Part Number: CXOH20-BP-10.000 Applications Test Equipment RF Sources Features High Stability Excellent Phase Noise AT-Cut Crystal Mechanical Trimmer Frequency Options 10.000 MHz 16.000 MHz 20.000 MHz 25.000 MHz FREQUENCY STABILITIES MIN TYP MAX UNITS CONDITIONS Frequency Overall Stability -1.0 +1.0 PPM -10° to +60°C (reference @ 25°C) Frequency vs Input Voltage -0.3 +0.3 PPM for ±5.0% change in Vcc Frequency vs Load -0.3 +0.3 PPM Frequency vs 1 year aging -1.0 +1.0 PPM Frequency adjustment range ±3.0 Supply Voltage / Current Supply Voltage Signal Level (Voh) Load CONDITIONS TYP MAX UNITS +4.5 +5 +5.5 VDC 20 mA MAX UNITS MIN TYP 4.5 CONDITIONS VDC Signal Level (Vol) Duty Cycle mechanical trim MIN Supply Current HCMOS OUTPUT PPM 40 15 0.5 VDC 60 % @ Vcc/2 pF PN:CXOH20-BP-10.000 Rev. C Page 1 of 3 OUTPUT CHARACTERISTICS MIN TYP MAX -75 -105 -125 -135 -140 Phase Noise UNITS CONDITIONS dBc/Hz @ 10Hz Offset @ 100Hz Offset @ 1KHz Offset @ 10KHz Offset @ 100KHz Offset Start-Up Time 10 msec Rise Time, Fall Time 5 nsec MAX UNITS 7 VDC +90 °C 50 pF ABSOLUTE MAXIMUM RATING MIN TYP Supply Voltage Storage Temperature -55 Load CONDITIONS ENVIRONMENTAL CONDITIONS SHOCK IEC 68-2-27 (Test Ea) 30G, 10mSec, Half Sine VIBRATION IEC 68-2-6 (Test Fc) 0.35mm, 10G, 5-500Hz, 6 cycles/axis THERMAL SHOCK IEC 68-2-14 (Test Na) 30 min. in each extreme temperature HUMIDITY MIL-STD-202 method 106D PN:CXOH20-BP-10.000 Rev. C Page 2 of 3 0.787 max (20.0 max) 0.600 ±0.012 (15.24 ±0.3) Ø 0.157 ±0.020 (Ø 4.0 ±0.5) 0.197 ±0.012 (5.0 ±0.3) Bottom View 1 2 0.787 max (20.0 max) 4 0.600 ±0.012 (15.24 ±0.3) 5 Pin Function 1 2 3 4 5 NC RF Output Supply Voltage Case Ground Case Ground 3 0.197 ±0.012 (5.0 ±0.3) 0.300 ±0.012 (7.62 ±0.3) Ø 0.020 ±0.004 (Ø 0.50 ±0.1) 0.300 ±0.012 (7.62 ±0.3) 0.394 ±0.020 (10.0 ±0.5) 0.197 ±0.039 (5.0 ±1.0) Unless otherwise specified, Dimensions are in: IN (mm) PN:CXOH20-BP-10.000 Rev. C Page 3 of 3