EMC&PFC Choke Coil<Pin Type: PFN Series> Type: PFN2029 ◆ Product Description ・￠30.0mm×35.5mm.MAX. ・Custom design is available ◆ Feature ・Iron dust core is used to realize better DC Saturation characteristics and higher noise absorption effect. ・Less leakage magnetic flux . ・Ideally used as Normal Mode chokes EMI suppression in power supplies or signal lines. ・Ideally used as Power Factor Correction choke ・Elimination for impulse noise. φ30.0 MAX. ・RoHS Compliance ◆ Dimensions (mm) SOLDER 10.0 . X A M 5 . 5 3 SOLDER φ1.10 MAX. 24.0 MAX. ADHESIVE ◆ Specification (For EMC application) 16.0 21.0 MAX. Sample No. Inductance (μH) [MIN.] At 1kHz D.C.R.(mΩ) [MAX.] (at20℃) Rated Current (A)※1 PFN2Ø29NP-NM42A 52 30 6.1 PFN2Ø29NP-NM53A 83 38 5.4 ※ Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃). ◆ Specification (For PFC application) Sample No. Inductance(μH) At 1kHz D.C.R. (mΩ) [MAX.] (at20℃) Rated Current (A)※ 5342-T010 10.0±20% 8.5 10.0 ※ Rated current: The DC current at which the inductance decreases to 90 % of it’s initial value or when △t=40℃, whichever is lower(Ta=20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1