MODEL 7720 SERIES Power Factor Correction Module MODELS/RANGE 7720-1A 7720-2A 7720-3A 1,500 Watts / 3,000 Watts* 1,000 Watts / 2,250 Watts* 500 Watts / 1,500 Watts* FEATURES AND BENEFITS • Module contains all power components necessary to provide power factor correction in a switching power supply. - Rectifier bridge - Ultrafast platinum output diode - 500V .1Ω Max. FET (7720-1A) • Provides optimum use of available line current • Allows power supply to meet harmonic requirement • Module design reduces cost of heat sink • Saves significant space and assembly time • Low cost • Internal temperature sensing • Replaces up to 10 each TO-220 or TO-247 discrete power semiconductors • Custom module versions available to meet specific requirements such as: - Motor drives - Power servo amplifiers - Solenoid drivers - Solid state relays - 3 phase rectifier bridges APPLICATIONS Designed to optimally facilitate a boost type power factor correction (PFC) system for designs with up to 20 A rms input current. Standard applications include switching power supplies from 500 watts to 3,000 watts with line voltages up to 300 V rms. * Based on minimun line voltage of 84 V rms / 168 V rms. Specifications subject to change without notice. 7-27 Model 7720 Series 7 ELECTRICAL CHARACTERISTICS FET Parameter Drain Leakage Current Symbol IDSS On-State Voltage VDS(on) Threshold Voltage Gate Leakage Current VGS(th) IGSS Diode Forward Voltage VSD Input Capacitance Ciss Gate Resistor RG Junction Temperature Thermal Resistance Tj Rthjc D1-D4 Reverse Leakage Current Forward Voltage D5 TH1 IR VF Junction Temperature Thermal Resistance Tj Rthjc Forward Voltage VF Forward Voltage VF Reverse Leakage Current Reverse Leakage Current Reverse Recovery Time Reverse Recovery Time Junction Temperature Thermal Resistance IR IR trr trr Tj Rthjc Resistance Resistance Ratio R25 RT/R25 Dissipation Constant Thermal Time Constant PD t Conditions1 VDS = 500V, VGS = 0V 7720-X -1 -2 -3 IDS = 28A, VGS = 10V -1 IDS = 21A -2 IDS = 14A -3 VDS = 4V, IDS = 1mA -1,-2,-3 VGS = ±15V, VDS = 0V -1 -2 -3 ISD = 50A, VGS = 0V -1 ISD = 37.5A -2 ISD = 25A -3 VGS = 0V, VDS = 25V, f = 1.0MHz -1 -2 -3 -1 -2 -3 -1,-2,-3 -1 -2 -3 VR = 600V -1,-2,-3 IF = 25A -1,-2 IF = 18A -3 -1,-2,-3 -1,-2 -3 IF = 25A -1,-2 IF = 18A -3 IF = 25A, t = 150°C -1,-2 IF = 18A -3 VR = 600V -1,-2,-3 VR = 600V, t = 150°C -1,-2,-3 IF = 1.0A, di/dt = 100A/µs -1,-2,-3 IF = 25A, di/dt = 100A/µs -1,-2,-3 -1,-2,-3 -1,-2 -3 I = 1mA t = 80 t = 90 t = 100 t = 110 Min. Typ. 2.0 2.2 2.2 2.2 3.0 0.95 0.95 0.95 12 9 6 1.28 1.70 2.55 Max. 1.0 750 500 2.9 2.9 2.9 4.0 ±2 ±1.5 ±1 1.5 1.5 1.5 150 0.19 0.25 0.38 1 1.0 1.0 1.3 1.4 1.5 1.5 1.3 1.3 1 0.3 30 40 22.5 250 1.2 1.2 150 2.8 2.8 2.5 2.5 500 1.5 40 45 175 1.3 1.4 25 27.5 0.126 0.0916 0.0679 0.0511 1.0 10 Units mA µA µA V V V V µA µA µA V V V nF nF nF Ω Ω Ω °C °C/W °C/W °C/W µA V V °C °C/W °C/W V V V V µA mA ns ns °C °C/W °C/W KΩ mW/°C sec 1 - TCase = 25°C unless otherwise specified. 7-28 Model 7720 Series ENVIRONMENTAL Storage Temperature Range Operating Temperature Range Recommended Operating Case Temperature, Max. -55°C to +125°C -40°C to +125°C +100°C SYSTEM DIAGRAM 5 In Rush Control Circuit 2 3 AC Line 420 L40 EMI Filter 25A Pin 1: AC 1 Pin 2: + Pin 3: Drain Pin 4: Drain Pin 5: Anode Pin 6: Cathode Pin 7: TH 1 Pin 8: TH 2 Pin 9: Gate Pin 10: Source Pin 11: Source Pin 12: Pin 13: AC 2 4 D 1 10Ω Dotted Line denotes – BI Model 7720 and associated pins. 390 Vdc 6 + G S 13 T 12 11 10 9 8 7 +18 Vdc Gate Driver PWM Aux Power with UVLO Thermal Shutdown Circuitry 7 7-29 Model 7720 Series OUTLINE DIMENSIONS (Inch) 2.230 Max. 1.800 .200 6x 4x Ø .280 x .060 Deep 4x Ø .150 Thru 4x R.215 1.380 Max. 1.100±.015 (CL to CL) .950 Pin #1 Marking Surface .300±.010 Pin .020 x .040 13 Places .240±.015 .200 7720-1A Lot No. Date Code ORDERING INFORMATION 77 2 0 1A Power Level: -1A = 1,500W to 3,000W -2A = 1,000W to 2,250W -3A = 500W to 1,500W Model Package Size Circuit Function: 0 = Power Factor Correction 7-30 Model 7720 Series