BI-COLOR LED BTL-32NRYGC Package Dimension Product Features Ultra Bright Bi-color Red/Green High Light Output 3mm Diameter Circular Package Water Clear Lens Highly Reliable IC Compatible Leads without Stand Off 26.5±0.5 1.5 Applications Green Automotive Front Panel Indicator Special Lighting General Purpose LEDs Red 3.0 Tolerance: ± inch Unit: ± 0.01 0.25 mm Optical and Electrical Characteristics at Ta=25ºC Parameter Luminous Intensity Symbol Iv Viewing Angle Green Red 2θ½ Dominant Wavelength λD DC Forward Voltage VF DC Reverse Current YG Red YG Red IR Minimum Typical Maximum Units － － 350 100 － － mcd － 30 － deg 620 570 1.9 1.8 － － － － 630 575 2.5 2.5 0 － 10 Conditions IF = 20mA nm V µA VR=5V Notes: 1. Light intensity measures the light sensing response standard using chromatic meter. Refer to the CIE eye-response curve set by International Lighting committee. Tolerance of minimum and maximum intensity = ± 15% 2. Wavelength range can be selected from the bin selection table. Tolerance of minimum and maximum = ± 2nm 3. These products are sensitive to static electricity and care must be fully taken when handling products Part No.: BTL-32NRYGC www.brilliance-tech.com Page 1 of 3 BI-COLOR LED BTL-32NRYGC Absolute Maximum Ratings at Ta=25ºC Symbol Parameter Max. Unit 100 mW PD Power Rating VR Reverse Voltage (IR=10µA) 5 V IF Continuous Forward Current 30 mA IFP Peak Forward Current (0.1 duty cycle @ 1kHz) 50 mA Derating Linear from 50ºC 0.4 mA/ºC Topr Operating Temperature Range –35 ~ + 80 ºC Tstg Storage Temperature Range –40 ~ + 100 ºC Lead Soldering Temperature [1.6mm (0.063inch) from body] 260℃ - max 5 seconds Packaging Options Standard: 1000 pc bulk pack Optional: Tape and Reel (Please specify when order) Part No.: BTL-32NRYGC www.brilliance-tech.com Page 2 of 3 BI-COLOR LED BTL-32NRYGC Typical Electro-Optical Characteristics Curves at Ta=25ºC Relative Luminous Intensity - IF Allowable Forward Current IF(mA) Relative Luminous Intensity 100.0 60 HR Ta=25° IF - V F Allowable Forward Current - Ta 5.0 3.0 MPG NPG 1.0 Ta=25° 50 80.0 HR 40 HR 60.0 30 PG 40.0 PG 20 20.0 10 0 Ambient Temperature(℃） Relative Luminous Intensity - Ta Wavelength Characteristics Ta=25° Relative Luminous Intensity Relative Luminous Intensity (%) PG PG HR Ambient Temperature Ta (°） THR Wavelength λ(nm) 0° 30° 30° 60° 60° 90° 0.75 0.5 0.25 0.25 0.5 0.75 90 BT-Rev. 1.0a Specifications are subject to change without notice. Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved. Part No.: BTL-32NRYGC www.brilliance-tech.com Page 3 of 3