M ICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION MIN TYP MAX UNITS 900 MHz 4.5 VDC 5.0 5.25 VDC 0 +3.0 dBm Lower Frequency: Upper Frequency: 940 Tuning Voltage: 0.5 Supply Voltage: 4.75 Output Power: -3.0 Supply Current: MHz 17 nd mA Harmonic Suppression (2 Harmonic): -20 Pushing: 0.5 1.0 MHz/V Pulling, all Phases: 1.0 2.0 MHz pk-pk Tuning Sensitivity: dBc 28 MHz/V Phase Noise @ 10kHz offset: -104 dBc/Hz Phase Noise @ 100kHz offset: -123 dBc/Hz Load Impedance: 50 Input Capacitance: 100 pF Operating Temperature Range: -40 +85 °C Storage Temperature Range: -45 +90 °C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com M ICROWAVE A Division of Crystek Corporation BOTTOM VIEW 0.354 (9.00) [RF] SIDE VIEW [GND] Gold Finish Solder Mask Solder/Cover BOTTOM ORIENTATION MARK [Vcc] [Vt] 0.066 (1.68) 0.033 (0.84) 0.185 (4.70) 4 5 6 TOP VIEW 0.500 (12.70) CRYSTEK CVCO45CL 0900-0940 YYWW 0.400 (10.16) 0.380 (9.65) 0.062 SQ (1.52) SQ PAD LOCATION 3 2 Pad Connection 1 3 4 Others Vt Vcc RF-OUTPUT GROUND 1 0.354 (9.00) Unless otherwise specified, Dimensions are in: IN (mm) Pad Location Dimensions are in: Inches TOP ORIENTATION MARK TAPE AND REEL 0.059 Ø TYP (1.50 Ø) TYP 0.157±0.004 (4.00±0.10) 0.945±0.012 (24.00±0.30) DIRECTION OF FEED 0.630±0.004 (16.00±0.10) Drawing not to scale Product Control: Crystek Part Number: CVCO45CL-0900-0940 Release Date: 24-March-08 Revision Level: C Responsible: C. Vales CRYSTEK CORPORATION Specification is subject to change without notice Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com