W005 THRU W10 Single Phase 1.5 AMPS. Silicon Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.5 Amperes RB-15 Features UL Recognized File # E-96005 Surge overload ratings to 40 amperes peak Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension Mechanical Data Case: Molded plastic Lead: solder plated Polarity: As marked Weight: 1.07 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol W005 W01 W02 W04 W06 W08 W10 Units Type Number Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V VRRM Maximum RMS Voltage 35 70 140 280 420 560 700 V VRMS Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V VDC Maximum Average Forward Rectified Current @TA = 50℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.5A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ Typical Thermal Resistance (Note) Operating Temperature Range I(AV) 1.5 A IFSM 40 A VF 1.0 V 10 500 36 13 -55 to +125 -55 to +150 uA uA IR RθJA RθJL TJ ℃/W TSTG Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. With 0.4 x 0.4” (10 x 10mm) Copper Pads. Storage Temperature Range - 662 - ℃ ℃ RATINGS AND CHARACTERISTIC CURVES (W005 THRU W10) FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 1.6 AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 50 40 30 20 10 0 1 2 5 10 20 50 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 100 80 60 40 20 100 120 o NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE. ( C) FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 10 20 INSTANTANEOUS REVERSE CURRENT. ( A) INSTANTANEOUS FORWARD CURRENT. (A) 10 Tj=25oC Pulse Width=300 s 1% Duty Cycle 1 0.1 Tj=100 0C 1 0.1 Tj=25 0C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 0.01 1.4 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) - 663 - 140 140