SMD POWER INDUCTORS SDC1002 SERIES 1. PART NO. EXPRESSION : SDC1002R80YZF (a) (b) (c) (d)(e)(f) (a) Series code (d) Tolerance code : Y = ±30% (b) Dimension code (e) X, Y, Z : Standard part (c) Inductance code : R80 = 0.80uH (f) F : RoHS Compliant 2. CONFIGURATION & DIMENSIONS : B C D F 100 G PCB Pattern Unit:m/m E A I H I A B C D E F 10.2±0.30 10.0±0.30 2.80±0.30 3.00±0.10 1.20±0.15 7.70±0.30 G H I 7.30 Ref. 3.20 Ref. 1.60 Ref. 3. SCHEMATIC : 4. MATERIALS : g (a) Core : DR Ferrite Core a (b) Core : RI Ferrite Core f b (c) Wire : Enamelled Copper Wire (d) Terminal : Au+Ni Copper Plate c (e) Adhesive : Epoxy (f) Adhesive : Epoxy e d (g) Ink : Bon Margue 5. GENERAL SPECIFICATION : a) ǻL/L0A=35% Typ. at Isat b) Temp. rise : 40°C Typ. at Irms c) Storage temp. : -40°C to +125°C d) Operating temp. : -40°C to +85°C e) Resistance to solder heat : 260°C.10 secs NOTE : Specifications subject to change without notice. Please check our website for latest information. 31.03.2009 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 SMD POWER INDUCTORS SDC1002 SERIES 6. ELECTRICAL CHARACTERISTICS : Part No. Inductance ( µH ) Test Freq. ( Hz ) RDC ( mȍ ) Max. Isat (A) Irms (A) SDC1002R80YZF 0.80±30% 1V/100K 12.00 11.20 7.00 SDC10021R5YZF 1.50±30% 1V/100K 15.00 8.00 6.00 SDC10022R2YZF 2.20±30% 1V/100K 18.00 7.00 5.50 SDC10023R3YZF 3.30±30% 1V/100K 25.00 5.60 4.80 SDC10024R7YZF 4.70±30% 1V/100K 32.00 5.00 4.20 SDC10026R8YZF 6.80±30% 1V/100K 42.00 4.00 3.60 SDC10028R2YZF 8.20±30% 1V/100K 50.00 3.50 3.10 SDC1002100YZF 10.00±30% 1V/100K 65.00 3.00 2.80 SDC1002150YZF 15.00±30% 1V/100K 100.00 2.70 2.10 SDC1002220YZF 22.00±30% 1V/100K 140.00 2.20 1.70 SDC1002330YZF 33.00±30% 1V/100K 205.00 1.75 1.50 SDC1002470YZF 47.00±30% 1V/100K 300.00 1.45 1.20 SDC1002560YZF 56.00±30% 1V/100K 340.00 1.40 1.15 SDC1002680YZF 68.00±30% 1V/100K 450.00 1.25 1.00 SDC1002820YZF 82.00±30% 1V/100K 510.00 1.15 0.90 SDC1002101YZF 100.00±30% 1V/100K 580.00 1.05 0.80 SDC1002121YZF 120.00±30% 1V/100K 650.00 0.90 0.70 SDC1002151YZF 150.00±30% 1V/100K 910.00 0.85 0.60 NOTE : Specifications subject to change without notice. Please check our website for latest information. 31.03.2009 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 SMD POWER INDUCTORS SDC1002 SERIES RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS 10s max. 255°C Natural cooling 230°C 180°C 150°C Pre-heating 40s max. 90 to 120s 7. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE N ØC B A 2.0±0.5 ØC D G EMBOSSED CARRIER * CARRIER TAPE WIDTH : D P:16 m/m 4 m/m 100 100 100 100 100 100 100 100 ( 2 ) DIMENSIONS Unit:m/m STYLE A B C D G 13-24 330 21±0.8 13 24 26 T N +0 50 -0 30.4 ( 3 ) Q'TY & G.W. PER PACKAGE INNER : REEL SERIES SDC1002 OUTER : CARTON Q'TY (PCS) G.W. (gw) STYLE Q'TY (PCS) G.W. (Kg) SIZE (cm) 1000 1000 13-24 4000 7.5 40 x 40 x 24 NOTE : Specifications subject to change without notice. Please check our website for latest information. 31.03.2009 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 SMD POWER INDUCTORS SDC1002 SERIES 8. RELIABILTY AND TEST CONDITION : TEST ITEM SPECIFICATION SOLDERABILITY TEST CONDITION MORE THAN 90% OF THE PREHEAT : 125±25°C FOR 60 SECONDS TERMINAL ELECTRODE SOLDER : 99%Sn/0.3%Ag/0.7Cu OR EQUIVALENT SHALL BE COVERED SOLDER TEMP. : 245±5°C WITH FRESH SOLDER. FLUX : ROSIN DIP TIME : 4±1 SECONDS THERMAL SHOCK INDUCTANCE SHALL ROOM TEMP. -25±2°C TEST NOT CHANGE MORE 15 MINUTES 30 MINUTES THAN ±20% ( TEMP. CYCLE ) ROOM TEMP. 85±2°C 15 MINUTES 30 MINUTES TOTAL : 50 CYCLES HUMIDITY TEMPERATURE : 40±2°C RESISTANCE TEST HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS HIGH TEMP. TEMPERATURE : 85±2°C RESISTANCE TEST APPLIED CURRENT : PER SPEC. TIME : 500 HOURS 9. UL CARD : GUANGDONG CHINA Mtl Dsg BC Coating Type TC __ __ __ ANSI Type __ TI NOTE : Specifications subject to change without notice. Please check our website for latest information. 31.03.2009 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4