programmers, such as MPLAB PM3, MPLAB REAL ICE in-circuit
emulator, and MPLAB ICD 3, have been designed with robustness in mind to tolerate
these demanding environments.
Some top-end tools have additional accessories. The MPLAB REAL ICE Performance
Pak has accelerators to speed up the communication and In-Circuit Serial Programming (ICSP) process. The MPLAB PM3 programmer has interchangeable socket modules to support various devices out-of-circuit.
Profile
For MPLAB SIM simulator, a summary listing of executed stimulus by register.
Program Counter
The location that contains the address of the instruction that is currently executing.
Program Counter Unit
ALU30 – A conceptual representation of the layout of program memory. The program
counter increments by 2 for each instruction word. In an executable section, 2 program
counter units are equivalent to 3 bytes. In a read-only section, 2 program counter units
are equivalent to 2 bytes.
DS51795B-page 90
2010 Microchip Technology Inc.
Glossary
Program Memory
IDE – The memory area in a device where instructions are stored. Also, the memory in
the emulator or simulator containing the downloaded target application firmware.
ALU30, C30 – The memory area in a device where instructions are stored.
Project
A project contains the files needed to build an application (source code, linker script
files, etc.) along with their associations to various build tools and build options.
Prologue
A portion of compiler-generated code that is responsible for allocating stack space, preserving registers and performing any other machine-specific requirement specified in
the runtime model. This code executes before any user code for a given function.
Prototype System
A term referring to a user's target application, or target board.
PWM Signals
Pulse Width Modulation Signals. Certain PIC MCU devices have a PWM peripheral.
Qualifier
An address or an address range used by the Pass Counter or as an event before
another operation in a complex trigger.
Radix
The number base, hex, or decimal, used in specifying an address.
RAM
Random Access Memory (Data Memory). Memory in which information can be
accessed in any order.
Raw Data
The binary representation of code or data associated with a section.
Read Only Memory
Memory hardware that allows fast access to permanently stored data but prevents
addition to or modification of the data.
Real Time
When an in-circuit emulator or debugger is released from the halt state, the processor
runs in Real Time mode and behaves exactly as the normal chip would behave. In Real
Time mode, the real time trace buffer of an emulator is enabled and constantly captures
all selected cycles, and all break logic is enabled. In an in-circuit emulator or debugger,
the processor executes in real time until a valid breakpoint causes a halt, or until the
user halts the execution.
In the simulator, real time simply means execution of the microcontroller instructions as
fast as they can be simulated by the host CPU.
Real-Time Watch
A Watch window where the variables change in real-time as the application is run. See
individual tool documentation to determine how to set up a real-time watch. Not all tools
support real-time watches.
Recursive Calls
A function that calls itself, either directly or indirectly.
2010 Microchip Technology Inc.
DS51795B-page 91
PICkit™ 3 User’s Guide
Recursion
The concept that a function or macro, having been defined, can call itself. Great care
should be taken when writing recursive macros; it is easy to get caught in an infinite
loop where there will be no exit from the recursion.
Reentrant
A function that may have multiple, simultaneously active instances. This may happen
due to either direct or indirect recursion or through execution during interrupt
processing.
Relaxation
The process of converting an instruction to an identical, but smaller instruction. This is
useful for saving on code size. MPLAB ASM30 currently knows how to RELAX a CALL
instruction into an RCALL instruction. This is done when the symbol that is being called
is within +/- 32k instruction words from the current instruction.
Relocatable
An object whose address has not been assigned to a fixed location in memory.
Relocatable Section
ALU30 – A section whose address is not fixed (absolute). The linker assigns addresses
to relocatable sections through a process called relocation.
Relocation
A process performed by the linker in which absolute addresses are assigned to relocatable sections and all symbols in the relocatable sections are updated to their new
addresses.
ROM
Read Only Memory (Program Memory). Memory that cannot be modified.
Run
The command that releases the emulator from halt, allowing it to run the application
code and change or respond to I/O in real time.
Run-time Model
Describes the use of target architecture resources.
Scenario
For MPLAB SIM simulator, a particular setup for stimulus control.
Section
A portion of an application located at a specific address of memory.
Section Attribute
A characteristic ascribed to a section (e.g., an access section).
Sequenced Breakpoints
Breakpoints that occur in a sequence. Sequence execution of breakpoints is
bottom-up; the last breakpoint in the sequence occurs first.
Serialized Quick Turn Programming
Serialization allows you to program a serial number into each microcontroller device
that the Device Programmer programs. This number can be used as an entry code,
password or ID number.
SFR
See Special Function Registers.
DS51795B-page 92
2010 Microchip Technology Inc.
Glossary
Shell
The MPASM assembler shell is a prompted input interface to the macro assembler.
There are two MPASM assembler shells: one for the DOS version and one for the
Windows version.
Simulator
A software program that models the operation of devices.
Single Step
This command steps though code, one instruction at a time. After each instruction,
MPLAB IDE updates register windows, watch variables, and status displays so you can
analyze and debug instruction execution. You can also single step C compiler source
code, but instead of executing single instructions, MPLAB IDE will execute all assembly
level instructions generated by the line of the high level C statement.
Skew
The information associated with the execution of an instruction appears on the processor bus at different times. For example, the executed opcodes appears on the bus as
a fetch during the execution of the previous instruction, the source data address and
value and the destination data address appear when the opcodes is actually executed,
and the destination data value appears when the next instruction is executed. The trace
buffer captures the information that is on the bus at one instance. Therefore, one trace
buffer entry will contain execution information for three instructions. The number of captured cycles from one piece of information to another for a single instruction execution
is referred to as the skew.
Skid
When a hardware breakpoint is used to halt the processor, one or more additional
instructions may be executed before the processor halts. The number of extra
instructions executed after the intended breakpoint is referred to as the skid.
Source Code
The form in which a computer program is written by the programmer. Source code is
written in a formal programming language which can be translated into machine code
or executed by an interpreter.
Source File
An ASCII text file containing source code.
Special Function Registers
The portion of data memory (RAM) dedicated to registers that control I/O processor
functions, I/O status, timers or other modes or peripherals.
SQTP
See Serialized Quick Turn Programming.
Stack, Hardware
Locations in PIC microcontroller where the return address is stored when a function call
is made.
Stack, Software
Memory used by an application for storing return addresses, function parameters, and
local variables. This memory is typically managed by the compiler when developing
code in a high-level language.
MPLAB Starter Kit for Device
Microchip’s starter kits contains everything needed to begin exploring the specified
device. View a working application and then debug and program you own changes.
2010 Microchip Technology Inc.
DS51795B-page 93
PICkit™ 3 User’s Guide
Static RAM or SRAM
Static Random Access Memory. Program memory you can read/write on the target
board that does not need refreshing frequently.
Status Bar
The Status Bar is located on the bottom of the MPLAB IDE window and indicates such
current information as cursor position, development mode and device, and active tool
bar.
Step Into
This command is the same as Single Step. Step Into (as opposed to Step Over) follows
a CALL instruction into a subroutine.
Step Over
Step Over allows you to debug code without stepping into subroutines. When stepping
over a CALL instruction, the next breakpoint will be set at the instruction after the CALL.
If for some reason the subroutine gets into an endless loop or does not return properly,
the next breakpoint will never be reached. The Step Over command is the same as
Single Step except for its handling of CALL instructions.
Step Out
Step Out allows you to step out of a subroutine which you are currently stepping
through. This command executes the rest of the code in the subroutine and then stops
execution at the return address to the subroutine.
Stimulus
Input to the simulator, i.e., data generated to exercise the response of simulation to
external signals. Often the data is put into the form of a list of actions in a text file.
Stimulus may be asynchronous, synchronous (pin), clocked and register.
Stopwatch
A counter for measuring execution cycles.
Storage Class
Determines the lifetime of the memory associated with the identified object.
Storage Qualifier
Indicates special properties of the objects being declared (e.g., const).
Symbol
A symbol is a general purpose mechanism for describing the various pieces which
comprise a program. These pieces include function names, variable names, section
names, file names, struct/enum/union tag names, etc. Symbols in MPLAB IDE refer
mainly to variable names, function names and assembly labels. The value of a symbol
after linking is its value in memory.
Symbol, Absolute
Represents an immediate value such as a definition through the assembly .equ
directive.
System Window Control
The system window control is located in the upper left corner of windows and some dialogs. Clicking on this control usually pops up a menu that has the items “Minimize,”
“Maximize,” and “Close.”
Target
Refers to user hardware.
DS51795B-page 94
2010 Microchip Technology Inc.
Glossary
Target Application
Software residing on the target board.
Target Board
The circuitry and programmable device that makes up the target application.
Target Processor
The microcontroller device on the target application board.
Template
Lines of text that you build for inserting into your files at a later time. The MPLAB Editor
stores templates in template files.
Tool Bar
A row or column of icons that you can click on to execute MPLAB IDE functions.
Trace
An emulator or simulator function that logs program execution. The emulator logs program execution into its trace buffer which is uploaded to MPLAB IDE’s trace window.
Trace Memory
Trace memory contained within the emulator. Trace memory is sometimes called the
trace buffer.
Trace Macro
A macro that will provide trace information from emulator data. Since this is a software
trace, the macro must be added to code, the code must be recompiled or reassembled,
and the target device must be programmed with this code before trace will work.
Trigger Output
Trigger output refers to an emulator output signal that can be generated at any address
or address range, and is independent of the trace and breakpoint settings. Any number
of trigger output points can be set.
Trigraphs
Three-character sequences, all starting with ??, that are defined by ISO C as
replacements for single characters.
Unassigned Section
A section which has not been assigned to a specific target memory block in the linker
command file. The linker must find a target memory block in which to allocate an
unassigned section.
Uninitialized Data
Data which is defined without an initial value. In C,
int myVar;
defines a variable which will reside in an uninitialized data section.
Upload
The Upload function transfers data from a tool, such as an emulator or programmer, to
the host PC or from the target board to the emulator.
USB
Universal Serial Bus. An external peripheral interface standard for communication
between a computer and external peripherals over a cable using bi-serial transmission.
USB 1.0/1.1 supports data transfer rates of 12 Mbps. Also referred to as high-speed
USB, USB 2.0 supports data rates up to 480 Mbps.
2010 Microchip Technology Inc.
DS51795B-page 95
PICkit™ 3 User’s Guide
Vector
The memory locations that an application will jump to when either a Reset or interrupt
occurs.
Warning
IDE – An alert that is provided to warn you of a situation that would cause physical damage to a device, software file, or equipment.
ALU30, C30 – Warnings report conditions that may indicate a problem, but do not halt
processing. In MPLAB C30, warning messages report the source file name and line
number, but include the text ‘warning:’ to distinguish them from error messages.
Watch Variable
A variable that you may monitor during a debugging session in a Watch window.
Watch Window
Watch windows contain a list of watch variables that are updated at each breakpoint.
Watchdog Timer
A timer on a PIC microcontroller that resets the processor after a selectable length of
time. The WDT is enabled or disabled and set up using Configuration bits.
WDT
See Watchdog Timer.
Workbook
For MPLAB SIM stimulator, a setup for generation of SCL stimulus.
WorkSpace
A workspace contains MPLAB IDE information on the selected device, selected debug
tool and/or programmer, open windows and their location, and other IDE configuration
settings.
DS51795B-page 96
2010 Microchip Technology Inc.
PICkit™ 3 USER’S GUIDE
Index
Numerics
G
44-Pin Demo Board ................................................. 33
General Corrective Actions ...................................... 52
A
H
Abort Operation...................................................58, 63
Animate .................................................................... 57
Halt........................................................................... 57
Hibernate mode.................................................. 46, 70
Hubs, USB ............................................................... 70
B
Blank Check ............................................................. 63
Breakpoints
Dialog................................................................ 59
Enabling............................................................ 59
Setup ................................................................ 58
Build Configuration..............................................24, 43
C
Cables
Length ..........................................................70, 73
Capacitors ...........................................................20, 21
CD-ROM .................................................................. 16
Circuits That Will Prevent the Debugger
From Functioning ................................................. 21
Code Protect ............................................................ 22
CodeGuard Security ................................................ 67
Configuration Bits................................................22, 30
Connector, 6-Pin ...................................................... 14
Customer Notification Service.................................... 9
Customer Support .................................................... 10
D
Debug
Executive .......................................................... 24
Registers........................................................... 24
Debug Express ........................................................ 33
Debug Mode
Sequence of Operations ................................... 23
Debug Read............................................................. 58
Debug, Top Reasons Why You Can’t ...................... 43
Documentation
Conventions ........................................................ 7
Layout ................................................................. 6
Download Firmware ................................................. 65
Driver Board
Standard ........................................................... 71
Durability, Card Guide.............................................. 70
E
Erase........................................................................ 63
Erase Flash Device .................................................. 58
F
Firmware Downloads ............................................... 65
Freeze on Halt ......................................................... 46
2010 Microchip Technology Inc.
I
ICD Headers ............................................................ 16
ICSP........................................................22, 23, 24, 71
ICSPCLK.................................................................. 71
ICSPDAT.................................................................. 71
Indicator Lights......................................................... 70
Internet Address, Microchip ....................................... 9
L
LEDs .................................................................. 15, 70
M
Modular Interface Cable........................................... 22
MPLAB IDE .............................................................. 25
P
PC, Power Down................................................ 46, 70
PGC .................................................. 19, 20, 21, 22, 23
PGD .................................................. 19, 20, 21, 22, 23
PICkit 3 Components ............................................... 16
PICkit 3 Debug Express Kit...................................... 16
PICkit 3 Defined ....................................................... 13
PIM........................................................................... 18
PK3Err0001.............................................................. 49
PK3Err0002.............................................................. 49
PK3Err0003.............................................................. 49
PK3Err0006.............................................................. 49
PK3Err0007.............................................................. 49
PK3Err0008.............................................................. 49
PK3Err0009.............................................................. 49
PK3Err0010.............................................................. 49
PK3Err0011.............................................................. 49
PK3Err0012.............................................................. 50
PK3Err0013.............................................................. 50
PK3Err0014.............................................................. 50
PK3Err0015.............................................................. 50
PK3Err0016.............................................................. 50
PK3Err0017.............................................................. 50
PK3Err0018.............................................................. 50
PK3Err0019.............................................................. 50
PK3Err0020.............................................................. 50
PK3Err0021.............................................................. 50
PK3Err0022.............................................................. 50
PK3Err0023.............................................................. 50
DS51795B-page 97
PICkit™ 3 User’s Guide
PK3Err0024.............................................................. 50
PK3Err0025.............................................................. 50
PK3Err0026.............................................................. 50
PK3Err0027.............................................................. 50
PK3Err0028.............................................................. 50
PK3Err0029.............................................................. 51
PK3Err0030.............................................................. 51
PK3Err0031.............................................................. 51
PK3Err0032.............................................................. 51
PK3Err0033.............................................................. 51
PK3Err0034.............................................................. 51
PK3Err0035.............................................................. 51
PK3Err0036.............................................................. 51
PK3Err0037.............................................................. 51
PK3Err0038.............................................................. 51
PK3Err0039.............................................................. 51
PK3Err0040.............................................................. 51
PK3Err0041.............................................................. 51
PK3Err0043.............................................................. 51
PK3Err0044.............................................................. 51
PK3Err0045.............................................................. 51
PK3Err0046.............................................................. 51
PK3Err0047.............................................................. 52
PK3Err0052.............................................................. 52
PK3Err0053.............................................................. 52
PK3Err0054.............................................................. 52
PK3Err0055.............................................................. 52
PK3Err0056.............................................................. 52
PK3Err0063.............................................................. 52
PK3Err0068.............................................................. 52
PK3Err0069.............................................................. 52
PK3Err0070.............................................................. 52
PK3Err0071.............................................................. 52
PK3Err0072.............................................................. 52
PK3Err0073.............................................................. 52
PK3Err0075.............................................................. 52
Power-Down mode............................................. 46, 70
Processor Extension Kits ......................................... 16
Program ............................................................. 58, 63
Project Wizard .......................................................... 30
Pull-ups .................................................................... 21
T
Table Read Protect .................................................. 22
Target Connection
Circuitry ............................................................. 19
Improper Circuits............................................... 21
Standard............................................................ 19
Target Device ........................................................... 22
Transition Socket...................................................... 16
Specification...................................................... 26
U
USB .................................................................... 70, 95
Cables ............................................................... 16
Hubs.................................................................. 70
USB Port .................................................................. 14
V
Vcap ......................................................................... 20
Vdd ..........................................................19, 20, 21, 22
Verify ........................................................................ 63
Vpp .................................................... 19, 20, 21, 22, 23
Vss ..........................................................19, 20, 21, 22
W
Warranty Registration................................................. 8
Watchdog Timer ................................................. 22, 96
Web Site, Microchip ................................................... 9
R
Read................................................................... 58, 63
Reading, Recommended............................................ 8
Readme...................................................................... 8
Reconnect .......................................................... 58, 63
Reserved Resources by Device ............................... 24
Reset
Processor .......................................................... 58
Resistors .................................................................. 21
Run........................................................................... 57
S
Secure Segments..................................................... 67
Standard Communication
Connections ...................................................... 19
Driver Board ...................................................... 71
Standard ICSP Device Communication ................... 17
Step .......................................................................... 57
DS51795B-page 98
2010 Microchip Technology Inc.
PICkit™ 3 User’s Guide
NOTES:
2010 Microchip Technology Inc.
DS51795B-page 99
WORLDWIDE SALES AND SERVICE
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://support.microchip.com
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Kokomo
Kokomo, IN
Tel: 765-864-8360
Fax: 765-864-8387
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8528-2100
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Taiwan - Hsin Chu
Tel: 886-3-6578-300
Fax: 886-3-6578-370
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Taiwan - Kaohsiung
Tel: 886-7-536-4818
Fax: 886-7-536-4803
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
01/05/10
DS51795B-page 100
2010 Microchip Technology Inc.