TRUMPower 200 WATT MEDICAL POWER SUPPLIES D E SCR IPTION TM200 SERIES (MDD) Comprising single and multiple output models with 200 watts of continuous output power, the TM200 series is specially designed for medical applications. Auto-ranging input allows them to operate from any line voltage throughout the world without a selector strap. All auxiliary outputs are with magnetic amplifier or linear regulator to keep regulation. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover-and-fan assembly can be added during manufacturing. Saf et y Sta n da rd A ppr o va ls: F EATU R E S ‧ ‧ ‧ ‧ ‧ ‧ ‧ Low safety ground leakage current M e e t E N 5 5 0 11 a n d F C C c l a s s B Auto-ranging input Short-circuit protection with auto-recovery Pow er Fail Detect（ PFD） signal 100% burn-in at full rated load Optional cover-and-fan assembly UL 2601-1 CSA C22.2 No. 601.1 TÜV EN60601-1 IN PUT S PE C IF ICAT ION S E N V IR O N M ENTA L SP E C IF ICATI O N S I n p u t v o l ta g e : Operating temperature: Storage temperature: Relative humidity: Derating: Input frequency: Input current: Leakage current: 9 0 t o 1 3 0 VA C , o r 1 8 0 t o 2 6 4 VA C （ a u t o - r a n g i n g ） 47 to 63 Hz 4 . 5 A （ r m s ） f o r 11 5 VA C 2 . 6 A （ r m s ） f o r 2 3 0 VA C 9 0 µ A m a x . @ 11 5 VA C , 6 0 H z 1 5 µ A m a x . @ 2 3 0 VA C , 5 0 H z Cooling: 0ºC to +70ºC -40ºC to +85ºC 5% to 95% non-condensing Derate from 100% at +50ºC linearly to 50% at +70ºC 2 5 C F M f o r c e d a i r, p r o v i d e d on covered version, to be provided f o r U - b r a c k e t version by user OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS Output voltage/current： See rating chart Switching frequency： Efficiency： Hold-up time： Line regulation： Inrush current： Total output power： 200 watts maximum Ripple and noise： 2% peak to peak maximum Overvoltage protection： Provided on output #1 only; set at 112 – 132% of its nominal output voltage Overcurrent protection： All outputs protected to short circuit conditions Temperature coefficient：All outputs ±0.04%/ºC maximum Transient response： Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500µs after a 25% step load change PFD signal： TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1 ms prior to +5V output dropping 5% below its nominal value. This signal also provides a minimum delay of 100 ms after +5V is within regulation. 64KHz ±5KHz 70% minimum on all models 12 msec minimum at 110VAC ±0.5% maximum at full load 20 amps @ 115VAC, or 40 amps @ 230VAC, at 25ºC cold start Withstand voltage： 4000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF： 450,000 hours at full load at 25ºC ambient, calculated per MIL-HDBK-217F EMC Performance (EN60601-1-2: 2 0 0 1 ) E N 5 5 0 11 : Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ±8KV air and ±4KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ±1KV EN61000-4-5: Surge, ±1KV diff, ±2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 1A/m E N 6 1 0 0 0 - 4 - 11 : Voltage dips, 30% reduction for 500ms and >95% reduction for 10ms Interruptions, >95% for 5000ms Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com MEDICAL GRADE TM200 SERIES OUTPUT VOLTAGE/CURRENT RATING CHART Product No. TM200-S05 TM200-S12 TM200-S15 TM200-S24 TM200-S30 TM200-S48 TM200-D23 TM200-D24 TM200-D25 TM200-T30 TM200-T31 TM200-T32 TM200-T33 TM200-Q40 TM200-Q41 TM200-Q42 TM200-Q44 TM200-Q45 Notes: Vnom. 5V 12V 15V 24V 30V 48V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V +5V Output #1 Imin. Imax. Tol. 3.0A 40A 2% 1.2A 16.7A 2% 1.0A 13.4A 2% 0.6A 8.4A 2% 0.5A 6.7A 2% 0.5A 4.2A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% 3.0A 30A 2% Output #2 Vnom. Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) +12V 0A 8A +15V 0A 6A +24V 0A 4A +12V 0A 8A +12V 0A 8A +15V 0A 6A +15V 0A 6A +12V 0A 8A +15V 0A 6A +12V 0A 8A +12V 0A 8A +12V 0A 8A Tol. 4% 4% 4% 4% 4% 4% 4% 4% 4% 4% 4% 4% Output #3 Vnom. Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) -5V 0A 6A -12V 0A 4A -15V 0A 4A -12V 0A 4A -12V 0A 4A -15V 0A 4A -12V 0A 4A -15V 0A 4A -12V 0A 4A Tol. 4% 4% 4% 4% 4% 4% 4% 4% 4% Output #4 Vnom. Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 5V 0A 6A 24V 0A 4A 12V 0A 4A 15V 0A 4A 24V 0A 4A Tol. 4% 4% 4% 4% 4% Maximum Output Power 200W 200W 200W 200W 200W 200W 200W 200W 200W 200W 200W 200W 200W 200W 200W 200W 200W 200W (1) Add suffix “C” for enclosed format, e.g. TM200-Q45C. (2) Peak current is 12A on +12V, 9A on +15V and 6A on +24V. (3) Output #4 is floating. It can be connected externally for positive or negative output. (4) 200 watts for “C” version with a cover-and-fan assembly. 150 watts U-bracket version without moving air (maximum current of output #1 & #2 derated to 70%), or 200 watts with 25 CFM forced air provided by user. (5) When the remote sense facility is not used, +Sense must be connected to +V, and –Sense to return, on P2 connector. (6) All models may be operated at no-load. At no-load, output voltage tolerance increases to 10% MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector P1 is Beau Inc. P/N 72-5-03C, output connector P2 is Beau Inc. P/N 72-5-09C. Screws are #6-32 on 0.375 inch centers. 4. Connector P3 mates with Molex housing 22-01-1043 and Molex 40445 series crimp terminal. 5. Connector P4 mates with Molex housing 22-01-1023 and Molex 40445 series crimp terminal. 6. P4 is for DC fan rated 24V/0.12A (models TM200-S24, -S30, -D25), or 12V/0.2A (other models) 7. Weight: 1.40 Kgs (3.08Lbs.) approx. for U-bracket version 1.60 Kgs (3.52 Lbs.) approx. for “C” version PIN CHART CON Product No. TM200-S05 TM200-S15 TM200-S30 TM200-D23 TM200-D25 TM200-T30 TM200-T32 TM200-Q40 TM200-Q42 TM200-Q45 PIN P1 1 TM200-S12 AC TM200-S24 LIVE TM200-S48 TM200-D24 AC LIVE TM200-T31 AC TM200-T33 LIVE TM200-Q41 AC TM200-Q44 LIVE 2 P2 3 1, 2 AC AC -SENSE NEUTRAL GROUND 3, 4, 5 RET. 6 P3 7 8 9 OUTPUT OUTPUT OUTPUT +SENSE #1 #1 #1 AC AC OUTPUT COM. OUTPUT N.C. NEUTRAL GROUND #1 RET. #2 AC AC OUTPUT COM. OUTPUT OUTPUT NEUTRAL GROUND #1 RET. #2 #3 AC AC OUTPUT COM. OUTPUT OUTPUT NEUTRAL GROUND #1 RET. #2 #3 1 2 3 4 FAN COM. RET. COM. RET. PFD COM. RET. COM. RET. COM. RET. COM. RET. COM. RET. COM. RET. N.C. N.C. FAN N.C. N.C. FAN OUTPUT OUTPUT #4 #4 RETURN FAN Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com PFD PFD PFD