IC299 Series (Test Contactor) HF Socket / Handler (Y Shaped SMT Contacts) Specifications 1,000M W min. at 500V DC Insulation Resistance: Dielectric Withstanding Voltage: 500V AC for 1 minute Contact Resistance: 30mW max. at 10m /20mV max. Operating Temperature Range: –20°C to +125°C Contact Force: 10g to 100g per pin within contact travel distance from 0.2 to 0.5mm Contact Inductance: 2nH max. Mating Cycles: 10,000 insertions min. Part Number (Details) IC299 - 016 77 (.AC*****) Series No. No. of Contact Pins Design Number Custom Design Number Materials and Finish Housing: PES / PEI (glass-filled) Contacts: Beryllium Copper (BeCu) Plating: Gold over Nickel Series Description The IC299 Test Contactor Series is ideal for automated and manual testing of SOP, SSOP, TSOP and QFP packages in any conceivable pitch size. For your specific device testing application, every IC299 Test Contactor can be designed and manufactured with or without a cover, or as a Clamshell Socket (see outline dimensions). The IC299 Series is for the testing of high frequency SOP and QFP devices up to 10GHz. The IC299 contactors pick up gullwing shaped leads on specially designed Y-shaped contacts, which allow an inductance of less than 2nH. Contact Details PCB and Pad Layout Top View from Socket Contact position (2.75) IC PCB Ordering Procedure Note: Each Test Contactor Socket is custom built. The customer must specify the number of contact pins, required pitch, all device parameters and any other special requirements. The final part number will be determined by Yamaichi. E-8 Available Package Types : SOP, SSOP, TSOP and QFP Pin Count: Any pin count from 8 to 304 pins is possible Available Pitch Sizes: 0.50, 0.65, 0.80 and 1.27mm Test & Burn-In SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE – DIMENSIONS IN MILLIMETER IC299 Series (Test Contactor) HF Socket / Handler (Y Shaped SMT Contacts) Various Examples of SOP and QFP Types SOP Socket Base (cover optional) SOP Socket Base - Mounting Figure Milling area SOP Clamshell Outline SOP Clamshell - Mounting Figure QFP Socket Base (cover optional) QFP Socket Base - Mounting Figure Cover Option SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE – DIMENSIONS IN MILLIMETER Test & Burn-In E-9