P.C.B. LAYOUT RI & RIR CONSTRUCTION RI series 1. 2. 3. 4. 5. 6. RIR series RI series (raised actuator) and RIR series (recessed actuator) available for different purposes. Splay terminals allow for automatic insertion by IC insertion machine. Straight terminals are available for manual insertion. Low contact resistance, and self-clean on contact area. Gold plated electrical contact and terminal plating by gold gives excellent results when soldering. All materials are UL94V-0 grade fire retardant plastics. ITEM Description Materials Treatment 1 Actuator UL94V-0 Nylon Molded white 2 Cover UL94V-0 Nylon Molded black 3 Base UL94V-0 Nylon Molded black 4 Contact Beryllium Copper Gold plated at contact area 5 Terminal Brass CIRCUIT DIAGRAM Gold plated at contact area and gold plating at terminal DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com MODEL PROD NO. NO. OF POS DIM A RI/RIR-01 01 3.48 0.137 RI/RIR-02 02 6.02 0.237 RI/RIR-03 03 8.56 0.337 RI/RIR-04 04 11.1 0.437 RI/RIR-05 05 13.64 0.537 RI/RIR-06 06 16.18 0.637 RI/RIR-07 07 18.72 0.737 RI/RIR-08 08 21.26 0.837 RI/RIR-09 09 23.8 0.937 RI/RIR-10 10 26.34 1.037 RI/RIR-12 12 31.42 1.237 TERMINAL TYPE HOW TO ORDER SPECIFICATION ELECTRICAL Electrical life: 2000 operation cycles per switch 24VDC, 25mA. Non-Switching Rating: 100mA, 50 VDC Switching Rating: 25mA, 24VCD. Contact resistance: (a) 50mΩ max. at initial (b) 100mΩ max. after life test. Insulation resistance: 100MΩ min. (at 500VDC) Dielectric Strength: 500VAC/1 minute. Capacitance: 5pF max. Circuit: Single pole single throw MECHANICAL Mechanical life: 2000 operations per cycle switch Operation Force: 600gf max. Stroke: 0.9mm Operation Temp: -25° C to +70° C Storage Temp: -40° C to +85° C Vibration Test: MIL-STD-202F METHOD 201A Frequency: 10-55-10Hz/1 min Directions: X, Y, Z, three mutually perpendicular directions. Time: 2 hours each direction. High reliability. Shock Test: MIL-STD-202F METHOD 213B. CONDITION A GRAVITY: 50G (peak value), 11 m/sec. Direction and times: 6 sides and three times in each direction. High reliability. SOLDERING AND CLEANING PROCESSES For best results, please follow these recommendations: Keep all switch contacts in their "OFF" position for all operations. WAVE SOLDERING: Recommended solder temperature at 500 F (260° C) max. 5 seconds. HAND SOLDERING: Example: RI-08G-S is a Machine Insertable Type Dip Switch, Raised Actuator 8 position, splay terminal. PACKING All DIP switches are shipped in standard IC tubes with all poles in "OFF" position. Use a soldering iron of 30 watts, controlled at 608 F(320° C) approximately 2 seconds while applying solder. CLEANING PROCESS: Flux clean using force rinse, high agitation or triple bath cleaning method. Freon TF or TE give excellent results. When vapor methods are used, do not subject the switch to solvents at temperatures above 125 F (51° C). DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com