MICROCHIP TC4420CAT

TC4420/TC4429
6A High-Speed MOSFET Drivers
Features
General Description
• Latch-Up Protected: Will Withstand >1.5A
Reverse Output Current
• Logic Input Will Withstand Negative Swing Up To
5V
• ESD Protected: 4 kV
• Matched Rise and Fall Times:
- 25 ns (2500 pF load)
• High Peak Output Current: 6A
• Wide Input Supply Voltage Operating Range:
- 4.5V to 18V
• High Capacitive Load Drive Capability: 10,000 pF
• Short Delay Time: 55 ns (typ.)
• CMOS/TTL Compatible Input
• Low Supply Current With Logic ‘1’ Input:
- 450 µA (typ.)
• Low Output Impedance: 2.5
• Output Voltage Swing to Within 25 mV of Ground
or VDD
• Space-Saving 8-Pin SOIC and 8-Pin 6x5 DFN
Packages
The TC4420/TC4429 are 6A (peak), single-output
MOSFET drivers. The TC4429 is an inverting driver
(pin-compatible with the TC429), while the TC4420 is a
non-inverting driver. These drivers are fabricated in
CMOS for lower power and more efficient operation
versus bipolar drivers.
Both devices have TTL/CMOS compatible inputs that
can be driven as high as VDD + 0.3V or as low as –5V
without upset or damage to the device. This eliminates
the need for external level-shifting circuitry and its
associated cost and size. The output swing is rail-to-rail,
ensuring better drive voltage margin, especially during
power-up/power-down sequencing. Propagational
delay time is only 55 ns (typ.) and the output rise and fall
times are only 25 ns (typ.) into 2500 pF across the
usable power supply range.
Unlike other drivers, the TC4420/TC4429 are virtually
latch-up proof. They replace three or more discrete
components, saving PCB area, parts and improving
overall system reliability.
Applications
•
•
•
•
Switch-Mode Power Supplies
Motor Controls
Pulse Transformer Driver
Class D Switching Amplifiers
Package Types(1)
VDD
INPUT
NC
GND
1
2
3
TC4420
8
TC4420
TC4429
4
7
6
5
Note 1:
2:
VDD
OUTPUT
OUTPUT
GND
8-Pin DFN(2)
TC4429
VDD
OUTPUT
OUTPUT
GND
VDD 1
INPUT 2
NC 3
TC4420
TC4429
GND 4
Duplicate pins must both be connected for proper operation.
Exposed pad of the DFN package is electrically isolated.
 2002-2012 Microchip Technology Inc.
TC4420 TC4429
8
VDD
7
OUTPUT OUTPUT
6
OUTPUT OUTPUT
5
GND
5-Pin TO-220
Tab is
Common
to VDD
VDD
TC4420
TC4429
GND
INPUT
GND
VDD
GND
OUTPUT
8-Pin CERDIP/
PDIP/SOIC
DS21419D-page 1
TC4420/TC4429
Functional Block Diagram
VDD
500 µA
TC4429
Inverting
300 mV
Output
TC4420
Non-Inverting
Input
4.7V
GND
Effective
Input
C = 38 pF
DS21419D-page 2
 2002-2012 Microchip Technology Inc.
TC4420/TC4429
1.0
ELECTRICAL
CHARACTERISTICS
† Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only and functional operation of the device
at these or any other conditions above those indicated in the
operation sections of the specifications is not implied.
Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability.
Absolute Maximum Ratings†
Supply Voltage ..................................................... +20V
Input Voltage .................................. – 5V to VDD + 0.3V
Input Current (VIN > VDD)................................... 50 mA
Power Dissipation (TA 70°C)
5-Pin TO-220 .................................................... 1.6W
CERDIP ....................................................... 800 mW
DFN ............................................ ...................Note 2
PDIP ............................................................ 730 mW
SOIC............................................................ 470 mW
Package Power Dissipation (TA 25°C)
5-Pin TO-220 (With Heatsink) ........................ 12.5W
Thermal Impedances (To Case)
5-Pin TO-220 RJ-C ...................................... 10°C/W
DC CHARACTERISTICS
Electrical Specifications: Unless otherwise noted, TA = +25°C with 4.5V  VDD  18V.
Parameters
Sym
Min
Typ
Max
Units
Conditions
Logic ‘1’, High Input
Voltage
VIH
2.4
1.8
—
V
Logic ‘0’, Low Input Voltage
VIL
—
1.3
0.8
V
Input Voltage Range
VIN
–5
—
VDD+0.3
V
Input Current
IIN
–10
—
+10
µA
0VVINVDD
VOH
VDD – 0.025
—
—
V
DC TEST
Low Output Voltage
VOL
—
—
0.025
V
DC TEST
Output Resistance, High
ROH
—
2.1
2.8

IOUT = 10 mA, VDD = 18V
Output Resistance, Low
ROL
—
1.5
2.5

IOUT = 10 mA, VDD = 18V
Peak Output Current
IPK
—
6.0
—
A
VDD = 18V
Latch-Up Protection
Withstand Reverse Current
IREV
—
> 1.5
—
A
Duty cycle2%, t 300 µsec
Rise Time
tR
—
25
35
ns
Figure 4-1, CL = 2,500 pF
Fall Time
tF
—
25
35
ns
Figure 4-1, CL = 2,500 pF
Delay Time
tD1
—
55
75
ns
Figure 4-1
Delay Time
tD2
—
55
75
ns
Figure 4-1
IS
—
—
0.45
55
1.5
150
mA
µA
VIN = 3V
VIN = 0V
VDD
4.5
—
18
V
Input
Output
High Output Voltage
Switching Time (Note 1)
Power Supply
Power Supply Current
Operating Input Voltage
Note 1:
2:
Switching times ensured by design.
Package power dissipation is dependent on the copper pad area on the PCB.
 2002-2012 Microchip Technology Inc.
DS21419D-page 3
TC4420/TC4429
DC CHARACTERISTICS (OVER OPERATING TEMPERATURE RANGE)
Electrical Specifications: Unless otherwise noted, over operating temperature range with 4.5V  VDD  18V.
Parameters
Sym
Min
Typ
Max
Units
Conditions
Logic ‘1’, High Input
Voltage
VIH
2.4
—
—
V
Logic ‘0’, Low Input Voltage
VIL
—
—
0.8
V
Input Voltage Range
VIN
–5
—
VDD + 0.3
V
Input Current
IIN
–10
—
+10
µA
0VVINVDD
VOH
VDD – 0.025
—
—
V
DC TEST
Low Output Voltage
VOL
—
—
0.025
V
DC TEST
Output Resistance, High
ROH
—
3
5

IOUT = 10 mA, VDD = 18V
Output Resistance, Low
ROL
—
2.3
5

IOUT = 10 mA, VDD = 18V
Rise Time
tR
—
32
60
ns
Figure 4-1, CL = 2,500 pF
Fall Time
tF
—
34
60
ns
Figure 4-1, CL = 2,500 pF
Delay Time
tD1
—
50
100
ns
Figure 4-1
Delay Time
tD2
—
65
100
ns
Figure 4-1
IS
—
—
0.45
60
3
400
mA
µA
VIN = 3V
VIN = 0V
VDD
4.5
—
18
V
Input
Output
High Output Voltage
Switching Time (Note 1)
Power Supply
Power Supply Current
Operating Input Voltage
Note 1:
Switching times ensured by design.
TEMPERATURE CHARACTERISTICS
Electrical Specifications: Unless otherwise noted, all parameters apply with 4.5V  VDD  18V.
Parameters
Sym
Min
Typ
Max
Units
Specified Temperature Range (C)
TA
0
—
+70
°C
Specified Temperature Range (I)
TA
–25
—
+85
°C
Specified Temperature Range (E)
TA
–40
—
+85
°C
Specified Temperature Range (V)
TA
–40
—
+125
°C
Maximum Junction Temperature
TJ
—
—
+150
°C
Storage Temperature Range
TA
–65
—
+150
°C
Conditions
Temperature Ranges
Package Thermal Resistances
Thermal Resistance, 5L-TO-220
JA
—
71
—
°C/W
Thermal Resistance, 8L-CERDIP
JA
—
150
—
°C/W
Thermal Resistance, 8L-6x5 DFN
JA
—
33.2
—
°C/W
Thermal Resistance, 8L-PDIP
JA
—
125
—
°C/W
Thermal Resistance, 8L-SOIC
JA
—
155
—
°C/W
DS21419D-page 4
Typical four-layer board
with vias to ground plane.
 2002-2012 Microchip Technology Inc.
TC4420/TC4429
2.0
Note:
TYPICAL PERFORMANCE CURVES
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein
are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore outside the warranted range.
Note: Unless otherwise indicated, TA = +25°C with 4.5V  VDD  18V.
120
100
80
C L = 10,000 pF
80
Time (nsec)
Time (nsec)
100
60
C L = 4700 pF
40
C L = 2200 pF
5
7
9
11
13
C L = 4700 pF
40
C L = 2200 pF
20
20
0
C L = 10,000 pF
60
0
15
5
7
Supply Voltage (V)
Rise Time vs. Supply
FIGURE 2-4:
Voltage.
100
80
80
60
60
VDD = 5V
40
VDD = 12V
VDD = 18V
20
13
15
40
VDD = 5V
VDD = 12V
VDD = 18V
20
10
1000
10
1000
10,000
10,000
Capcitive Load (pF)
FIGURE 2-2:
Load.
Capacitive Load (pF)
Rise Time vs. Capacitive
FIGURE 2-5:
Load.
50
Fall Time vs. Capacitive
84
C L = 2200 pF
VDD = 18V
VDD = 15V
70
40
t D2
30
Supply Current (mA)
Delay Time (nsec)
11
Fall Time vs. Supply
100
Time (nsec)
Time (nsec)
FIGURE 2-1:
Voltage.
9
Supply Voltage (V)
t D1
20
10
56
42
500 kHz
28
200 kHz
14
20 kHz
0
–60
FIGURE 2-3:
Temperature.
–20
20
60
TA (°C)
100
140
Propagation Delay Time vs.
 2002-2012 Microchip Technology Inc.
0
0
FIGURE 2-6:
Capacitive Load.
100
1000
Capacitive Load (pF)
10,000
Supply Current vs.
DS21419D-page 5
TC4420/TC4429
Note: Unless otherwise indicated, TA = +25°C with 4.5V  VDD  18V.
50
5
C L = 2200 pF
VDD = 18V
40
30
ROUT (Ω )
Time (nsec)
100 mA
4
t FALL
t RISE
20
50 mA
10 mA
3
10
0
–60
–20
FIGURE 2-7:
Temperature.
20
60
TA (°C)
100
2
140
Rise and Fall Times vs.
5
7
9
11
13
Supply Voltage (V)
15
FIGURE 2-10:
High-State Output
Resistance vs Supply Voltage.
65
200
Load = 2200 pF
160
Delay Time (nsec)
Delay Time (nsec)
60
55
tD2
50
45
tD1
120
Input 2.4V
Input 3V
80
Input 5V
40
40
35
4
6
8
10
12
14
16
Input 8V and 10V
0
18
5
6
7
Supply Voltage (V)
FIGURE 2-8:
Supply Voltage.
Propagation Delay Time vs.
8
9 10 11 12 13 14 15
VDD (V)
FIGURE 2-11:
Effect of Input Amplitude on
Propagation Delay.
2.5
1000
CL = 2200 pF
10V
100
5V
10
2
ROUT (Ω )
Supply Current (mA)
18V
100 mA
50 mA
1.5
10 mA
0
0
FIGURE 2-9:
Frequency.
DS21419D-page 6
100
1000
Frequency (kHz)
10,000
Supply Current vs.
1
5
7
9
11
13
Supply Voltage (V)
15
FIGURE 2-12:
Low-State Output
Resistance vs. Supply Voltage.
 2002-2012 Microchip Technology Inc.
TC4420/TC4429
Note: Unless otherwise indicated, TA = +25°C with 4.5V  VDD  18V.
Crossover Area (A•S) x 10
-8
4
3
2
1
0
5
6
7
8
9 10 11 12 13 14 15
Supply Voltage (V)
The values on this graph represent the loss seen
by the driver during one complete cycle. For a
single transition, divide the value by 2.
FIGURE 2-13:
Crossover Energy.
 2002-2012 Microchip Technology Inc.
DS21419D-page 7
TC4420/TC4429
3.0
PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1:
PIN FUNCTION TABLE
Pin No.
8-Pin CERDIP/
PDIP/SOIC
Pin No.
8-Pin DFN
Pin No.
5-Pin TO-220
Symbol
1
1
—
VDD
2
2
1
INPUT
3
3
—
NC
4
4
2
GND
Ground
5
5
4
GND
Ground
6
6
5
OUTPUT
CMOS push-pull output
7
7
—
OUTPUT
CMOS push-pull output
3.1
Description
Supply input, 4.5V to 18V
Control input, TTL/CMOS compatible input
No Connection
8
8
3
VDD
Supply input, 4.5V to 18V
—
PAD
—
NC
Exposed Metal Pad
—
—
TAB
VDD
Metal Tab is at the VDD Potential
Supply Input (VDD)
The VDD input is the bias supply for the MOSFET driver
and is rated for 4.5V to 18V with respect to the ground
pins. The VDD input should be bypassed to ground with
a local ceramic capacitor. The value of the capacitor
should be chosen based on the capacitive load that is
being driven. A minimum value of 1.0 µF is suggested.
3.3
The MOSFET driver output is a low-impedance,
CMOS, push-pull style output capable of driving a
capacitive load with 6.0A peak currents. The MOSFET
driver output is capable of withstanding 1.5A peak
reverse currents of either polarity.
3.4
3.2
Control Input
The MOSFET driver input is a high-impedance,
TTL/CMOS compatible input. The input circuitry of the
TC4420/TC4429 MOSFET driver also has a “speedup” capacitor. This helps to decrease the propagation
delay times of the driver. Because of this, input signals
with slow rising or falling edges should not be used, as
this can result in double-pulsing of the MOSFET driver
output.
DS21419D-page 8
CMOS Push-Pull Output
Ground
The ground pins are the return path for the bias current
and the high peak currents that discharge the load
capacitor. The ground pins should be tied into a ground
plane or have very short traces to the bias supply
source return.
3.5
Exposed Metal Pad
The exposed metal pad of the 6x5 DFN package is not
internally connected to any potential. Therefore, this
pad can be connected to a ground plane or other
copper plane on a printed circuit board (PCB) to aid in
heat removal from the package.
 2002-2012 Microchip Technology Inc.
TC4420/TC4429
4.0
APPLICATIONS INFORMATION
+5V
90%
Input
VDD = 18V
0V
tD1
tD2
tF
+18V
4.7 µF
1
10%
tR
90%
90%
Output
8
0.1 µF
0.1 µF
10%
10%
0V
Inverting Driver
Input
2
6
TC4429
Output
7
CL = 2,500 pF
+5V
90%
Input
4
5
0V
+18V
Input: 100 kHz,
square wave,
tRISE = tFALL  10 ns
10%
tD1 90%
tR
Output
0V
10%
tD2
90%
tF
10%
Non-Inverting Driver
TC4420
Note: Pinout shown is for the PDIP, SOIC, DFN and CERDIP packages.
FIGURE 4-1:
Switching Time Test Circuits.
 2002-2012 Microchip Technology Inc.
DS21419D-page 9
TC4420/TC4429
5.0
PACKAGING INFORMATION
5.1
Package Marking Information
5-Lead TO-220
XXXXXXXXX
XXXXXXXXX
YYWWNNN
8-Lead CERDIP (300 mil)
XXXXXXXX
XXXXXNNN
YYWW
8-Lead DFN
XXXXXXX
XXXXXXX
XXYYWW
NNN
Legend: XX...X
Y
YY
WW
NNN
e3
*
Note:
DS21419D-page 10
Example:
TC4420CAT
0419256
Example:
TC4420
MJA256
0419
Example:
TC4420
EMF
0419
256
Customer-specific information
Year code (last digit of calendar year)
Year code (last 2 digits of calendar year)
Week code (week of January 1 is week ‘01’)
Alphanumeric traceability code
Pb-free JEDEC designator for Matte Tin (Sn)
This package is Pb-free. The Pb-free JEDEC designator ( e3 )
can be found on the outer packaging for this package.
In the event the full Microchip part number cannot be marked on one line, it will
be carried over to the next line, thus limiting the number of available
characters for customer-specific information.
 2002-2012 Microchip Technology Inc.
TC4420/TC4429
Package Marking Information (Continued)
8-Lead PDIP (300 mil)
XXXXXXXX
XXXXXNNN
YYWW
8-Lead SOIC (150 mil)
XXXXXXXX
XXXXYYWW
NNN
 2002-2012 Microchip Technology Inc.
Example:
TC4420
CPA256
0419
Example:
TC4420
EOA0419
256
DS21419D-page 11
TC4420/TC4429
5-Lead Plastic Transistor Outline (AT) (TO-220)
Note:
For the most current package drawings, please see the Microchip Packaging Specification located
at http://www.microchip.com/packaging
L
H1
Q
b
e3
e1
E
e
ØP
EJECTOR PIN
a (5X)
C1
A
J1
F
D
Units
Dimension Limits
e
Lead Pitch
Overall Lead Centers
Space Between Leads
Overall Height
Overall Width
Overall Length
Flag Length
Flag Thickness
Through Hole Center
Through Hole Diameter
Lead Length
Base to Bottom of Lead
Lead Thickness
Lead Width
Mold Draft Angle
e1
e3
A
E
D
H1
F
Q
P
L
J1
C1
b
a
INCHES*
MIN
MAX
.060
.072
.263
.273
.030
.040
.160
.190
.385
.415
.560
.590
.234
.258
.045
.055
.103
.113
.146
.156
.540
.560
.090
.115
.022
.014
.025
.040
3°
7°
MILLIMETERS
MAX
MIN
1.52
1.83
6.68
6.93
0.76
1.02
4.06
4.83
9.78
10.54
14.22
14.99
5.94
6.55
1.14
1.40
2.62
2.87
3.71
3.96
14.22
13.72
2.29
2.92
0.36
0.56
0.64
1.02
3°
7°
*Controlling Parameter
Notes:
Dimensions D and E1 do not include mold flash or protrusions. Mold flash or
protrusions shall not exceed .010" (0.254mm) per side.
JEDEC equivalent: TO-220
Drawing No. C04-036
DS21419D-page 12
 2002-2012 Microchip Technology Inc.
TC4420/TC4429
8-Lead Ceramic Dual In-line – 300 mil (JA) (CERDIP)
Note:
For the most current package drawings, please see the Microchip Packaging Specification located
at http://www.microchip.com/packaging
E1
2
1
n
D
E
A2
A
c
L
B1
eB
B
A1
Units
Dimension Limits
n
p
Number of Pins
Pitch
Top to Seating Plane
Standoff §
Shoulder to Shoulder Width
Ceramic Pkg. Width
Overall Length
Tip to Seating Plane
Lead Thickness
Upper Lead Width
Lower Lead Width
Overall Row Spacing
*Controlling Parameter
JEDEC Equivalent: MS-030
A
A1
E
E1
D
L
c
B1
B
eB
p
MIN
.160
.020
.290
.230
.370
.125
.008
.045
.016
.320
INCHES*
NOM
8
.100
.180
.030
.305
.265
.385
.163
.012
.055
.018
.360
MAX
.200
.040
.320
.300
.400
.200
.015
.065
.020
.400
MILLIMETERS
NOM
8
2.54
4.06
4.57
0.51
0.77
7.37
7.75
5.84
6.73
9.40
9.78
3.18
4.13
0.20
0.29
1.14
1.40
0.41
0.46
8.13
9.15
MIN
MAX
5.08
1.02
8.13
7.62
10.16
5.08
0.38
1.65
0.51
10.16
Drawing No. C04-010
 2002-2012 Microchip Technology Inc.
DS21419D-page 13
TC4420/TC4429
8-Lead Plastic Dual Flat No Lead Package (MF) 6x5 mm Body (DFN-S) – Saw Singulated
Note:
For the most current package drawings, please see the Microchip Packaging Specification located
at http://www.microchip.com/packaging
DS21419D-page 14
 2002-2012 Microchip Technology Inc.
TC4420/TC4429
8-Lead Plastic Dual In-line (PA) – 300 mil (PDIP)
Note:
For the most current package drawings, please see the Microchip Packaging Specification located
at http://www.microchip.com/packaging
E1
D
2
n
1

E
A2
A
L
c
A1

B1
p
eB
B
Units
Dimension Limits
n
p
Number of Pins
Pitch
Top to Seating Plane
Molded Package Thickness
Base to Seating Plane
Shoulder to Shoulder Width
Molded Package Width
Overall Length
Tip to Seating Plane
Lead Thickness
Upper Lead Width
Lower Lead Width
Overall Row Spacing
Mold Draft Angle Top
Mold Draft Angle Bottom
* Controlling Parameter
§ Significant Characteristic
§
A
A2
A1
E
E1
D
L
c
B1
B
eB


MIN
.140
.115
.015
.300
.240
.360
.125
.008
.045
.014
.310
5
5
INCHES*
NOM
MAX
8
.100
.155
.130
.170
.145
.313
.250
.373
.130
.012
.058
.018
.370
10
10
.325
.260
.385
.135
.015
.070
.022
.430
15
15
MILLIMETERS
NOM
8
2.54
3.56
3.94
2.92
3.30
0.38
7.62
7.94
6.10
6.35
9.14
9.46
3.18
3.30
0.20
0.29
1.14
1.46
0.36
0.46
7.87
9.40
5
10
5
10
MIN
MAX
4.32
3.68
8.26
6.60
9.78
3.43
0.38
1.78
0.56
10.92
15
15
Notes:
Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed
.010” (0.254mm) per side.
JEDEC Equivalent: MS-001
Drawing No. C04-018
 2002-2012 Microchip Technology Inc.
DS21419D-page 15
TC4420/TC4429
8-Lead Plastic Small Outline (OA) – Narrow, 150 mil (SOIC)
Note:
For the most current package drawings, please see the Microchip Packaging Specification located
at http://www.microchip.com/packaging
E
E1
p
D
2
B
n
1

h
45
c
A2
A


L
Units
Dimension Limits
n
p
Number of Pins
Pitch
Overall Height
Molded Package Thickness
Standoff §
Overall Width
Molded Package Width
Overall Length
Chamfer Distance
Foot Length
Foot Angle
Lead Thickness
Lead Width
Mold Draft Angle Top
Mold Draft Angle Bottom
* Controlling Parameter
§ Significant Characteristic
A
A2
A1
E
E1
D
h
L

c
B


MIN
.053
.052
.004
.228
.146
.189
.010
.019
0
.008
.013
0
0
A1
INCHES*
NOM
8
.050
.061
.056
.007
.237
.154
.193
.015
.025
4
.009
.017
12
12
MAX
.069
.061
.010
.244
.157
.197
.020
.030
8
.010
.020
15
15
MILLIMETERS
NOM
8
1.27
1.35
1.55
1.32
1.42
0.10
0.18
5.79
6.02
3.71
3.91
4.80
4.90
0.25
0.38
0.48
0.62
0
4
0.20
0.23
0.33
0.42
0
12
0
12
MIN
MAX
1.75
1.55
0.25
6.20
3.99
5.00
0.51
0.76
8
0.25
0.51
15
15
Notes:
Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed
.010” (0.254mm) per side.
JEDEC Equivalent: MS-012
Drawing No. C04-057
DS21419D-page 16
 2002-2012 Microchip Technology Inc.
TC4420/TC4429
6.0
REVISION HISTORY
Revision D (December 2012)
Added a note to each package outline drawing.
 2002-2012 Microchip Technology Inc.
DS21419D-page 17
TC4420/TC4429
NOTES:
DS21419D-page 18
 2002-2012 Microchip Technology Inc.
TC4420/TC4429
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
PART NO.
Device
X
Temperature
Range
Device:
TC4420:
TC4429:
XX
XXX
X
Package
Tape and
Reel
PB Free
6A High-Speed MOSFET Driver, Non-Inverting
6A High-Speed MOSFET Driver, Inverting
Examples:
a)
TC4420CAT:
6A High-Speed MOSFET
Driver, Non-inverting,
TO-220 package,
0°C to +70°C.
b)
TC4420EOA:
6A High-Speed MOSFET
Driver, Non-inverting,
SOIC package,
-40°C to +85°C.
Temperature Range:
Package:
PB Free
C
I
E
V
=
=
=
=
0°C to +70°C (PDIP, SOIC, and TO-220 Only)
-25°C to +85°C (CERDIP Only)
-40°C to +85°C
-40°C to +125°C
AT
JA
= TO-220, 5-lead (C-Temp Only)
= Ceramic Dual In-line (300 mil Body), 8-lead
(I-Temp Only)
MF
= Dual, Flat, No-Lead (6X5 mm Body), 8-lead
MF713 = Dual, Flat, No-Lead (6X5 mm Body), 8-lead
(Tape and Reel)
PA
= Plastic DIP (300 mil Body), 8-lead
OA
= Plastic SOIC, (150 mil Body), 8-lead
OA713 = Plastic SOIC, (150 mil Body), 8-lead
(Tape and Reel)
G
= Lead-Free device*
= Blank
c)
TC4420VMF:
6A High-Speed MOSFET
Driver, Non-inverting,
DFN package,
-40°C to +125°C.
a)
TC4429CAT:
6A High-Speed MOSFET
Driver, Inverting,
TO-220 package,
0°C to +70°C
b)
TC4429EPA:
6A High-Speed MOSFET
Driver, Inverting,
PDIP package,
-40°C to +85°C
c)
TC4429VMF:
* Available on selected packages. Contact your local sales
representative for availability
6A High-Speed MOSFET
Driver, Inverting,
DFN package,
-40°C to +125°C
Sales and Support
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and
recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1.
2.
Your local Microchip sales office
The Microchip Worldwide Site (www.microchip.com)
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
Customer Notification System
Register on our web site (www.microchip.com/cn) to receive the most current information on our products.
 2002-2012 Microchip Technology Inc.
DS21419D-page 19
TC4420/TC4429
NOTES:
DS21419D-page 20
 2002-2012 Microchip Technology Inc.
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro,
PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash
and UNI/O are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MTP, SEEVAL and The Embedded Control Solutions
Company are registered trademarks of Microchip Technology
Incorporated in the U.S.A.
Silicon Storage Technology is a registered trademark of
Microchip Technology Inc. in other countries.
Analog-for-the-Digital Age, Application Maestro, BodyCom,
chipKIT, chipKIT logo, CodeGuard, dsPICDEM,
dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB
Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O,
Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA
and Z-Scale are trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
GestIC and ULPP are registered trademarks of Microchip
Technology Germany II GmbH & Co. & KG, a subsidiary of
Microchip Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2002-2012, Microchip Technology Incorporated, Printed in
the U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 9781620767948
QUALITY MANAGEMENT SYSTEM
CERTIFIED BY DNV
== ISO/TS 16949 ==
 2002-2012 Microchip Technology Inc.
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS21419D-page 21
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Japan - Osaka
Tel: 81-66-152-7160
Fax: 81-66-152-9310
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
China - Hangzhou
Tel: 86-571-2819-3187
Fax: 86-571-2819-3189
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
China - Hong Kong SAR
Tel: 852-2943-5100
Fax: 852-2401-3431
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
China - Shenzhen
Tel: 86-755-8864-2200
Fax: 86-755-8203-1760
Taiwan - Kaohsiung
Tel: 886-7-213-7828
Fax: 886-7-330-9305
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
DS21419D-page 22
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
11/27/12
 2002-2012 Microchip Technology Inc.