Model 2696 Turns Counting Dial 7/8” Diameter Analog For 1/4” Shaft SPECIFICATIONS1 Counting Capacity, Maximum Turns 10 Shaft Diameter 1/4" Bushing Diameter 3/8” Depth – Maximum from face of panel 0.900” Shaft Extension – Maximum from face of panel 0.781” Shaft Extension – Minimum from face of panel 0.620” Bushing Extension – Maximum from face of panel 0.300” Locking Mechanism Positive Action Weight, nominal 16 grams Number of set screws 1 Numeral Height 0.050” Knob Material Black Plastic Dial Finish White Numerals on Black Matte Housing Finish Satin Chrome Operating Temperature Range -55ºC to 71ºC OUTLINE DIMENSIONS (inch/mm) Mounting Surface .90±.02 22.9±0.5 40 50 60 6 70 .078 Dia. 1.98 1 90 0 50 .496±.010 12.6±0.25 0 .375 9.53 20 10 4 0 30 80 .406 Dia. 10.3 .875±.016 22.22±0.406 Specifications subject to change without notice. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 June 12, 2007 Website: www.bitechnologies.com page 1 of 1 BI technologies