BITECH 38WLABR100KLF30

MODEL 38
10 mm Single-Turn Trimmer
Dust Proof
Carbon Element
Low TCR
RoHS Compliant
STYLES AVAILABLE
Top Adjust
38P
Side Adjust
38W
ELECTRICAL1
Resistance Range
100 to 1,000,000 Ohms
Standard Resistance Tolerance
± 30%, (±20% and ±10% available)
Input Voltage, Maximum
200 Vdc
Power rating, Watts
Linear :0.15W, others : 0.07W, at 50°C
End Resistance, Maximum
2 ohms or 0.5% whichever is greater
Actual Electrical Travel
220° ±20°
Insulation Resistance, Minimum
100 Megohms
Resolution
Essentially infinite
Contact Resistance Variation
5% Max.
Temperature Coefficient of Resistance
±500 ppm/°C
MECHANICAL
Torque, Maximum
1.5 in - oz.
Wiper Position
Approx. 50%
ENVIRONMENTAL
Operating Temperature Range
-25°C to +70°C
Rotational Life, 500 Cycles
±3% ∆R
Load Life, 0.15W, 100 Hours, 50°C
±5% ∆R
Resistance to Solder Heat
260°C for 3 sec.
Aqueous cleaning not recommended
1
Specifications subject to change without notice.
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: 714 447 2345
April 16, 2007
Website: www.bitechnologies.com
page 1 of 3
BI technologies
MODEL 38
ORDERING INFORMATION2
38 W L A B R100K LF 30
Model Series
Styles
Tolerance :
10 - ±10%
20 - ±20%
30 - ±30%
RoHS Compliant Product Code
Rotor Options ( see below )
Total Resistance
PCB Layout ( see below )
Std. Package 500 pc/bag
Taper : A,B,C ( see below )
Rotor Options
PCB Layout Options
2
Contact our customer service for custom designs and features.
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: 714 447 2345
April 16, 2007
Website: www.bitechnologies.com
page 2 of 3
BI technologies
MODEL 38
Taper Options
CIRCUIT DIAGRAM
STANDARD RESISTANCE VALUES AND MARKING
100
500
1K
2K
5K
10K
20K
50K
100K
200K
500K
1MEG
OUTLINE DRAWING3
Model 38P (Top Adjust)
3
Model 38W (Side Adjust)
Dimensions are in millimeters, Tolerances are ±.025 mm unless otherwise stated.
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: 714 447 2345
April 16, 2007
Website: www.bitechnologies.com
page 3 of 3
BI technologies